All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Metro delivery usually takes 2–4 business days after dispatch, and regional areas may take longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
Products
Bosch CM705PB Universal Zone & Output Expander Solution 6000
The Bosch CM705PB is the universal expander PCB for the Solution 6000: one LAN module that adds up to 16 zone inputs, 4 monitored 500mA outputs and power terminals with a battery charger.
What you get
- Bosch CM705PB universal expander module — PCB only
You'll also need
- A compatible Solution 6000 control panel
- A 16-18V AC 50-60Hz – 24VA External Power Adaptor or internal transformer, a 12V DC, 7.2AH battery for the module's own supply and a suitable enclosure
- Detectors for the new zones and any devices required for the programmable outputs
Bosch CM710B 4 x Form C Relay Output Expansion Module
The Bosch CM710B is the module for a Solution 6000 or Solution 16i owner who has run out of outputs: it adds four Form C relay outputs, rated 24VDC at 2A MAX, on a PCB that sits in the panel cabinet or in its own enclosure at the far end of the LAN.
What you get
- 1 × CM710B output expansion module PCB with four Form C relay outputs, status LED, separate tamper input and a service code pad connection
You'll also need
Bosch CM751B Conettix IP Ethernet Module for Solution 6000
The Bosch CM751B is the plug-on Ethernet module for a Solution 6000 owner who wants the panel on the network instead of a phone line: monitored reporting in Conettix or CSV-IP format with 128 bit AES encryption, remote programming over IP, and the wired path for the MyAlarm app.
What you get
- 1 × CM751B Conettix IP Ethernet module with three PCB standoffs and the HW750 riser kit
You'll also need
- A Solution 6000 control panel, sold here as the CC610P panel PCB or in the CC610GWP panel and keypad kit
- A network cable from the panel cabinet to the router or switch
- A MyAlarm subscription if app control is wanted; it is a paid service that Bosch does not run
Bosch CM796B Wiegand to RS485 LAN Interface Module
The Bosch CM796B is the interface module for a Solution 6000 or Solution 144 site that wants to use a third-party proximity reader: it takes a 26bit to 40bit Wiegand reader such as the PR100B and puts it on the panel's RS485 LAN as a reader address, with LED and buzzer control for the reader.
What you get
- 1 × CM796B module PCB with mounting spacer pack, installer reference guide and 2 shunts
You'll also need
- A Solution 6000 panel on version 2.12 or later, such as the CC610P panel PCB, or a Solution 144 on version 2.08 or later
- A PR100B or other suitable 26bit to 40bit Wiegand reader with matching cards or tokens
- A power supply for the reader, such as the CM720B, wired to the module's separately fused reader power terminals
Bosch CM910 Direct Link & Flash Programming USB Cable
The Bosch CM910 is the installer's USB cable for Bosch Solution panels: a combined direct link and flash programmer that connects a Windows PC to the panel's 10 way serial header for on-site Solution Link programming sessions or firmware updates, with a select switch to choose between the two.
What you get
- 1 × CM910B direct link and flash programmer with a 10 way flying lead to the panel serial port header and a 5 metre USB cable
You'll also need
- A supported panel: Solution 16i, Solution 16Plus, Solution 64, Solution 144 or Solution 6000, sold here as the CC610P board
- A Windows PC with Solution Link software and the USB driver from the Solution Link RAS DVD or alarmsoftware.com.au
- The correct firmware file for the panel when flashing, and a Solution Link backup taken first
- For a panel with a lost installer code, the CM255B default key rather than this cable
Bosch CP155B External Keypad Combo Reader for Bosch 6000
The Bosch CP155B is an external keypad with a built-in smart-prox reader for the Bosch Solution 6000 alarm panel. Rated IP65 and built from UV-resistant plastic, it suits an entry door, gate or carport where you need to arm, disarm and control access from outside.
Key points
- External, IP65 weather-rated, UV-resistant housing
- Built-in smart-prox reader (PR301, PR350, PR365, PR370 cards/tokens)
- Backlit numeric keypad with red, green and blue status LEDs
- For Bosch Solution 6000 / 144 (alarm and access control)
- Encrypted RS485 LAN with front and rear tamper
- 10VDC, 100mA max; occupies one keypad position
Bosch CP736B Solution 6000 Colour Smart Card Keypad
The Bosch CP736B is a 3.5" colour graphic keypad for Solution 6000 owners who want card-based arming and disarming: a built-in 40bit MiFare smart card reader, alphanumeric prompting on a backlit colour screen, and lock and egress terminals for a door at the keypad position.
What you get
- 1 × CP736B colour keypad in white, with a manual and a mounting back plate
You'll also need
- A Solution 6000 or Solution 6000-IP panel, such as the CC610P panel PCB
- Cable for the panel's RS485 LAN, and MiFare cards or tokens if users will arm and disarm by card
- For a door lock: a relay with a protection diode and a separate lock power supply, since the keypad's lock output does not drive a lock directly
Bosch CP737B WIFI Graphic Keypad for Bosch 6000
The Bosch CP737B is a 3.5-inch colour graphic keypad with built-in WiFi and a 40-bit MiFare smart-card reader for the Bosch Solution 6000 and 6000-IP alarm panels. Its colour pixel display shows the system status in plain text and colour, and the built-in WiFi connects to the MyAlarm and iFob Control apps for control from a phone.
Key points
- 3.5-inch colour graphic display with LED backlight
- Built-in 802.11 b/g/n WiFi for the MyAlarm and iFob Control apps
- Built-in 40-bit MiFare smart-card reader (arm/disarm by card or token)
- For Bosch Vision-X, Vision-XIP, Solution 6000 and Solution 6000-IP
- Encrypted RS485 LAN; +12VDC, 110mA max; white housing
- Colour-coded illuminated keys and a programmable sounder
Before you buy
What customers ask most before ordering from this range — and how we deliver.
Which kit is right for me?
Start with three questions: how many areas do you need to cover, do you want colour night vision, and do you want AI alerts that ignore cars and animals? For most homes, a 4-camera 8MP ColorVu or Full-Colour kit is the sweet spot. Not sure? Use our CCTV Advisor — answer a few questions and it recommends a kit — or email us and we'll spec it with you.
Is your Hikvision, Dahua, HiLook and TP-Link VIGI stock genuine Australian stock?
Yes, 100%. Every Hikvision, Dahua, HiLook and TP-Link VIGI product we sell is a genuine Australian-market model sourced through Australian supply chains — never grey imports. That means factory-sealed units, Australian-region firmware that works with the official apps out of the box, and a full 3-year local warranty.
How long does delivery take?
Metro delivery usually takes 2–4 business days after dispatch, and regional areas may take longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
How much is shipping?
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
What warranty do you offer?
All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
What is your return policy?
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Do you offer installation?
We can connect you with licensed installers in Sydney and Melbourne. Installation typically starts from around $200 per camera depending on cable runs and site conditions. Email sales@smarket.com.au with your address and camera count for a quote.
Shop by Brand
Pick your preferred manufacturer ecosystem
Shop by Category
Cameras, recorders, kits and accessories
