All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Metro delivery usually takes 2–4 business days after dispatch, and regional areas may take longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
Alarm
Bosch CC610GWP Solution 6000 Panel PCB + CP736B Keypad
The Bosch CC610GWP combines the Solution 6000 CC610P control panel PCB with the CP736B smart proximity keypad for homeowners and businesses that need an Australian-designed and manufactured intrusion and access control system with 16 on-board zones expandable to 144.
What you get
- 1 × CC610P Solution 6000 control panel PCB — 16 on-board zones, partitionable to 8 areas, with 5 on-board outputs
- 1 × CP736B smart proximity keypad — alphanumeric LCD, text-driven menu and colour coded, illuminated keys
You'll also need
- A compatible enclosure such as the MW720B or MW730B
- The specified primary power source and a 12 VDC, 7.2AH sealed rechargeable battery
- Detectors, a siren and strobe, and a qualified and licensed security installer to wire, program and commission the system
Bosch RFUN RADION Wireless Universal Transmitter with Input
The Bosch RFUN is the RADION universal transmitter: a wireless door contact with a loop input beside it, so an existing wired detector, a roller-door switch or a panic button can report to the alarm panel without a cable run.
What you get
- 1 × RFUN wireless universal transmitter, the version for Europe, Africa and Australia
You'll also need
- A RADION receiver on the alarm panel that lists the RFUN among the devices it accepts
- The magnet assembly that pairs with it, fitted to the moving part of the door or window
- A CR123A lithium battery when the time comes to replace it
- Short cable of 0.65 mm to 1.5 mm between the transmitter and the external device, if the loop input is used
Bosch HCT-4 Four Button Keyfob for the WE800EV2 Receiver
The Bosch HCT-4 is the extra keyfob for a Bosch alarm running a WE800EV2 receiver: four fixed buttons for away arming, stay arming and two relay outputs, with a panic alarm on two buttons held together.
What you get
- 1 × HCT-4 four-button keyfob transmitter, silver
You'll also need
- A WE800EV2 receiver already fitted to the alarm panel, such as the one in the WE800EV2KIT
- An installer or a competent user to learn the new fob into the receiver, which holds a maximum of 21
- A 12VDC 27A battery when the time comes to replace it
Bosch RF3405E Wireless Inertia Transmitter with Reed Switch
The Bosch RF3405E puts three kinds of sensing in one wireless housing: an inertia sensor that feels an attack on the frame, a magnetic reed switch that sees the door or window open, and a supervised input for an external dry contact, reporting on 433.42 MHz. The transmitter is set to monitor either the inertia sensor or the external loop, not both at once.
What you get
- 1 × RF3405E wireless inertia transmitter
You'll also need
- A compatible wireless receiver on the alarm panel, such as the RFRC-STR2, which lists this transmitter among its DSRF devices
- The magnet assembly that pairs with it, fitted to the moving part of the door or window
- A 3 VDC lithium battery when the time comes to replace it: a Duracell DL123A, Energizer EL123AP or Panasonic CR123A
- End-of-line resistors if the external input will supervise a dry contact device
Honeywell 2012/24AUSI Photoelectric Smoke Alarm with Sounder
The Honeywell 2012/24AUSI is a low-voltage photoelectric smoke alarm with its own sounder: it wakes the room on its own at 85dB(A), interconnects with up to 24 alarms in total, and reports to a security panel or access control system through a Form C relay.
What you get
- 1 × 2012/24AUSI photoelectric smoke alarm in a low-profile ceiling-white housing
- 1 × mounting ring and a 9 VDC back-up battery, both supplied with the alarm
You'll also need
- A 10 VDC to 30 VDC supply, typically from an alarm panel. The ICP-SOL3-P and CC610P are the panels sold here; check their supply and zone inputs against the figures below
- Four-wire cable from the panel for power and the relay, plus the end-of-line resistors the panel requires
- A ceiling position in the area to be protected, and cable between alarms if they are to interconnect
Bosch CC610GWF-2 144-Zone Panel + CP737B Wi-Fi Keypad
The Bosch CC610GWF-2 pairs the Solution 6000 control panel PCB with a colour Wi-Fi keypad for homes and small businesses seeking MyAlarm app compatibility.
What you get
- CC610PB Solution 6000 control panel PCB — 16 on-board zones, 8 areas, 5 on-board outputs, 256 users and access control for up to 16 doors
- CP737B graphic keypad — 3.5" colour display, 40bit MiFare smart card reader and 802.11 b/g/n Wi-Fi built in
- Keypad manual and mounting back plate
You'll also need
- An MW720B or MW730B enclosure selected with your licensed security installer
- A 16-18V A.C 50-60Hz - 24VA External Power Adaptor or 220-240V A.C. to 18V A.C 50-60Hz - 24VA Internal Transformer, plus a 12 VDC, 7.2AH sealed rechargeable back-up battery
- Detectors, alarm outputs and a MyAlarm subscription if you want app control
- A qualified and licensed security installer to fit and commission the system
Digiflex MY369AU 4G GPRS/IP Interface Module Solution 6000
The Digiflex MY369AU gives a Bosch Solution 6000 a mobile data path for reporting and app control where a wired internet connection is unreliable or absent: a 4G GPRS/IP interface module with a dual carrier SIM and an RJ45 port, antenna included, for panels on firmware V2.51.04+.
What you get
- 1 × MY369AU 4G GPRS/IP interface module with its antenna
You’ll also need
- A Bosch Solution 6000 control panel on firmware V2.51.04 or later
- A MyAlarm subscription for the app and its notifications
Bosch ISC-PDL1-W18G Professional TriTech Detector, 18 m x 25 m
The Bosch ISC-PDL1-W18G is the Professional Series TriTech detector for a large commercial space: PIR and 10.525 GHz microwave working together over 18 m x 25 m, switchable down to 8 m x 10 m, with anti-mask supervision and SCEC approval for Australia.
What you get
- 1 × ISC-PDL1-W18G TriTech detector, white, in a high-impact ABS enclosure with a built-in bubble level
You'll also need
- An alarm panel with a spare zone and a 24-hour tamper circuit. The ICP-SOL3-P and CC610P are the panels sold here; check their zone inputs against the figures below
- Cable from the panel carrying 9 VDC to 15 VDC, the alarm relay, the trouble relay and the tamper, sized 0.2 mm² to 1 mm², plus the end-of-line resistors the panel requires
- A bracket if it is not going flat on a wall or into a corner, such as the B338 ceiling mount
Before you buy
What customers ask most before ordering from this range — and how we deliver.
Which kit is right for me?
Start with three questions: how many areas do you need to cover, do you want colour night vision, and do you want AI alerts that ignore cars and animals? For most homes, a 4-camera 8MP ColorVu or Full-Colour kit is the sweet spot. Not sure? Use our CCTV Advisor — answer a few questions and it recommends a kit — or email us and we'll spec it with you.
Is your Hikvision, Dahua, HiLook and TP-Link VIGI stock genuine Australian stock?
Yes, 100%. Every Hikvision, Dahua, HiLook and TP-Link VIGI product we sell is a genuine Australian-market model sourced through Australian supply chains — never grey imports. That means factory-sealed units, Australian-region firmware that works with the official apps out of the box, and a full 3-year local warranty.
How long does delivery take?
Metro delivery usually takes 2–4 business days after dispatch, and regional areas may take longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
How much is shipping?
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
What warranty do you offer?
All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
What is your return policy?
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Do you offer installation?
We can connect you with licensed installers in Sydney and Melbourne. Installation typically starts from around $200 per camera depending on cable runs and site conditions. Email sales@smarket.com.au with your address and camera count for a quote.
Alarms by Brand
Compare alarm systems across the range
Security Cameras
Add cameras alongside your alarm system
