All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Metro delivery usually takes 2–4 business days after dispatch, and regional areas may take longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
Bosch Solution 6000
Bosch CP155B External Keypad Combo Reader for Bosch 6000
The Bosch CP155B is an external keypad with a built-in smart-prox reader for the Bosch Solution 6000 alarm panel. Rated IP65 and built from UV-resistant plastic, it suits an entry door, gate or carport where you need to arm, disarm and control access from outside.
Key points
- External, IP65 weather-rated, UV-resistant housing
- Built-in smart-prox reader (PR301, PR350, PR365, PR370 cards/tokens)
- Backlit numeric keypad with red, green and blue status LEDs
- For Bosch Solution 6000 / 144 (alarm and access control)
- Encrypted RS485 LAN with front and rear tamper
- 10VDC, 100mA max; occupies one keypad position
Bosch CM710B 4 x Form C Relay Output Expansion Module
The Bosch CM710B is the module for a Solution 6000 or Solution 16i owner who has run out of outputs: it adds four Form C relay outputs, rated 24VDC at 2A MAX, on a PCB that sits in the panel cabinet or in its own enclosure at the far end of the LAN.
What you get
- 1 × CM710B output expansion module PCB with four Form C relay outputs, status LED, separate tamper input and a service code pad connection
You'll also need
Bosch CC610P Solution 6000 Control Panel PCB only
The Bosch CC610P is the control panel PCB for the Bosch Solution 6000 alarm and access control system. It is the board (PCB only) at the heart of a Solution 6000, supporting 16 on-board zones expandable to 144 wired or wireless, eight areas and integrated access control for up to 16 doors.
Key points
- Solution 6000 control panel, supplied as the PCB only
- 16 on-board zones, expandable to 144 (wired or wireless)
- Partitionable into 8 areas; up to 990 users (PIN, token, keyfob, fingerprint)
- 5 on-board outputs, expandable to 37; access control for up to 16 doors
- Up to 16 keypads or readers; reporting by CID, SIA, IP, voice and SMS
- 16-18V AC supply; needs a keypad, enclosure, transformer, battery and detectors to make a system
Bosch RF120 SMART RF 2-Way Base Station for Solution 6000
The Bosch RF120 is the two-way wireless base station for a Solution 6000 system: a 433.42 MHz transceiver on the panel’s RS485 LAN that talks both ways to SMART RF keyfobs and, with Bosch compatibility enabled, to selected Bosch RF detectors, so a site gets wireless devices where cable cannot go.
What you get
- 1 × base station: receiver PWA, front and back case with LED light pipe and cam lock, and an instruction sheet
You’ll also need
- A Solution 6000 panel at version 2.30, or a Vision-X panel at version 2.30
- An RS485 LAN cable run from the panel to the mounting position
- Wireless devices to pair with it, such as the RF110 five-button keyfob
Bosch CM704B 8/16 Zone Expansion Module for Solution 6000
The Bosch CM704B is the zone expansion module for a Solution 6000 system that has run out of detector inputs: a PCB on the panel's 4 wire LAN that adds 8 physical zone inputs, giving 8 or 16 zones depending on the end-of-line configuration.
What you get
- 1 × CM704B 8/16 zone expansion module PCB with status and zone power LEDs, a service code pad connection and a separate tamper input
You'll also need
- A Solution 6000 panel: the CC610P board, the CC610GWP kit or the CC610GWF-2 kit
- One free module space in the panel cabinet or a separate enclosure, plus 4 wire LAN cable to reach it
- Detectors for the new zones, such as these sold here: the ISC-BPR2-WP12 PIR or the DS1101i glass-break detector
Bosch MW350 Metal Surface Mount Enclosure, Solution 6000
The Bosch MW350 is a metal surface-mount enclosure for the Solution 6000 series: a white box with a screwed cover, 260 mm high and 385 mm wide, for mounting a panel where there is no cavity to recess it into.
What you get
- 1 × MW350 metal enclosure, white, with a screwed cover
You'll also need
- The panel board and modules that will go inside it, such as the CC610P
- A plug pack, a battery and a tamper switch, none of which are part of the enclosure
Before you buy
What customers ask most before ordering from this range — and how we deliver.
Which kit is right for me?
Start with three questions: how many areas do you need to cover, do you want colour night vision, and do you want AI alerts that ignore cars and animals? For most homes, a 4-camera 8MP ColorVu or Full-Colour kit is the sweet spot. Not sure? Use our CCTV Advisor — answer a few questions and it recommends a kit — or email us and we'll spec it with you.
Is your Hikvision, Dahua, HiLook and TP-Link VIGI stock genuine Australian stock?
Yes, 100%. Every Hikvision, Dahua, HiLook and TP-Link VIGI product we sell is a genuine Australian-market model sourced through Australian supply chains — never grey imports. That means factory-sealed units, Australian-region firmware that works with the official apps out of the box, and a full 3-year local warranty.
How long does delivery take?
Metro delivery usually takes 2–4 business days after dispatch, and regional areas may take longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
How much is shipping?
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
What warranty do you offer?
All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
What is your return policy?
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Do you offer installation?
We can connect you with licensed installers in Sydney and Melbourne. Installation typically starts from around $200 per camera depending on cable runs and site conditions. Email sales@smarket.com.au with your address and camera count for a quote.
Shop by Brand
Pick your preferred manufacturer ecosystem
Shop by Category
Cameras, recorders, kits and accessories
