All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Metro delivery usually takes 2–4 business days after dispatch, and regional areas may take longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
Dahua Alarm
These Dahua Blue Mifare Tags are the proximity tags (part code DHI-ARK30T-W2-IC) for the Dahua ARK30T-W2 AirShield wireless keypad. Each tag is a contactless Mifare card that a user simply taps on the keypad to arm or disarm the alarm — no PIN to remember, and you can give each person their own tag. They are passive RFID tags with no battery, and they only work with the ARK30T-W2 keypad, which is sold separately.
Key points
- Blue Mifare proximity tags for the Dahua ARK30T-W2 AirShield keypad
- Tap to arm and disarm — no PIN code needed
- Give each household member or staffer their own tag
- Contactless Mifare RFID; passive, no battery
- Easily enrolled and removed in the DMSS app
- Requires the ARK30T-W2 keypad (and an AirShield hub)
Dahua DHI-ARM7012-W2 Wireless WallSwitch
The Dahua DHI-ARM7012-W2 is a wireless WallSwitch for the Dahua AirShield alarm system. It lets you switch a mains appliance on or off remotely from the DMSS app, run it on a schedule or trigger it from an alarm event, and it monitors how much power that appliance is using. It handles loads up to 13 A at 100-240 VAC and links to your AirShield hub over an encrypted two-way wireless connection. An AirShield hub is required and sold separately.
Key points
- Remote on/off control of a 100-240 VAC appliance, up to 13 A
- Single relay output, switchable as normally-open or normally-closed
- Live energy monitoring: voltage, current and consumption in the DMSS app
- Overheat and overload protection built in
- Encrypted two-way wireless (AES128, frequency hopping) with jamming detection
- Range up to 1,200 m in open space to the hub
- Mains powered, indoor wall mount; requires a Dahua AirShield hub
The Dahua DHI-ARM7011-W2 is a wireless relay for the Dahua AirShield alarm system. It gives the system a switched, isolated dry contact (0-36 VDC, up to 5 A) that you can trigger from the app, on a schedule, in a scene, or automatically when an alarm event happens — handy for switching a light, a gate or garage trigger, or an extra warning device. It links to the hub over an encrypted two-way radio link and has overheat and overvoltage protection built in. An AirShield hub is required and sold separately.
Key points
- One isolated dry-contact relay output, 0-36 VDC, up to 5 A
- Trigger from the app, a schedule, a scene or an alarm event
- Encrypted two-way radio with AES128 and frequency hopping; range up to 800 m
- Overheat and overvoltage protection; one tamper input
- Powered from 7-24 V DC; compact wall mount
- Requires a Dahua AirShield hub
Dahua DHI-ARM320-W2 Wireless Input Expander
The Dahua DHI-ARM320-W2 is a wireless input expander for the Dahua AirShield alarm system. It lets you connect an existing third-party wired detector — a PIR, reed, smoke or panic device — and bring it into your wireless alarm, so when that detector triggers, the expander reports it to the hub over the air. It can even supply low-voltage power to the connected detector, and it runs for years on its own batteries. An AirShield hub is required and sold separately.
Key points
- Connects a third-party wired detector to the Dahua AirShield wireless system
- One alarm input plus a second input for the detector's tamper port
- Six alarm types selectable in the app: intrusion, medical, fire, emergency, gas, tamper
- Auxiliary 3.3 V output (up to 10 mA) to power the connected detector
- Encrypted two-way wireless (AES128, frequency hopping), up to 1,300 m
- Triaxial accelerometer for a device-moved alarm; tamper protection
- 4 x AA batteries for around 3 years of life; indoor; requires a Dahua AirShield hub
Dahua DHI-ARM310-W2 Wireless Input Expander
The Dahua DHI-ARM310-W2 is a wireless input expander for the Dahua AirShield alarm system. It takes a single wired detector — one that only comes in a hard-wired form, or an existing wired sensor you want to keep — and reports it to the hub wirelessly, so you can fold a wired device into an otherwise wireless system without running cable back to a panel. It links to the hub over an encrypted two-way RF connection and runs on a battery. An AirShield hub is required and sold separately.
Key points
- Converts one wired (NO/NC) detector input into an AirShield wireless zone
- Reports six alarm types: intrusion, medical, fire, emergency, gas and tamper
- Encrypted two-way RF link with frequency hopping; signal-strength check
- Ambient temperature monitoring and low-battery alarm
- 4 x AA batteries for around 3 years (NO input) or 2 years (NC/pulse)
- Indoor, bracket mount; requires a Dahua AirShield hub
The Dahua DHI-ARK30T-W2 is a wireless keypad for the Dahua AirShield alarm system. It lets people arm and disarm by entering a PIN or tapping an IC card by the door, with support for up to 32 users so you can give everyone their own code. It is fully wireless and links to your AirShield hub over an encrypted 868 MHz two-way connection, so there is no cabling to run. An AirShield hub is required and sold separately.
Key points
- Arm and disarm by PIN code or contactless IC card
- Supports up to 32 individual users
- Emergency alarm functions (panic, fire and medical) from the keypad
- 868 MHz two-way radio with AES128 encryption and frequency hopping
- Range up to 1,600 m in open space to the hub
- Four indicator lights for communication, arm/disarm, fault and alarm
- 4 x AA batteries with around 3 years of life; tamper alarm; indoor wall mount
Dahua DHI-ARD912-W2(D) Wireless Water Leak Detector
The Dahua DHI-ARD912-W2(D) is a wireless water-leak detector for the Dahua AirShield alarm system. Place it on the floor by a washing machine, dishwasher, hot-water unit or under a sink and it raises an alarm the moment water reaches its probe, so you catch a leak before it does real damage. This (D) version has an adjustable-height probe, so you can set how deep the water has to pool before it alarms, and the casing is IPX5 water-resistant. It links to your AirShield hub over an encrypted two-way RF connection. An AirShield hub is required and sold separately.
Key points
- Alarms as soon as water reaches the probe
- Adjustable-height probe sets the trigger depth and sensitivity
- IPX5 water-resistant casing; no wiring, easy to place
- Encrypted two-way RF link with frequency hopping and jamming detection
- Ambient temperature display and overheat alarm
- CR123A battery, around 3 years; indoor; requires an AirShield hub
Dahua DHI-ARD912-W2 Wireless Water Leak Detector
The Dahua DHI-ARD912-W2 is a wireless water-leak detector for the Dahua AirShield alarm system. Place it on the floor by a washing machine, dishwasher, hot-water unit or under a sink and it raises an alarm the moment water reaches its sensor, so you catch a leak before it does real damage. Sensitivity is adjustable to suit the spot, the casing is IPX5 water-resistant, and it links to your AirShield hub over an encrypted 868 MHz two-way connection. An AirShield hub is required and sold separately.
Key points
- Alarms as soon as water reaches the sensor
- Adjustable sensitivity to suit the location
- IPX5 water-resistant casing; no wiring, easy to place
- 868 MHz two-way radio with AES128 encryption and frequency hopping
- Range up to 1,200 m in open space to the hub
- Temperature display and overheat alarm; CR123A battery, around 3 years
Before you buy
What customers ask most before ordering from this range — and how we deliver.
How many cameras do I need?
Walk around your property and list every approach: front door, driveway, side gates, back yard, garage. Each one is a camera. A typical house needs 4; a corner block or larger property needs 6–8. Buy an NVR with spare channels — an 8-channel NVR with 4 cameras lets you add more later without replacing anything.
Should I choose 6MP or 8MP (4K)?
8MP (3840 × 2160) gives you noticeably more detail when you zoom into a face or number plate, and with H.265+ compression the extra storage cost is small. 6MP (3072 × 2048) is a good value choice for close-range areas like a front door or side passage. If the camera covers a driveway, street frontage or anything more than about 10 metres away, go 8MP.
How long does delivery take?
Metro delivery usually takes 2–4 business days after dispatch, and regional areas may take longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
How much is shipping?
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
What warranty do you offer?
All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
What is your return policy?
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Do you offer installation?
We can connect you with licensed installers in Sydney and Melbourne. Installation typically starts from around $200 per camera depending on cable runs and site conditions. Email sales@smarket.com.au with your address and camera count for a quote.
Security Cameras
Add cameras alongside your alarm system
