All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Metro delivery usually takes 2–4 business days after dispatch, and regional areas may take longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
Alarm
Bosch CM255B Panel Default Unlock Key for Solution 6000
The Bosch CM255B is the way into a Solution panel whose installer PIN nobody knows: a single-use plug-in key that resets the installer PIN and RAS security PIN on a Solution 6000, so the panel is taken over on site instead of being unwired and returned for defaulting.
What you get
- 1 × CM255B factory default module, blue, with red and green status indicators, for one use only
You'll also need
- Access to the panel board and its 10-pin connector marked Serial Port or Direct Link Port, such as on the CC610P
- A new key for every panel defaulted, because a used key cannot be used again
Bosch IUI-SOL-TS5 TouchOne Mini 5" Touchscreen Keypad
The Bosch IUI-SOL-TS5 TouchOne Mini is a high definition 5" touchscreen code pad for Solution 2000, 3000 panels, giving users a graphical way to view critical system status and perform common alarm actions.
What you get
- Bosch IUI-SOL-TS5 TouchOne Mini touchscreen code pad — the product covered by this listing
You'll also need
- A compatible Solution panel, such as the ICP-SOL3-P or ICP-SOL4-P, or a Solution 3000 alarm kit or Solution 2000 alarm kit
- Installation cable and a suitable 12VDC power arrangement for the chosen panel
Dahua DH-ARD2251E-W2, Wireless External Triple-Tech Detector
The Dahua DH-ARD2251E-W2 is an outdoor wireless detector for the Dahua AirShield alarm system that combines three detection technologies — PIR, microwave and an optical verification camera — to catch a real intruder outside while shrugging off the things that fool ordinary outdoor sensors. It detects movement up to 15 metres, has pet immunity to around 40 kg, supports anti-masking, and captures a short verification image so you can confirm an outdoor alarm before you act. It is IP66 rated and links to the hub over an encrypted 868 MHz two-way connection. It works with the ARC3800H AirShield Hub 2 only, which is sold separately.
Key points
- Triple-tech detection: PIR + microwave + optical, with intelligent filtering
- Outdoor range up to 15 m at 90° (1 m mounting height); 3 sensitivity levels
- Pet immunity to about 40 kg / under 80 cm; anti-masking and tamper
- Built-in camera for alarm video verification (IR up to 15 m, 110° view)
- 868 MHz two-way radio with AES128 encryption and frequency hopping; up to 1,600 m
- IP66, -25 to +60 C, 4x CR123A; works with the ARC3800H AirShield Hub 2 only
Dahua DHI-ARM7012-W2 Wireless WallSwitch
The Dahua DHI-ARM7012-W2 is a wireless WallSwitch for the Dahua AirShield alarm system. It lets you switch a mains appliance on or off remotely from the DMSS app, run it on a schedule or trigger it from an alarm event, and it monitors how much power that appliance is using. It handles loads up to 13 A at 100-240 VAC and links to your AirShield hub over an encrypted two-way wireless connection. An AirShield hub is required and sold separately.
Key points
- Remote on/off control of a 100-240 VAC appliance, up to 13 A
- Single relay output, switchable as normally-open or normally-closed
- Live energy monitoring: voltage, current and consumption in the DMSS app
- Overheat and overload protection built in
- Encrypted two-way wireless (AES128, frequency hopping) with jamming detection
- Range up to 1,200 m in open space to the hub
- Mains powered, indoor wall mount; requires a Dahua AirShield hub
Dahua DHI-ARD912-W2(D) Wireless Water Leak Detector
The Dahua DHI-ARD912-W2(D) is a wireless water-leak detector for the Dahua AirShield alarm system. Place it on the floor by a washing machine, dishwasher, hot-water unit or under a sink and it raises an alarm the moment water reaches its probe, so you catch a leak before it does real damage. This (D) version has an adjustable-height probe, so you can set how deep the water has to pool before it alarms, and the casing is IPX5 water-resistant. It links to your AirShield hub over an encrypted two-way RF connection. An AirShield hub is required and sold separately.
Key points
- Alarms as soon as water reaches the probe
- Adjustable-height probe sets the trigger depth and sensitivity
- IPX5 water-resistant casing; no wiring, easy to place
- Encrypted two-way RF link with frequency hopping and jamming detection
- Ambient temperature display and overheat alarm
- CR123A battery, around 3 years; indoor; requires an AirShield hub
Dahua DHI-ARM320-W2 Wireless Input Expander
The Dahua DHI-ARM320-W2 is a wireless input expander for the Dahua AirShield alarm system. It lets you connect an existing third-party wired detector — a PIR, reed, smoke or panic device — and bring it into your wireless alarm, so when that detector triggers, the expander reports it to the hub over the air. It can even supply low-voltage power to the connected detector, and it runs for years on its own batteries. An AirShield hub is required and sold separately.
Key points
- Connects a third-party wired detector to the Dahua AirShield wireless system
- One alarm input plus a second input for the detector's tamper port
- Six alarm types selectable in the app: intrusion, medical, fire, emergency, gas, tamper
- Auxiliary 3.3 V output (up to 10 mA) to power the connected detector
- Encrypted two-way wireless (AES128, frequency hopping), up to 1,300 m
- Triaxial accelerometer for a device-moved alarm; tamper protection
- 4 x AA batteries for around 3 years of life; indoor; requires a Dahua AirShield hub
Dahua DHI-ARC3800H-FW2 Wireless Alarm Hub 2
The Dahua DHI-ARC3800H-FW2 is the Alarm Hub 2, the brain of a Dahua AirShield wireless alarm system. It manages your wireless detectors, sirens, keypads and keyfobs, decides when to raise an alarm, and notifies you through the free DMSS app. It connects three ways — Ethernet, Wi-Fi and 4G cellular — so it keeps reporting even if one network drops, and a built-in rechargeable battery keeps it running through a power cut. Wireless peripherals are required and sold separately.
Key points
- Central hub for the AirShield system; up to 150 wireless and wired peripherals across 32 areas
- Triple connectivity: Ethernet (RJ45), Wi-Fi and 4G cellular (dual SIM) with multi-network redundancy
- Built-in 4,750 mAh battery for around 12 hours of backup during a power cut
- 868 MHz two-way radio to peripherals with AES128 encryption and frequency hopping
- Alarm video verification from up to 8 IP cameras; SMS and phone-call alerts to 12 numbers
- Self-monitor free in DMSS with no monthly fees, or link to a monitoring centre (SIA / SoftGuard)
- Arm by app, keypad, keyfob, card, SMS or schedule; wireless peripherals sold separately
Dahua DHI-ARM310-W2 Wireless Input Expander
The Dahua DHI-ARM310-W2 is a wireless input expander for the Dahua AirShield alarm system. It takes a single wired detector — one that only comes in a hard-wired form, or an existing wired sensor you want to keep — and reports it to the hub wirelessly, so you can fold a wired device into an otherwise wireless system without running cable back to a panel. It links to the hub over an encrypted two-way RF connection and runs on a battery. An AirShield hub is required and sold separately.
Key points
- Converts one wired (NO/NC) detector input into an AirShield wireless zone
- Reports six alarm types: intrusion, medical, fire, emergency, gas and tamper
- Encrypted two-way RF link with frequency hopping; signal-strength check
- Ambient temperature monitoring and low-battery alarm
- 4 x AA batteries for around 3 years (NO input) or 2 years (NC/pulse)
- Indoor, bracket mount; requires a Dahua AirShield hub
Before you buy
What customers ask most before ordering from this range — and how we deliver.
Which kit is right for me?
Start with three questions: how many areas do you need to cover, do you want colour night vision, and do you want AI alerts that ignore cars and animals? For most homes, a 4-camera 8MP ColorVu or Full-Colour kit is the sweet spot. Not sure? Use our CCTV Advisor — answer a few questions and it recommends a kit — or email us and we'll spec it with you.
Is your Hikvision, Dahua, HiLook and TP-Link VIGI stock genuine Australian stock?
Yes, 100%. Every Hikvision, Dahua, HiLook and TP-Link VIGI product we sell is a genuine Australian-market model sourced through Australian supply chains — never grey imports. That means factory-sealed units, Australian-region firmware that works with the official apps out of the box, and a full 3-year local warranty.
How long does delivery take?
Metro delivery usually takes 2–4 business days after dispatch, and regional areas may take longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
How much is shipping?
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
What warranty do you offer?
All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
What is your return policy?
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Do you offer installation?
We can connect you with licensed installers in Sydney and Melbourne. Installation typically starts from around $200 per camera depending on cable runs and site conditions. Email sales@smarket.com.au with your address and camera count for a quote.
Alarms by Brand
Compare alarm systems across the range
Security Cameras
Add cameras alongside your alarm system
