Visitor communication & entrance systems
Intercom Accessories
Find dedicated Hikvision and Dahua intercom accessories, including mounting housings, rain shields, table brackets, modular controls, distributors and power supplies. Match the full model number and system generation: these parts are not universal camera or alarm accessories.
Intercom Accessories
Dahua VTM117 is an ADC12 surface mounting box for compatible video intercom door stations. Its 97 × 199 × 29 mm body supports a surface installation, with cable routing and fixing positions shown in the manufacturer installation drawing.
Dahua VTM22A 15-Degree Door Station Bracket
The Dahua VTM22A is a horizontally inclined bracket for the VTO1000J door station. Its 15-degree angle changes the station mounting direction, and up to two brackets can be combined.
Dahua VTM114 Intercom Flush Mount Box
The Dahua VTM114 provides a recessed mounting box for a compatible video door station. Its ADC12 structure has separate front and rear sections so the door station can be secured into the wall opening.
Dahua VTNS2003B-2-A 2-Wire Intercom Switch
The Dahua VTNS2003B-2-A is a two-wire intercom switch with Ethernet connectivity. It provides two RJ45 ports, two two-wire cascade ports and a two-wire device connection. The unit requires a compatible 48 VDC power supply and mounts on a guide rail.
Dahua VTM08R Rain Cover
The Dahua VTM08R is a silver aluminium-alloy rain cover designed for the VTO3221E door station. It uses surface mounting and measures 205.1 mm by 108.9 mm by 39.8 mm. Its IP65 protection requires silicone sealant during installation. Select the matching door station and suitable mounting and sealing materials for the entrance.
Dahua VTM115 Surface Mount Box
The Dahua VTM115 is a surface mounting box made from 2 mm AL5052 aluminium. It measures 129 mm by 95 mm by 28.5 mm and provides a mounting enclosure for a compatible door station. Plan the cable route, fixing points and sealing arrangement before installation, and confirm that the selected station matches the enclosure.
Dahua VTM116-01 Flush Mount Box
The Dahua VTM116-01 is an ADC12 mounting enclosure for a compatible flush-mounted door station. The front measures 138 mm by 240 mm by 35 mm; the rear and specified wall opening measure 120.8 mm by 222.7 mm by 33 mm. Confirm the station fit and wall construction before preparing the opening, and plan the cable routing and sealing for the entrance assembly.
Dahua VTM05R Surface-Mount Rain Cover - Silver
The Dahua VTM05R is a silver aluminium rain cover for a surface-mounted VTO2202F door-station installation. It measures 141.1 mm by 101.6 mm by 48.5 mm and weighs 309 g. The cover provides the mounting surround for the compatible outdoor station, which is selected separately. Silicone sealant is required for the stated IP65 protection; the rating should not be read as unconditional protection for an unsealed assembly. Confirm the exact station version and installation combination before ordering. This listing is for the rain-cover accessory, not a door station, indoor monitor or complete video intercom kit.
Intercom Accessories buying guide
Find the accessory your intercom needs
Mounting housings, frames and rain shields
Choose surface or flush mounting first, then match the housing to the door-station family and module count. The Hikvision DS-KD-ACW1 single-module housing is one example of a model-specific mount. A two- or three-module installation requires the corresponding supported arrangement. Rain shields and protective covers also need to match the device and installation format.
Modular controls and displays
Modular intercom keypads, card readers, nametag buttons, display modules and blank modules form part of a supported modular station. They do not operate as complete door stations by themselves. Verify compatibility with the main module, connecting hardware, housing and firmware before expanding a system.
Distributors and power supplies
Two-wire distributors and switches have specific roles in their system family. Verify the model, topology, permitted device count and power arrangement in the installation documentation. Intercom power supplies also need the correct voltage, output capacity and supported application; similar connector shapes are not proof of compatibility.
Indoor station table brackets
A table bracket lets a supported indoor station sit on a desk or counter. Match it to the exact monitor model. Do not assume that two monitors with the same screen size use the same fixing points.
Send the model numbers before ordering
If you are unsure, contact Smarket with the station and accessory model numbers, whether the system is IP or two-wire, and whether you need a surface, flush or desk installation. Check the product page for the supplied items.
Return to door stations, indoor monitors or complete kits to choose the main equipment. The intercom systems overview explains how these categories fit together.
Need help checking a system?
Use the exact product listings and manufacturer installation documents for compatibility. Contact Smarket with the model numbers you plan to connect. Check shipping information and the return policy before ordering.
Frequently asked questions
Are intercom accessories universal?
No. Match the manufacturer, exact station or monitor model, system generation and mounting format. Compatibility must be established for the particular accessory and device.
Does a rain shield make any intercom suitable for outdoor use?
No. The device must already meet the environmental and installation requirements for its location. A compatible rain shield is an accessory, not a replacement for the specified protection rating or installation method.
Can I use a two-wire distributor as a standard PoE network switch?
Do not assume so. A two-wire distributor belongs to a specific intercom system and wiring design. Use equipment expressly supported by the station, monitor and manufacturer installation instructions.
Do keypad and card-reader modules work on their own?
Modular intercom accessories generally require a compatible main station module and supported connections. They are not complete calling stations or standalone access systems unless the product documentation explicitly says otherwise.