All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Order before 2pm (Sydney time) on a business day and in-stock items are dispatched the same day. Most orders arrive within 1–4 business days Australia-wide; remote and regional areas can take a little longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
Door & Window Contacts
Universal Roller Door Reed Switch RSRDM
The RSRDM Universal Roller Door Reed Switch is a heavy-duty wired magnetic contact for monitoring roller shutters, garage doors and large commercial doors. It is a normally closed (NC) switch with a wide operating gap and armoured leads, and wires into a zone on any standard hardwired alarm panel.
Key points
- Heavy-duty wired reed switch for roller shutters and garage doors
- Normally closed (NC) output for any standard hardwired alarm zone
- Wide operating gap (around 50-60 mm) to suit large moving doors
- Metal alloy housing with a nickel-plated neodymium magnet
- 480 mm stainless-steel armoured leads (22 AWG) to protect the wiring
- Wired contact (not a wireless device); suits commercial and industrial doors
Bosch RFUN RADION Wireless Universal Transmitter with Input
The Bosch RFUN is the RADION universal transmitter: a wireless door contact with a loop input beside it, so an existing wired detector, a roller-door switch or a panic button can report to the alarm panel without a cable run.
What you get
- 1 × RFUN wireless universal transmitter, the version for Europe, Africa and Australia
You'll also need
- A RADION receiver on the alarm panel that lists the RFUN among the devices it accepts
- The magnet assembly that pairs with it, fitted to the moving part of the door or window
- A CR123A lithium battery when the time comes to replace it
- Short cable of 0.65 mm to 1.5 mm between the transmitter and the external device, if the loop input is used
Bosch RF3405E Wireless Inertia Transmitter with Reed Switch
The Bosch RF3405E puts three kinds of sensing in one wireless housing: an inertia sensor that feels an attack on the frame, a magnetic reed switch that sees the door or window open, and a supervised input for an external dry contact, reporting on 433.42 MHz. The transmitter is set to monitor either the inertia sensor or the external loop, not both at once.
What you get
- 1 × RF3405E wireless inertia transmitter
You'll also need
- A compatible wireless receiver on the alarm panel, such as the RFRC-STR2, which lists this transmitter among its DSRF devices
- The magnet assembly that pairs with it, fitted to the moving part of the door or window
- A 3 VDC lithium battery when the time comes to replace it: a Duracell DL123A, Energizer EL123AP or Panasonic CR123A
- End-of-line resistors if the external input will supervise a dry contact device
Bosch RFDW-RM RADION Wireless Recessed Door Contact
The Bosch RFDW-RM is the RADION contact that nobody sees: a wireless magnetic reed switch in a slim cylinder that drills into the door or window frame, leaving the opening protected and the hardware hidden.
What you get
- 1 × RFDW-RM recessed contact and its magnet assembly
- 1 × AAA lithium battery, 1 × hardware pack and 1 × installation guide
You'll also need
Bosch ISC-SK10 Shock Sensor, 3-Axis Vibration Detection
The Bosch ISC-SK10 is a shock sensor for the attack that happens before anything opens: hammering, drilling or sawing at a safe, a strongroom door or a shopfront window. Intelligent 3-axis vibration detection reads the attack, and a normally-closed relay reports it to the alarm panel.
What you get
- 1 × ISC-SK10 shock sensor
- 1 × hardware pack and 1 × installation guide
You'll also need
- An alarm panel with a spare zone that accepts a normally-closed relay and tamper loop, and supplies 9 to 15 VDC. The ICP-SOL3-P and CC610P are the panels sold here; check the zone input against those figures
- A cable run from the panel carrying its 9 to 15 VDC supply, the alarm relay and the tamper, plus the end-of-line resistors the panel requires
- A flat indoor surface to mount it on: metal, glass, concrete or wood
Hikvision DS-PDTPH-E-WB Ax Pro Wireless Temperature and Humidity Sensor
The Hikvision DS-PDTPH-E-WB is a wireless temperature and humidity sensor for AX PRO alarm systems. It keeps watch on indoor conditions and sends an alert through Hik-Connect when temperature or humidity drifts outside the range you set, so problems in a server room, cellar, cool room or store room are caught early.
At a glance
- Wireless temperature and humidity monitoring with threshold alerts via Hik-Connect
- 2.7-inch on-screen display shows live readings
- -10 to 55°C standalone, or -35 to 99°C with the included external probe
- Tri-X two-way wireless, up to 800m open-air, 433MHz, AES-128 with frequency hopping
- Two AAA batteries, up to 2 years; front and rear tamper; indoor wall mount
Big Gap Surface Mount Reed Switch, White
The CSD-2001 is a wired surface-mount reed switch with an extended 50 mm operating gap, made for doors and windows where alignment can drift or the gap is wide. It is a normally-closed (NC) SPST contact with an epoxy-sealed reed in a white housing, ideal for roller doors, garage doors and large openings that a standard reed cannot reliably cover. It connects to any hardwired alarm zone.
Key points
- Wired surface-mount reed switch, white housing
- Extended 50 mm operating gap for wide or drifting doors
- Normally-closed (NC) SPST contact for any hardwired alarm zone
- Epoxy-sealed reed for durability and moisture resistance
- Rated 100 V DC, 500 mA, 8 W
- Compact 90 x 13 x 18 mm body
Hikvision DS-PDMCX-E-WB Ax Pro Wireless Outdoor Reed Switch, Large, IP66 External Magnet Detector
The Hikvision DS-PDMCX-E-WB is a large wireless outdoor magnetic contact (reed switch) for AX PRO alarm systems. With an IP66 housing, a big external magnet and a generous 76mm gap, it brings open/close detection to gates, roller doors, sheds and other outdoor openings where an indoor contact will not cope.
At a glance
- Wireless outdoor open/close detection for gates, roller doors and sheds
- IP66 weatherproof, UV-stable housing; -20 to 60°C operation
- Large external magnet with up to 76mm detection gap for misaligned or wide openings
- Tri-X two-way wireless to an AX PRO hub, up to 1km open-air, AES-128 with frequency hopping
- One CR123A battery, up to 5 years; front and rear tamper; alarm input (NC / NO / impulse)
Before you buy
What customers ask most before ordering from this range — and how we deliver.
Which kit is right for me?
Start with three questions: how many areas do you need to cover, do you want colour night vision, and do you want AI alerts that ignore cars and animals? For most homes, a 4-camera 8MP ColorVu or Full-Colour kit is the sweet spot. Not sure? Use our CCTV Advisor — answer a few questions and it recommends a kit — or email us and we'll spec it with you.
Is your Hikvision, Dahua, HiLook and TP-Link VIGI stock genuine Australian stock?
Yes, 100%. Every Hikvision, Dahua, HiLook and TP-Link VIGI product we sell is a genuine Australian-market model sourced through Australian supply chains — never grey imports. That means factory-sealed units, Australian-region firmware that works with the official apps out of the box, and a full 3-year local warranty.
How long does delivery take?
Order before 2pm (Sydney time) on a business day and in-stock items are dispatched the same day. Most orders arrive within 1–4 business days Australia-wide; remote and regional areas can take a little longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
How much is shipping?
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
What warranty do you offer?
All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
What is your return policy?
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Do you offer installation?
We can connect you with licensed installers in Sydney and Melbourne. Installation typically starts from around $200 per camera depending on cable runs and site conditions. Email sales@smarket.com.au with your address and camera count for a quote.
Alarms by Brand
Compare alarm systems across the range
Security Cameras
Add cameras alongside your alarm system
