All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Metro delivery usually takes 2–4 business days after dispatch, and regional areas may take longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
Products
Bosch 6000 Series Alarm Kit with Smart WIFI Keypad, 3 x Bosch Gen2 PIRS and Accessories
The Bosch Solution 6000 kit with a CP737B Wi-Fi keypad and three PIRs is a commercial-grade, app-ready wired alarm for larger Australian homes and businesses. It pairs the powerful Solution 6000 panel with a 3.5-inch Wi-Fi smart-prox keypad and three Blue Line Gen2 PIR detectors, so it covers the main areas and connects to the iFob app over Wi-Fi straight after install.
What's in the box
- Bosch Solution 6000 control panel (up to 144 zones across up to 8 areas)
- Bosch CP737B Wi-Fi smart-prox keypad (3.5-inch colour)
- 3x Blue Line Gen2 PIR motion detectors (BPR2-W12, 12m)
- 18V transformer, 12V 7Ah battery, internal 120dB piezo siren and external siren with strobe
- Metal enclosure with tamper, 8x 3k3 + 8x 6k8 resistors and a manual
Bosch 6000 Series Alarm PCB Kit with Smart Keypad
The Bosch Solution 6000 PCB kit with the CP736B smart keypad is the bare foundation for a custom professional alarm. It includes the Solution 6000 control panel board, a colour graphic keypad with smart-card reader, an 18V transformer, a 12V 7Ah backup battery and a metal enclosure with tamper, so your installer can build the system from the ground up with the detectors, sirens and modules the site needs.
What's in the box
- Bosch Solution 6000 control panel (16 zones on board, expandable to 144 wired or wireless)
- Bosch CP736B 3.5-inch colour graphic keypad with integrated smart-card reader (not a touchscreen)
- 18V plug-pack transformer and 12V 7Ah backup battery
- Metal enclosure with tamper switch and a manual
- No detectors, no sirens and no IP module included (add to suit the site)
Bosch B338 Universal Ceiling‑mount Bracket
The Bosch B338 is a swiveling universal bracket that lets you ceiling-mount a Bosch motion detector and aim it exactly where you need it. The plastic surface-mount bracket gives a vertical swivel range of +7° to -16° and a horizontal range of ±45°, so you can point a wall-pattern detector down into a room from the ceiling. It suits many Bosch detector types, including the Blue Line range.
Key points
- Universal ceiling-mount bracket for many Bosch detectors
- Vertical swivel +7° to -16°, horizontal swivel ±45° for precise aiming
- Plastic, surface-mount, swiveling design
- Lets a wall-coverage detector be mounted centrally on the ceiling
- Note: pet immunity can no longer be assured once a detector is ceiling-mounted on this bracket
Bosch B426-M Ethernet IP Module for Solution 2000/3000/4000
The Bosch B426-M puts a Solution 2000, 3000 or 4000 alarm panel on the network: a four-wire bus module with an RJ-45 port that gives the panel two-way IP reporting to a monitoring centre, remote programming, and the internet path the RSC+ phone app runs over.
What you get
- 1 × B426-M Conettix Ethernet communication module PCB with the mounting screws and bracket for the enclosure's 3-hole pattern
You'll also need
- A compatible panel: the ICP-SOL3-P or ICP-SOL4-P board, or the panel inside a Solution 2000 or 3000 kit, at firmware V2.0 or higher for the cloud connection
- A Category 5 or better Ethernet lead from the module to the router, up to 100 m
- A keypad such as the IUI-SOL-ICON, or A-Link Plus software, to enable the module in panel programming
Bosch B810 RADION Wireless Receiver for Solution 3000/4000
The Bosch B810 is a 433.42 MHz RADION wireless receiver that connects compatible detectors, contacts, keyfobs, panic buttons and repeaters to a supported Bosch control panel over the SDI2 bus, with one receiver used per system.
What you get
- B810 wireless receiver, hardware pack and installation guide
You'll also need
- A compatible Solution panel: the ICP-SOL3-P or ICP-SOL4-P. On the Solution 4000, a B810 and a WE800EV2 cannot be fitted together
- RADION devices to receive: the RFDL-11 TriTech and RFPR-12 PIR detectors, RFDW-SM and RFDW-RM door and window contacts, the RFUN universal transmitter, RFKF-FBS keyfob and RFGB glass break
Bosch Blue Line Tritech PIR Detector 12m Pet Friendly up to 45KG BDL2-WP12G
The Bosch BDL2-WP12G is a Blue Line Gen2 TriTech motion detector that combines passive infrared (PIR) with microwave detection, so both technologies have to agree before it raises an alarm. That dual-technology approach cuts false alarms, and a selectable pet-immunity mode lets it ignore one or two pets up to 45 kg while still catching intruders. It covers 12 m x 12 m wall-to-wall and is a wired detector for a hardwired Bosch alarm panel.
Key points
- TriTech detection: PIR plus microwave (10.525 GHz) must both agree to alarm
- Selectable pet immunity for one or two pets up to 45 kg (100 lb)
- 12 m x 12 m (40 ft) wall-to-wall coverage, 94° angle
- First Step Processing and dynamic temperature compensation
- Wired detector: normally-closed relay alarm output plus tamper
- Mounting height 2.2 m to 2.75 m, no field adjustments; EN50131 Grade 2
- Note: pet immunity is not assured if the detector is ceiling-mounted
Bosch BO-48C18133A Power Supply 18V AC – 18 V AC Power Supply (Approx. 1.33 A)
The Bosch BO-48C18133A is an 18 V AC power supply for Bosch Solution alarm panels and other systems that need an 18 V AC input. It takes 240 V AC mains and delivers approximately 1.33 A of AC output through pre-attached bare-wire leads, making it a straightforward replacement or spare transformer for a Solution control panel. Because it outputs AC (not DC), it must match panels designed for an 18 V AC supply.
Key points
- 18 V AC output, approximately 1.33 A
- 240 V AC mains input
- AC output (not DC) - for panels that require 18 V AC
- Pre-attached bare-wire output leads for direct termination
- Compact, for panel or enclosure mounting
- Replacement or spare transformer for Bosch Solution systems; 3-year warranty
Bosch BOSISC-PB1-100 panic button
The Bosch ISC-PB1-100 (ND 100 GLT) is a wired panic button that connects to a zone on a standard intrusion alarm panel. Pressing it manually and discreetly triggers an alarm, for places at risk of a hold-up such as shops, offices and homes. It is a hardwired device with a built-in tamper contact.
Key points
- Wired panic / hold-up button for any standard intrusion panel zone
- DC circuit (GLT) technology with a built-in tamper contact
- Surface or flush cable mounting; optional cover cap to prevent false presses
- 12 to 30VDC, 0.5mA max; compact 81mm round ABS housing, 70g
- IP40, indoor use; 0 to 50 degrees C
- Supplied with adhesive seal and installation note
Before you buy
What customers ask most before ordering from this range — and how we deliver.
Which kit is right for me?
Start with three questions: how many areas do you need to cover, do you want colour night vision, and do you want AI alerts that ignore cars and animals? For most homes, a 4-camera 8MP ColorVu or Full-Colour kit is the sweet spot. Not sure? Use our CCTV Advisor — answer a few questions and it recommends a kit — or email us and we'll spec it with you.
Is your Hikvision, Dahua, HiLook and TP-Link VIGI stock genuine Australian stock?
Yes, 100%. Every Hikvision, Dahua, HiLook and TP-Link VIGI product we sell is a genuine Australian-market model sourced through Australian supply chains — never grey imports. That means factory-sealed units, Australian-region firmware that works with the official apps out of the box, and a full 3-year local warranty.
How long does delivery take?
Metro delivery usually takes 2–4 business days after dispatch, and regional areas may take longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
How much is shipping?
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
What warranty do you offer?
All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
What is your return policy?
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Do you offer installation?
We can connect you with licensed installers in Sydney and Melbourne. Installation typically starts from around $200 per camera depending on cable runs and site conditions. Email sales@smarket.com.au with your address and camera count for a quote.
Shop by Brand
Pick your preferred manufacturer ecosystem
Shop by Category
Cameras, recorders, kits and accessories
