Hikvision DS-1280ZJ-XS Junction Box
Skip to product information
1
/
of
1
Vendor:
Hikvision
Hikvision DS-1280ZJ-XS Junction Box
SKU: DS-1280ZJ-XS
Description
The Hikvision DS-1280ZJ-XS is a compact aluminium-alloy junction box for smaller Hikvision dome and bullet cameras. It seats behind the camera to give a sealed, tidy space for the network cable and connector, with a cable hole in the bracket for a neat entry.
Key points
- Compact junction box for smaller Hikvision dome and bullet cameras
- Aluminium alloy with surface spray treatment
- Φ100 mm × 43.2 mm × 129 mm, approx. 320 g
- Maximum load 4.5 kg
- Indoor and outdoor use (seal the cable entry outdoors)
Regular price
$21.35 AUD
Sale price
$21.35 AUD
Regular price
$22.00 AUD
Sale
2.95%
$0.65 AUD
(2.95%)
Business or bulk buyer? Apply for trade pricing →
Found a lower price? We’ll match it →
Delivery, warranty & returns · ships same day before 2pm
- Same-day dispatch on in-stock orders placed before 2pm, Sydney time.
- 1–4 business days Australia-wide. Free standard shipping over $300, flat $25 under.
- 3-year warranty on cameras and recorders, back-to-base, plus your Australian Consumer Law rights.
- 30-day returns on unopened items. Faulty on arrival? We cover return shipping.
- Genuine Australian stock. Never grey imports. Prices include GST.
In stock
Hikvision DS-1280ZJ-XS Junction Box
1
/
of
1
All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Order before 2pm (Sydney time) on a business day and in-stock items are dispatched the same day. Most orders arrive within 1–4 business days Australia-wide; remote and regional areas can take a little longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
§ 01Overview
What the DS-1280ZJ-XS is
The Hikvision DS-1280ZJ-XS is a compact camera junction box for the company's smaller dome and bullet cameras. It mounts flat behind the camera and creates a protected cavity for the network cable, connector and any pigtail, so the join is hidden and shielded rather than left exposed on the wall.
It is aluminium alloy with a surface-sprayed finish and a cable hole in the bracket for a clean entry. It measures Φ100 mm by 43.2 mm by 129 mm, weighs about 320 g, and is rated to a 4.5 kg maximum load, which is well above the weight of any compatible compact camera.
Hikvision sizes its junction boxes to camera families rather than single models, so always confirm the mounting accessory listed on your camera's datasheet before ordering.
§ 02Engineering
DS-1280ZJ-XS specifications
- Genuine Hikvision DS-1280ZJ-XS compact camera junction box
- Suits smaller Hikvision dome and bullet cameras
- Aluminium alloy with surface spray treatment for corrosion resistance
- Cable hole in the bracket for a clean, sealed entry
- Φ100 mm x 43.2 mm x 129 mm, approx. 320 g
- Maximum load 4.5 kg; suitable for indoor and outdoor mounting
- Suits smaller Hikvision dome and bullet cameras
- Aluminium alloy with surface spray treatment for corrosion resistance
- Cable hole in the bracket for a clean, sealed entry
- Φ100 mm x 43.2 mm x 129 mm, approx. 320 g
- Maximum load 4.5 kg; suitable for indoor and outdoor mounting
§ 03Full datasheet
Detailed specifications
General & Environment
| Feature | Detail |
|---|---|
| Description | Junction Box for Dome(Bullet) Camera |
| Appearance | Hikvision White |
| Material | Aluminum Alloy |
| Dimension | Φ100 x 43.2 x 129mm |
| Weight | 320g |
| Max Load Capacity | 4.5KG |
| Features | Aluminum alloy material with surface spray treatment; Cable hole on bracket makes the feature better |
| General & Environment — Description | Junction Box for Dome(Bullet) Camera |
|---|---|
| General & Environment — Appearance | Hikvision White |
| General & Environment — Material | Aluminum Alloy |
| General & Environment — Dimension | Φ100 x 43.2 x 129mm |
| General & Environment — Weight | 320g |
| General & Environment — Max Load Capacity | 4.5KG |
| General & Environment — Features | Aluminum alloy material with surface spray treatment; Cable hole on bracket makes the feature better |
§ 04Why choose this
Built for the way you actually use the DS-1280ZJ-XS
Genuine Hikvision part
As the factory DS-1280ZJ-XS, the base and screw pattern match the camera bodies it is designed for, for a flush, gap-free fit.
Weatherproofs the join
The aluminium cavity keeps the cable and connector sealed rather than exposed, which is where outdoor cameras most often fail.
Strong and corrosion-resistant
Aluminium alloy with a sprayed finish holds up to UV and coastal air, with a 4.5 kg load rating to spare.
§ 05Where it fits
Right at home in these scenarios
Compact outdoor cameras
Seat a smaller dome or bullet on the box with the cable join sealed inside, away from rain and UV.
Tidy residential installs
Hide the cable entry behind a compact camera for a clean, professional look on a home.
Uneven or rendered walls
The box gives a flat mounting face and hides any gap between the camera base and the surface.
Retrofits
Cover an existing cable hole when swapping to a new compact Hikvision camera.
§ 06Setup
Installation & setup
What's in the box
One DS-1280ZJ-XS compact junction box with cable entry hardware and mounting screws. The camera and network cable are not included.
Installation requirements
Fix the box to a flat wall that can support at least three times the combined box and camera weight. Route the cable through the entry, fit the waterproof rubber and seal for outdoor use, then mount the camera to the box.
§ 08Questions
Frequently asked about the DS-1280ZJ-XS
Q.01
Which cameras does the DS-1280ZJ-XS fit?
It is the compact box for smaller Hikvision dome and bullet cameras. Because Hikvision matches boxes to camera families rather than single models, check the mounting accessory listed on your camera's datasheet before ordering, or ask us with your camera model and we will confirm.
Q.02
How is the XS different from the larger DS-1280ZJ-S box?
The DS-1280ZJ-XS is the smaller, lighter box at Φ100 mm and about 320 g, suited to compact cameras. The DS-1280ZJ-S is larger, has a cable gland, and suits a broader range of bigger turret and bullet bodies. Match the box to the size of your camera.
Q.03
Do I need a junction box on a small camera?
Not always, but it helps. The box gives a sealed space for the cable and connector and a cleaner finish. It is most worthwhile outdoors, on uneven surfaces, and where you want to hide the cable entry rather than run it across the wall.
Q.04
Is it weatherproof for outdoor use?
Yes. It is aluminium alloy and rated for indoor and outdoor mounting. Fit waterproof rubber at the cable entry and add outdoor silicone where the base meets the wall so rain cannot track behind it.
Q.05
What is the maximum load it can hold?
Hikvision rates the box to a 4.5 kg maximum load, far more than any compatible compact camera. The practical limit is the strength of the wall fixings, so use suitable plugs in masonry.
Q.06
Is the camera included?
No. This listing is the junction box only. It is a mounting accessory you add to the camera it suits.
Q.07
What are the dimensions and weight?
It measures Φ100 mm by 43.2 mm by 129 mm and weighs about 320 g, which makes it one of the more compact boxes in the Hikvision range.
Buying from Smarket
Is your Hikvision, Dahua, HiLook and TP-Link VIGI stock genuine Australian stock?
Yes, 100%. Every Hikvision, Dahua, HiLook and TP-Link VIGI product we sell is a genuine Australian-market model sourced through Australian supply chains — never grey imports. That means factory-sealed units, Australian-region firmware that works with the official apps out of the box, and a full 3-year local warranty.
How long does delivery take?
Order before 2pm (Sydney time) on a business day and in-stock items are dispatched the same day. Most orders arrive within 1–4 business days Australia-wide; remote and regional areas can take a little longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
How much is shipping?
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
What warranty do you offer?
All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
What is your return policy?
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Do you offer installation?
We can connect you with licensed installers in Sydney and Melbourne. Installation typically starts from around $200 per camera depending on cable runs and site conditions. Email sales@smarket.com.au with your address and camera count for a quote.
§ 10Bundles
Recommended packages
Cameras this box suits
The DS-1280ZJ-XS pairs with smaller Hikvision cameras such as the DS-2CD2566G2-I 6MP mini dome and compact bullets like the DS-2CD2T66G2 6MP bullet.
Need more room?
For larger turret and bullet bodies, the bigger DS-1280ZJ-S with a cable gland gives more internal space.
Mini dome wall mount
To extend a mini dome off a wall on an arm, see the DS-1272ZJ-120 wall mount bracket.