All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Order before 2pm (Sydney time) on a business day and in-stock items are dispatched the same day. Most orders arrive within 1–4 business days Australia-wide; remote and regional areas can take a little longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
Bosch RADION Wireless
Bosch RFUN RADION Wireless Universal Transmitter with Input
The Bosch RFUN is the RADION universal transmitter: a wireless door contact with a loop input beside it, so an existing wired detector, a roller-door switch or a panic button can report to the alarm panel without a cable run.
What you get
- 1 × RFUN wireless universal transmitter, the version for Europe, Africa and Australia
You'll also need
- A RADION receiver on the alarm panel that lists the RFUN among the devices it accepts
- The magnet assembly that pairs with it, fitted to the moving part of the door or window
- A CR123A lithium battery when the time comes to replace it
- Short cable of 0.65 mm to 1.5 mm between the transmitter and the external device, if the loop input is used
Bosch RFDW-RM RADION Wireless Recessed Door Contact
The Bosch RFDW-RM is the RADION contact that nobody sees: a wireless magnetic reed switch in a slim cylinder that drills into the door or window frame, leaving the opening protected and the hardware hidden.
What you get
- 1 × RFDW-RM recessed contact and its magnet assembly
- 1 × AAA lithium battery, 1 × hardware pack and 1 × installation guide
You'll also need
Bosch RFSM2-A RADION Wireless Photoelectric Smoke Detector
The Bosch RFSM2-A is a RADION wireless smoke detector for homes that want fire detection on their Bosch alarm panel without running cable: photoelectric smoke sensing plus fixed and fast-rise heat sensing, its own 85 dBA sounder, and supervised reporting to the panel over 433.42 MHz radio.
What you get
- 1 × RFSM2-A detector with the radio module and two CR123A batteries installed
- 2 mounting screws and 2 wall anchors
You'll also need
- A B810 wireless SDI2 bus interface at the panel
- A compatible panel. Bosch lists the G Series B9512G and B8512G, the B Series B6512, B5512, B4512 and B3512, and the GV4 Series D9412GV4 and D7412GV4 at v2.00 or higher; on a Solution 6000 support was added in firmware V2.53.19
- An indoor, dry ceiling or wall position on a flat rigid surface
Bosch B810 RADION Wireless Receiver for Solution 3000/4000
The Bosch B810 is a 433.42 MHz RADION wireless receiver that connects compatible detectors, contacts, keyfobs, panic buttons and repeaters to a supported Bosch control panel over the SDI2 bus, with one receiver used per system.
What you get
- B810 wireless receiver, hardware pack and installation guide
You'll also need
- A compatible Solution panel: the ICP-SOL3-P or ICP-SOL4-P. On the Solution 4000, a B810 and a WE800EV2 cannot be fitted together
- RADION devices to receive: the RFDL-11 TriTech and RFPR-12 PIR detectors, RFDW-SM and RFDW-RM door and window contacts, the RFUN universal transmitter, RFKF-FBS keyfob and RFGB glass break
Bosch RFRC-STR2 RADION Wireless Receiver for Solution Panels
The Bosch RFRC-STR2 is the RADION receiver ST, the wireless receiver that puts RADION and DSRF devices on a Streamline Bus Solution panel: motion detectors, door contacts, keyfobs, panic buttons and repeaters on 433.42 MHz, wired to the panel on three terminals, and the replacement for the older RF3212E receiver.
What you get
- 1 × RFRC-STR2 wireless receiver in a white plastic sliding self-locking enclosure
- 1 × hardware pack, 1 × installation guide and 1 × reference guide
You'll also need
- A listed panel: Solution 6000 or 144, such as the CC610P board, Solution 64, 16Plus, 16i, Ultima 880 or 880, or any panel that previously used an RF3212E
- A three-core cable run from the panel, 0.65 mm (22 AWG) to 1.3 mm (16 AWG), no longer than 300 m
- Wireless devices to learn in, such as the RFDL-11 TriTech, the RFPR-12 PIR, the RFDW-SM contact or the RFKF-FBS keyfob
Bosch RFPR-12 RADION Wireless Pet-Friendly PIR Detector, 12 m
The Bosch RFPR-12 is the RADION wireless motion detector for a room the dog still uses: a 12 m x 12 m pattern, pet immunity to a 13 kg dog, and a lithium battery that runs for years, so a room gets covered without a cable.
What you get
- 1 × RFPR-12 RADION PIR detector in a white plastic housing, the version for Europe, Africa and Australia
You'll also need
Bosch RFDL-11 RADION Wireless TriTech Detector 11 m Pet
The Bosch RFDL-11 is a RADION wireless TriTech motion detector for homes and offices that want a Bosch alarm without cabling every room: passive infrared and microwave Doppler radar in one battery-powered unit, pet immune to a 45 kg dog, with 11 m x 11 m coverage.
What you get
- 1 × RFDL-11 RADION TriTech wireless motion detector
You'll also need
- A RADION receiver at the panel, such as the B810 wireless SDI2 bus interface or the RFRC-STR2 receiver ST
- Four AA alkaline batteries
- A wall or corner position between 2 m and 2.4 m high; the B338 universal bracket is the ceiling option
- An installer session at the panel to learn the detector in as an RF zone
Bosch RFDW-SM RADION Wireless Surface Mount Door Contact
The Bosch RFDW-SM is the RADION surface-mount contact: a wireless magnetic reed switch that tells the panel a door or window has opened, with no cable to run and a battery that lasts years.
What you get
- 1 × RFDW-SM wireless surface-mount contact, the version for Europe, Africa and Australia
You'll also need
Before you buy
What customers ask most before ordering from this range — and how we deliver.
Which kit is right for me?
Start with three questions: how many areas do you need to cover, do you want colour night vision, and do you want AI alerts that ignore cars and animals? For most homes, a 4-camera 8MP ColorVu or Full-Colour kit is the sweet spot. Not sure? Use our CCTV Advisor — answer a few questions and it recommends a kit — or email us and we'll spec it with you.
Is your Hikvision, Dahua, HiLook and TP-Link VIGI stock genuine Australian stock?
Yes, 100%. Every Hikvision, Dahua, HiLook and TP-Link VIGI product we sell is a genuine Australian-market model sourced through Australian supply chains — never grey imports. That means factory-sealed units, Australian-region firmware that works with the official apps out of the box, and a full 3-year local warranty.
How long does delivery take?
Order before 2pm (Sydney time) on a business day and in-stock items are dispatched the same day. Most orders arrive within 1–4 business days Australia-wide; remote and regional areas can take a little longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
How much is shipping?
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
What warranty do you offer?
All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
What is your return policy?
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Do you offer installation?
We can connect you with licensed installers in Sydney and Melbourne. Installation typically starts from around $200 per camera depending on cable runs and site conditions. Email sales@smarket.com.au with your address and camera count for a quote.
Shop by Brand
Pick your preferred manufacturer ecosystem
Shop by Category
Cameras, recorders, kits and accessories
