All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Metro delivery usually takes 2–4 business days after dispatch, and regional areas may take longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
Bosch Solution 6000
Bosch 6000 Series Alarm Kit with Smart Keypad, 3 x Bosch Gen2 PIRS and Accessories
The Bosch Solution 6000 alarm kit with the CP736B smart keypad and three PIRs is a professional-grade wired alarm for larger Australian homes and small to medium businesses. It pairs the high-end Solution 6000 panel with a colour graphic keypad and integrated smart-card reader, three Blue Line Gen2 PIR detectors and both internal and external sirens, so it is ready to protect the main areas after a licensed install.
What's in the box
- Bosch Solution 6000 control panel (16 zones on board, expandable to 144 wired or wireless)
- Bosch CP736B 3.5-inch colour graphic keypad with integrated smart-card reader (not a touchscreen)
- 3x Blue Line Gen2 PIR motion detectors (BPR2-W12, 12m)
- 18V plug-pack transformer and 12V 7Ah backup battery
- Internal 120dB piezo siren and external siren with strobe
- Metal enclosure with tamper switch, 8x 3k3 + 8x 6k8 resistors and a manual
- No IP module; add the CM751B Conettix IP module for the free Bosch RSC+ app
Bosch CP736B Solution 6000 Colour Smart Card Keypad
The Bosch CP736B is a 3.5" colour graphic keypad for Solution 6000 owners who want card-based arming and disarming: a built-in 40bit MiFare smart card reader, alphanumeric prompting on a backlit colour screen, and lock and egress terminals for a door at the keypad position.
What you get
- 1 × CP736B colour keypad in white, with a manual and a mounting back plate
You'll also need
- A Solution 6000 or Solution 6000-IP panel, such as the CC610P panel PCB
- Cable for the panel's RS485 LAN, and MiFare cards or tokens if users will arm and disarm by card
- For a door lock: a relay with a protection diode and a separate lock power supply, since the keypad's lock output does not drive a lock directly
Bosch CC610GWP Solution 6000 Panel PCB + CP736B Keypad
The Bosch CC610GWP combines the Solution 6000 CC610P control panel PCB with the CP736B smart proximity keypad for homeowners and businesses that need an Australian-designed and manufactured intrusion and access control system with 16 on-board zones expandable to 144.
What you get
- 1 × CC610P Solution 6000 control panel PCB — 16 on-board zones, partitionable to 8 areas, with 5 on-board outputs
- 1 × CP736B smart proximity keypad — alphanumeric LCD, text-driven menu and colour coded, illuminated keys
You'll also need
- A compatible enclosure such as the MW720B or MW730B
- The specified primary power source and a 12 VDC, 7.2AH sealed rechargeable battery
- Detectors, a siren and strobe, and a qualified and licensed security installer to wire, program and commission the system
Bosch CC610GWF-2 144-Zone Panel + CP737B Wi-Fi Keypad
The Bosch CC610GWF-2 pairs the Solution 6000 control panel PCB with a colour Wi-Fi keypad for homes and small businesses seeking MyAlarm app compatibility.
What you get
- CC610PB Solution 6000 control panel PCB — 16 on-board zones, 8 areas, 5 on-board outputs, 256 users and access control for up to 16 doors
- CP737B graphic keypad — 3.5" colour display, 40bit MiFare smart card reader and 802.11 b/g/n Wi-Fi built in
- Keypad manual and mounting back plate
You'll also need
- An MW720B or MW730B enclosure selected with your licensed security installer
- A 16-18V A.C 50-60Hz - 24VA External Power Adaptor or 220-240V A.C. to 18V A.C 50-60Hz - 24VA Internal Transformer, plus a 12 VDC, 7.2AH sealed rechargeable back-up battery
- Detectors, alarm outputs and a MyAlarm subscription if you want app control
- A qualified and licensed security installer to fit and commission the system
Bosch CM796B Wiegand to RS485 LAN Interface Module
The Bosch CM796B is the interface module for a Solution 6000 or Solution 144 site that wants to use a third-party proximity reader: it takes a 26bit to 40bit Wiegand reader such as the PR100B and puts it on the panel's RS485 LAN as a reader address, with LED and buzzer control for the reader.
What you get
- 1 × CM796B module PCB with mounting spacer pack, installer reference guide and 2 shunts
You'll also need
- A Solution 6000 panel on version 2.12 or later, such as the CC610P panel PCB, or a Solution 144 on version 2.08 or later
- A PR100B or other suitable 26bit to 40bit Wiegand reader with matching cards or tokens
- A power supply for the reader, such as the CM720B, wired to the module's separately fused reader power terminals
Bosch CM705PB Universal Zone & Output Expander Solution 6000
The Bosch CM705PB is the universal expander PCB for the Solution 6000: one LAN module that adds up to 16 zone inputs, 4 monitored 500mA outputs and power terminals with a battery charger.
What you get
- Bosch CM705PB universal expander module — PCB only
You'll also need
- A compatible Solution 6000 control panel
- A 16-18V AC 50-60Hz – 24VA External Power Adaptor or internal transformer, a 12V DC, 7.2AH battery for the module's own supply and a suitable enclosure
- Detectors for the new zones and any devices required for the programmable outputs
Bosch CM255B Panel Default Unlock Key for Solution 6000
The Bosch CM255B is the way into a Solution panel whose installer PIN nobody knows: a single-use plug-in key that resets the installer PIN and RAS security PIN on a Solution 6000, so the panel is taken over on site instead of being unwired and returned for defaulting.
What you get
- 1 × CM255B factory default module, blue, with red and green status indicators, for one use only
You'll also need
- Access to the panel board and its 10-pin connector marked Serial Port or Direct Link Port, such as on the CC610P
- A new key for every panel defaulted, because a used key cannot be used again
Bosch CM751B Conettix IP Ethernet Module for Solution 6000
The Bosch CM751B is the plug-on Ethernet module for a Solution 6000 owner who wants the panel on the network instead of a phone line: monitored reporting in Conettix or CSV-IP format with 128 bit AES encryption, remote programming over IP, and the wired path for the MyAlarm app.
What you get
- 1 × CM751B Conettix IP Ethernet module with three PCB standoffs and the HW750 riser kit
You'll also need
- A Solution 6000 control panel, sold here as the CC610P panel PCB or in the CC610GWP panel and keypad kit
- A network cable from the panel cabinet to the router or switch
- A MyAlarm subscription if app control is wanted; it is a paid service that Bosch does not run
Before you buy
What customers ask most before ordering from this range — and how we deliver.
Which kit is right for me?
Start with three questions: how many areas do you need to cover, do you want colour night vision, and do you want AI alerts that ignore cars and animals? For most homes, a 4-camera 8MP ColorVu or Full-Colour kit is the sweet spot. Not sure? Use our CCTV Advisor — answer a few questions and it recommends a kit — or email us and we'll spec it with you.
Is your Hikvision, Dahua, HiLook and TP-Link VIGI stock genuine Australian stock?
Yes, 100%. Every Hikvision, Dahua, HiLook and TP-Link VIGI product we sell is a genuine Australian-market model sourced through Australian supply chains — never grey imports. That means factory-sealed units, Australian-region firmware that works with the official apps out of the box, and a full 3-year local warranty.
How long does delivery take?
Metro delivery usually takes 2–4 business days after dispatch, and regional areas may take longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
How much is shipping?
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
What warranty do you offer?
All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
What is your return policy?
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Do you offer installation?
We can connect you with licensed installers in Sydney and Melbourne. Installation typically starts from around $200 per camera depending on cable runs and site conditions. Email sales@smarket.com.au with your address and camera count for a quote.
Shop by Brand
Pick your preferred manufacturer ecosystem
Shop by Category
Cameras, recorders, kits and accessories
