All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Metro delivery usually takes 2–4 business days after dispatch, and regional areas may take longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
CCTV Junction Boxes
Hikvision DS-1280ZJ-SD11 Junction Box to suit 4 Inch PTZ Cameras
The Hikvision DS-1280ZJ-SD11 is an aluminium-alloy junction box that mounts a 4-inch mini PTZ camera and hides the cabling behind it. It suits Hikvision DS-2DE4A series mini PTZ domes, supports up to 5 kg, and offers both side and bottom cable entry so you can run conduit neatly. The weatherproof design suits indoor and outdoor installs when the supplied rubber seal is fitted.
Key points
- Junction box for Hikvision 4-inch mini PTZ cameras (DS-2DE4A series)
- Aluminium alloy with sprayed Hikvision White finish
- Maximum load capacity 5 kg (11 lb)
- Side and bottom cable entry for tidy conduit routing
- Weatherproof design; fit the rubber seal for outdoor use
- Diameter 157.7 mm, depth 39.7 mm; weight 450 g
Hikvision DS-1260ZJ Junction Box White or Black
The Hikvision DS-1260ZJ (factory code CB130) is a compact aluminium-alloy junction box for Hikvision bullet cameras in the 2CD26x2 and 2Tx5 families. It mounts behind the bullet base to conceal and weatherproof the cable entry.
Key points
- Suits Hikvision 2CD26x2 / 2Tx5 bullet cameras (for example DS-2CD2T86G2, DS-2CD2T66G2)
- Aluminium alloy with surface spray treatment
- Ø88.5 mm × 36 mm, approx. 248 g
- Maximum load 4.5 kg
- Available in white or black
Uniview TR-JB07-D-IN-V2-SE Junction Box with Rear Cable Outlet
The Uniview TR-JB07-D-IN-V2-SE is an aluminium alloy junction box for bullet and box cameras, with an extra outlet at the back so the cable can leave through the wall instead of running down it.
What you get
- 1 × TR-JB07-D-IN-V2-SE junction box, white aluminium alloy, with NPS 3/4" thread
You'll also need
- A camera from the series it is listed for, and the fixings suited to the surface
Hikvision DS-1280ZJ-XS Junction Box
The Hikvision DS-1280ZJ-XS is a compact aluminium-alloy junction box for smaller Hikvision dome and bullet cameras. It seats behind the camera to give a sealed, tidy space for the network cable and connector, with a cable hole in the bracket for a neat entry.
Key points
- Compact junction box for smaller Hikvision dome and bullet cameras
- Aluminium alloy with surface spray treatment
- Φ100 mm × 43.2 mm × 129 mm, approx. 320 g
- Maximum load 4.5 kg
- Indoor and outdoor use (seal the cable entry outdoors)
Hikvision DS-1473ZJ-135B Wall Mount with Junction Box
The Hikvision DS-1473ZJ-135B is a white aluminium-alloy wall mount with a junction box for a compatible camera installation. The enclosure provides a connection area within the mounting assembly. Match the camera base and allow clearance around the junction box. Plan cable entry and sealing for the chosen location.
Hikvision DS-1280ZJ-TR13 Camera Junction Box
The Hikvision DS-1280ZJ-TR13 is a white aluminium-alloy junction box for a compatible camera assembly. It measures 110 mm in diameter by 144.3 mm by 48 mm and weighs approximately 187 g. Match the camera base and cable entry to the TR13 enclosure. Plan the cable connection and any sealing required at the site.
Hikvision DS-1280ZJ-DM18 Dome Camera Junction Box
The Hikvision DS-1280ZJ-DM18 is a white aluminium-alloy junction box for a compatible dome camera. Its circular body has a diameter of 111 mm and a weight of 150 g. Use the exact camera mounting pattern to check fit. Plan the cable entry and sealing for the installation location.
Hikvision DS-1280ZJ-S Junction Box with Gland, suits HIK-2CD26, 2CD2T, 2CD4A, 2CD22, 2CD42, E16D5
The Hikvision DS-1280ZJ-S is an aluminium-alloy junction box with a built-in cable gland that mounts behind a Hikvision camera to hide and weatherproof the cable entry. It suits a broad range of Hikvision turret, bullet and dome cameras, including the 2CD26, 2CD2T, 2CD4A, 2CD22 and 2CD42 families.
Key points
- Suits Hikvision 2CD26 / 2CD2T / 2CD4A / 2CD22 / 2CD42 / E16D5 / 2CE1D series cameras
- Built-in cable gland for a sealed cable entry
- Aluminium alloy with a sprayed Hikvision-white finish
- 137 mm × 54 mm × 171.5 mm, approx. 660 g
- Suitable for indoor and outdoor mounting
Before you buy
What customers ask most before ordering from this range — and how we deliver.
Which kit is right for me?
Start with three questions: how many areas do you need to cover, do you want colour night vision, and do you want AI alerts that ignore cars and animals? For most homes, a 4-camera 8MP ColorVu or Full-Colour kit is the sweet spot. Not sure? Use our CCTV Advisor — answer a few questions and it recommends a kit — or email us and we'll spec it with you.
Is your Hikvision, Dahua, HiLook and TP-Link VIGI stock genuine Australian stock?
Yes, 100%. Every Hikvision, Dahua, HiLook and TP-Link VIGI product we sell is a genuine Australian-market model sourced through Australian supply chains — never grey imports. That means factory-sealed units, Australian-region firmware that works with the official apps out of the box, and a full 3-year local warranty.
How long does delivery take?
Metro delivery usually takes 2–4 business days after dispatch, and regional areas may take longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
How much is shipping?
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
What warranty do you offer?
All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
What is your return policy?
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Do you offer installation?
We can connect you with licensed installers in Sydney and Melbourne. Installation typically starts from around $200 per camera depending on cable runs and site conditions. Email sales@smarket.com.au with your address and camera count for a quote.
Shop by Brand
Pick your preferred manufacturer ecosystem
Shop by Category
Cameras, recorders, kits and accessories
