All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Metro delivery usually takes 2–4 business days after dispatch, and regional areas may take longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
Alarm
Bosch CDL2-15G Commercial Series Gen2 TriTech Detector 15 m
The Bosch CDL2-15G is a hardwired Commercial Series Gen2 TriTech motion detector that pairs passive infrared with a 10.525 GHz microwave Doppler radar over a 15 m x 15 m pattern, and builds the end-of-line resistors, a bubble level and a lift-gate terminal strip into the housing so installation can be faster by up to 45%.
What you get
- CDL2-15G Commercial Series Gen2 TriTech detector (order number F.01U.383.078) — alarm relay, trouble relay and supervised tamper contacts, with DIP-selectable end-of-line resistors on board
You'll also need
- A hardwired alarm system with a 9 VDC to 15 VDC supply and supervised normally-closed inputs matching the detector's alarm, trouble and tamper contacts
- Cable of Ø 0.40 mm to 1.29 mm from the detector to the alarm equipment; its EOL values must match the 1.0 k, 2.2 k or 33 k resistors built into the detector before they can be used
- The optional B338 ceiling-mount bracket for a ceiling position; the B328 gimbal and B335-3 swivel brackets are the angled wall options
Bosch ISC-PPR1-W16 Professional Series PIR Detector, 18 m x 25 m
The Bosch ISC-PPR1-W16 is the Professional Series passive infrared detector for a large indoor commercial space: 18 m x 25 m of coverage, switchable to 8 m x 10 m, with tri-focus optics and sensor data fusion doing the work that keeps false alarms down.
What you get
- 1 × ISC-PPR1-W16 detector in a white high-impact ABS enclosure
- 1 × hardware pack with two flat-head screws, two screw anchors, a nylon cable tie and a pattern mask, plus a literature pack
You'll also need
- An alarm panel with a spare zone and a 24-hour tamper circuit, supplying 9 VDC to 15 VDC. The ICP-SOL3-P and CC610P are the panels sold here; check their zone inputs against the figures below
- Cable from the panel for the 9 VDC to 15 VDC supply, the alarm relay and the tamper, sized 0.2 mm2 to 1 mm2, plus the end-of-line resistors the panel requires
- A bracket if it is not going flat on a wall or into a corner, such as the B338 ceiling mount
Bosch RFDW-RM RADION Wireless Recessed Door Contact
The Bosch RFDW-RM is the RADION contact that nobody sees: a wireless magnetic reed switch in a slim cylinder that drills into the door or window frame, leaving the opening protected and the hardware hidden.
What you get
- 1 × RFDW-RM recessed contact and its magnet assembly
- 1 × AAA lithium battery, 1 × hardware pack and 1 × installation guide
You'll also need
Bosch ISC-SK10 Shock Sensor, 3-Axis Vibration Detection
The Bosch ISC-SK10 is a shock sensor for the attack that happens before anything opens: hammering, drilling or sawing at a safe, a strongroom door or a shopfront window. Intelligent 3-axis vibration detection reads the attack, and a normally-closed relay reports it to the alarm panel.
What you get
- 1 × ISC-SK10 shock sensor
- 1 × hardware pack and 1 × installation guide
You'll also need
- An alarm panel with a spare zone that accepts a normally-closed relay and tamper loop, and supplies 9 to 15 VDC. The ICP-SOL3-P and CC610P are the panels sold here; check the zone input against those figures
- A cable run from the panel carrying its 9 to 15 VDC supply, the alarm relay and the tamper, plus the end-of-line resistors the panel requires
- A flat indoor surface to mount it on: metal, glass, concrete or wood
Bosch CM910 Direct Link & Flash Programming USB Cable
The Bosch CM910 is the installer's USB cable for Bosch Solution panels: a combined direct link and flash programmer that connects a Windows PC to the panel's 10 way serial header for on-site Solution Link programming sessions or firmware updates, with a select switch to choose between the two.
What you get
- 1 × CM910B direct link and flash programmer with a 10 way flying lead to the panel serial port header and a 5 metre USB cable
You'll also need
- A supported panel: Solution 16i, Solution 16Plus, Solution 64, Solution 144 or Solution 6000, sold here as the CC610P board
- A Windows PC with Solution Link software and the USB driver from the Solution Link RAS DVD or alarmsoftware.com.au
- The correct firmware file for the panel when flashing, and a Solution Link backup taken first
- For a panel with a lost installer code, the CM255B default key rather than this cable
Bosch CM796B Wiegand to RS485 LAN Interface Module
The Bosch CM796B is the interface module for a Solution 6000 or Solution 144 site that wants to use a third-party proximity reader: it takes a 26bit to 40bit Wiegand reader such as the PR100B and puts it on the panel's RS485 LAN as a reader address, with LED and buzzer control for the reader.
What you get
- 1 × CM796B module PCB with mounting spacer pack, installer reference guide and 2 shunts
You'll also need
- A Solution 6000 panel on version 2.12 or later, such as the CC610P panel PCB, or a Solution 144 on version 2.08 or later
- A PR100B or other suitable 26bit to 40bit Wiegand reader with matching cards or tokens
- A power supply for the reader, such as the CM720B, wired to the module's separately fused reader power terminals
Bosch RFSM2-A RADION Wireless Photoelectric Smoke Detector
The Bosch RFSM2-A is a RADION wireless smoke detector for homes that want fire detection on their Bosch alarm panel without running cable: photoelectric smoke sensing plus fixed and fast-rise heat sensing, its own 85 dBA sounder, and supervised reporting to the panel over 433.42 MHz radio.
What you get
- 1 × RFSM2-A detector with the radio module and two CR123A batteries installed
- 2 mounting screws and 2 wall anchors
You'll also need
- A B810 wireless SDI2 bus interface at the panel
- A compatible panel. Bosch lists the G Series B9512G and B8512G, the B Series B6512, B5512, B4512 and B3512, and the GV4 Series D9412GV4 and D7412GV4 at v2.00 or higher; on a Solution 6000 support was added in firmware V2.53.19
- An indoor, dry ceiling or wall position on a flat rigid surface
Bosch CM705PB Universal Zone & Output Expander Solution 6000
The Bosch CM705PB is the universal expander PCB for the Solution 6000: one LAN module that adds up to 16 zone inputs, 4 monitored 500mA outputs and power terminals with a battery charger.
What you get
- Bosch CM705PB universal expander module — PCB only
You'll also need
- A compatible Solution 6000 control panel
- A 16-18V AC 50-60Hz – 24VA External Power Adaptor or internal transformer, a 12V DC, 7.2AH battery for the module's own supply and a suitable enclosure
- Detectors for the new zones and any devices required for the programmable outputs
Before you buy
What customers ask most before ordering from this range — and how we deliver.
Which kit is right for me?
Start with three questions: how many areas do you need to cover, do you want colour night vision, and do you want AI alerts that ignore cars and animals? For most homes, a 4-camera 8MP ColorVu or Full-Colour kit is the sweet spot. Not sure? Use our CCTV Advisor — answer a few questions and it recommends a kit — or email us and we'll spec it with you.
Is your Hikvision, Dahua, HiLook and TP-Link VIGI stock genuine Australian stock?
Yes, 100%. Every Hikvision, Dahua, HiLook and TP-Link VIGI product we sell is a genuine Australian-market model sourced through Australian supply chains — never grey imports. That means factory-sealed units, Australian-region firmware that works with the official apps out of the box, and a full 3-year local warranty.
How long does delivery take?
Metro delivery usually takes 2–4 business days after dispatch, and regional areas may take longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
How much is shipping?
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
What warranty do you offer?
All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
What is your return policy?
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Do you offer installation?
We can connect you with licensed installers in Sydney and Melbourne. Installation typically starts from around $200 per camera depending on cable runs and site conditions. Email sales@smarket.com.au with your address and camera count for a quote.
Alarms by Brand
Compare alarm systems across the range
Security Cameras
Add cameras alongside your alarm system
