Hikvision DS-1280ZJ-S Junction Box with Gland, suits HIK-2CD26, 2CD2T, 2CD4A, 2CD22, 2CD42, E16D5
Skip to product information
1
/
of
1
Vendor:
Hikvision
Hikvision DS-1280ZJ-S Junction Box with Gland, suits HIK-2CD26, 2CD2T, 2CD4A, 2CD22, 2CD42, E16D5
SKU: DS-1280ZJ-S
Description
The Hikvision DS-1280ZJ-S is an aluminium-alloy junction box with a built-in cable gland that mounts behind a Hikvision camera to hide and weatherproof the cable entry. It suits a broad range of Hikvision turret, bullet and dome cameras, including the 2CD26, 2CD2T, 2CD4A, 2CD22 and 2CD42 families.
Key points
- Suits Hikvision 2CD26 / 2CD2T / 2CD4A / 2CD22 / 2CD42 / E16D5 / 2CE1D series cameras
- Built-in cable gland for a sealed cable entry
- Aluminium alloy with a sprayed Hikvision-white finish
- 137 mm × 54 mm × 171.5 mm, approx. 660 g
- Suitable for indoor and outdoor mounting
Regular price
$25.60 AUD
Sale price
$25.60 AUD
Regular price
$35.00 AUD
Sale
26.86%
$9.40 AUD
(26.86%)
Business or bulk buyer? Apply for trade pricing →
Found a lower price? We’ll match it →
Delivery, warranty & returns · shipped from Australian stock
- Tracked delivery on every order. The tracking number is emailed as soon as it ships.
- Metro delivery: 2–4 business days. Regional areas may take longer. Free standard shipping over $300, flat $25 under.
- 3-year warranty on cameras and recorders, back-to-base, plus your Australian Consumer Law rights.
- 30-day returns on unopened items. Faulty on arrival? We cover return shipping.
- Genuine Australian stock. Never grey imports. Prices include GST.
In stock
Hikvision DS-1280ZJ-S Junction Box with Gland, suits HIK-2CD26, 2CD2T, 2CD4A, 2CD22, 2CD42, E16D5
1
/
of
1
All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Metro delivery usually takes 2–4 business days after dispatch, and regional areas may take longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
01Overview
What the DS-1280ZJ-S is
The Hikvision DS-1280ZJ-S is a camera junction box with an integrated cable gland, designed to sit between a Hikvision camera and the mounting surface. It gives you a sealed cavity to coil and protect the network cable and connector, so the join is hidden and shielded rather than exposed on the wall.
It fits a wide range of Hikvision cameras, including the 2CD26 and 2CD2T bullets, 2CD22 and 2CD42 domes, and the 2CD4A, E16D5 and 2CE1D series. The body is machined from aluminium alloy with a sprayed Hikvision-white finish, measures 137 mm by 54 mm by 171.5 mm, and weighs about 660 g. The gland on the box clamps around the cable to keep the entry weather-resistant.
Because Hikvision junction boxes are matched to camera families rather than single models, always confirm the mounting accessory listed on your camera's datasheet before ordering.
02Engineering
DS-1280ZJ-S specifications
- Genuine Hikvision DS-1280ZJ-S camera junction box with built-in cable gland
- Fits Hikvision 2CD26 / 2CD2T / 2CD4A / 2CD22 / 2CD42 / E16D5 / 2CE1D series cameras
- Aluminium alloy body with sprayed Hikvision-white finish for corrosion resistance
- Cable gland gives a sealed, weather-resistant cable entry
- 137 mm x 54 mm x 171.5 mm, approx. 660 g
- Suitable for indoor and outdoor mounting
- Fits Hikvision 2CD26 / 2CD2T / 2CD4A / 2CD22 / 2CD42 / E16D5 / 2CE1D series cameras
- Aluminium alloy body with sprayed Hikvision-white finish for corrosion resistance
- Cable gland gives a sealed, weather-resistant cable entry
- 137 mm x 54 mm x 171.5 mm, approx. 660 g
- Suitable for indoor and outdoor mounting
03Full datasheet
Detailed specifications
General & Environment
| Feature | Detail |
|---|---|
| Description | Junction Box for Dome Camera |
| Appearance | Hikvision White |
| Material | Aluminum Alloy |
| Dimension | 137 mm × 54 mm × 171.5 mm (5.39" × 2.13" × 6.75") |
| Weight | Approx. 660 g (1.46 lb.) |
| Key Feature | Junction Box; Aluminum Alloy; Hikvision White |
| General & Environment — Description | Junction Box for Dome Camera |
|---|---|
| General & Environment — Appearance | Hikvision White |
| General & Environment — Material | Aluminum Alloy |
| General & Environment — Dimension | 137 mm × 54 mm × 171.5 mm (5.39" × 2.13" × 6.75") |
| General & Environment — Weight | Approx. 660 g (1.46 lb.) |
| General & Environment — Key Feature | Junction Box; Aluminum Alloy; Hikvision White |
04Why choose this
Built for the way you actually use the DS-1280ZJ-S
Sealed cable gland
The built-in gland clamps the cable at the entry point, keeping water out along the lead rather than relying on silicone alone.
Protects the connection
The aluminium cavity keeps the network cable, RJ45 and any pigtail out of the weather and out of sight, which is where most outdoor cable faults start.
Built to last outdoors
Aluminium alloy with a sprayed finish resists corrosion in Australian coastal and exposed conditions far better than plastic boxes.
05Where it fits
Right at home in these scenarios
Outdoor turret and bullet installs
Mount a 2CD2T bullet or 2CD22/2CD42 dome with the cable join sealed inside the box, away from rain and UV.
Surface conduit runs
Bring the cable into the gland for a tidy, sealed entry where cable runs in external conduit.
Rough or uneven surfaces
On brick, render or timber the box gives a flat mounting face and hides any gap or oversized cable hole behind the camera.
Retrofits and tidy-ups
Cover an existing cable penetration when upgrading to a new Hikvision camera on the same spot.
06Setup
Installation & setup
-
01
What's in the box
One DS-1280ZJ-S junction box with cable gland and mounting screws. The camera and network cable are not included.
-
02
Installation requirements
Fix the box to a flat wall or ceiling that can support several times the combined weight of the box and camera, using suitable wall plugs in masonry. Bring the network cable in through the gland, seal the entry for outdoor use, then mount the camera onto the box. Add a bead of outdoor silicone around the base on exposed walls.
08Questions
Frequently asked about the DS-1280ZJ-S
Q.01
Which cameras does the DS-1280ZJ-S fit?
It is listed for a broad range of Hikvision cameras, including the 2CD26 and 2CD2T bullets, 2CD22 and 2CD42 domes, and the 2CD4A, E16D5 and 2CE1D series. Because the box suits camera families rather than a single model, check the mounting accessory on your camera's datasheet before ordering.
Q.02
What is the cable gland for?
The gland is the sealed entry point where the network cable passes into the box. It clamps around the cable so water cannot track in along the lead, which is what makes the box suitable for outdoor entries rather than leaving the join open to the weather.
Q.03
Do I actually need a junction box for my camera?
Not always, but it helps. The box gives you a sealed space to coil and protect the cable and connector behind the camera instead of leaving the join exposed. It is most worthwhile outdoors, on uneven surfaces, and where you want a clean cable entry.
Q.04
Is the DS-1280ZJ-S weatherproof for outdoor use?
It is aluminium alloy with a sprayed finish and suits indoor and outdoor mounting. For outdoor installs, seal the cable through the gland and run a bead of outdoor silicone where the base meets the wall so wind-driven rain cannot get behind it.
Q.05
What are the dimensions and weight?
It measures 137 mm by 54 mm by 171.5 mm and weighs about 660 g, which makes it one of the larger Hikvision boxes with room to coil cable for bigger turret and bullet bodies.
Q.06
Is the camera included?
No. This listing is the junction box only. It is a mounting accessory you buy alongside the camera it suits.
Q.07
How is this different from the smaller DS-1280ZJ-XS box?
The DS-1280ZJ-S is the larger box with a cable gland and more internal room, suited to a wide turret, bullet and dome range. The DS-1280ZJ-XS is a compact box for smaller dome and bullet cameras. Match the box to the size of your camera and the cable you need to house.
Buying from Smarket
Is your Hikvision, Dahua, HiLook and TP-Link VIGI stock genuine Australian stock?
Yes, 100%. Every Hikvision, Dahua, HiLook and TP-Link VIGI product we sell is a genuine Australian-market model sourced through Australian supply chains — never grey imports. That means factory-sealed units, Australian-region firmware that works with the official apps out of the box, and a full 3-year local warranty.
How long does delivery take?
Metro delivery usually takes 2–4 business days after dispatch, and regional areas may take longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
How much is shipping?
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
What warranty do you offer?
All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
What is your return policy?
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Do you offer installation?
We can connect you with licensed installers in Sydney and Melbourne. Installation typically starts from around $200 per camera depending on cable runs and site conditions. Email sales@smarket.com.au with your address and camera count for a quote.
10Bundles
Recommended packages
Cameras this box suits
The DS-1280ZJ-S pairs with Hikvision cameras such as the DS-2CD2T86G2H 8MP bullet and the DS-2CD2566G2-I 6MP mini dome.
Other Hikvision junction boxes
Different camera bodies use a different box: smaller cameras suit the DS-1280ZJ-XS, and bullet cameras suit the DS-1260ZJ.
Prefer a wall mount?
To extend the camera off a vertical wall on an arm with concealed cable, see the DS-1273ZJ-140 wall mount bracket.