All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Metro delivery usually takes 2–4 business days after dispatch, and regional areas may take longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
Alarm
Bosch BOSPR116B Mullion Prox Reader Ext White Plastic
The Bosch PR116B is an external smart-card reader in a white mullion housing for the Bosch Solution 6000 alarm panel. Rated IP66 and made from vandal-resistant ASA plastic, it lets users arm, disarm and control a door by presenting a MiFare card or token at an entry point.
Key points
- External, IP66 weather-resistant, white mullion housing
- MiFare 40-bit smart-card reader (PR301B, PR350B, PR365B tokens)
- Alarm and access control on the Bosch Solution 6000 (also 16i and 144)
- Encrypted RS485 LAN with two-way authentication; occupies one keypad position
- Red, green and blue LEDs for area and door-lock status
- 10 to 14.5VDC, 100mA max; 500mA lock output and egress input
Bosch RF120 SMART RF 2-Way Base Station for Solution 6000
The Bosch RF120 is the two-way wireless base station for a Solution 6000 system: a 433.42 MHz transceiver on the panel’s RS485 LAN that talks both ways to SMART RF keyfobs and, with Bosch compatibility enabled, to selected Bosch RF detectors, so a site gets wireless devices where cable cannot go.
What you get
- 1 × base station: receiver PWA, front and back case with LED light pipe and cam lock, and an instruction sheet
You’ll also need
- A Solution 6000 panel at version 2.30, or a Vision-X panel at version 2.30
- An RS485 LAN cable run from the panel to the mounting position
- Wireless devices to pair with it, such as the RF110 five-button keyfob
Bosch Remote Control ,5 button, Smart RF Keyfob, RF110
The Bosch RF110 is a 5-button Smart RF keyfob for the Bosch Solution 6000 alarm system. It gives handheld arm and disarm, area control and output triggering, and works with the RF120 Smart RF Base Station receiver, which is sold separately.
Highlights
- 5-button Smart RF keyfob for the Bosch Solution 6000
- Each button supports two functions: a single press and a 2-second hold-down
- Arm and disarm, control areas or part modes, and trigger outputs such as a gate or door
- Requires the Bosch RF120 Smart RF Base Station (sold separately)
- Not compatible with Solution 2000/3000 or with B810/STR receivers
Bosch ICP-SOL3-P Solution 3000 16 Zone Alarm Control Panel
The Bosch ICP-SOL3-P is the Solution 3000 control panel board, the new-generation panel Bosch makes for small residential and commercial sites: 16 fully programmable zones that split into two independent areas, room for four keypads, and phone control once a communicator is added.
What you get
- 1 × ICP-SOL3-P control panel PCB with a built-in PSTN dialler
- Hardware pack: end-of-line resistors, battery wires, PSTN lead and screws
You'll also need
- An enclosure to mount it in, such as the ICP-SOL-ENC
- The TF008 plug pack for primary power and a 12 VDC, 6.5Ah sealed lead-acid battery for backup
- At least one keypad: the IUI-SOL-ICON, the IUI-SOL-TEXT or a touchscreen such as the IUI-SOL-TS5
- Detectors and cable for the zones, and a B426-M or B450-M communicator if the owner wants the phone app
- A WE800EV2 or RADION receiver if wireless devices are part of the system, such as the WE800EV2KIT
Bosch CM704B 8/16 Zone Expansion Module for Solution 6000
The Bosch CM704B is the zone expansion module for a Solution 6000 system that has run out of detector inputs: a PCB on the panel's 4 wire LAN that adds 8 physical zone inputs, giving 8 or 16 zones depending on the end-of-line configuration.
What you get
- 1 × CM704B 8/16 zone expansion module PCB with status and zone power LEDs, a service code pad connection and a separate tamper input
You'll also need
- A Solution 6000 panel: the CC610P board, the CC610GWP kit or the CC610GWF-2 kit
- One free module space in the panel cabinet or a separate enclosure, plus 4 wire LAN cable to reach it
- Detectors for the new zones, such as these sold here: the ISC-BPR2-WP12 PIR or the DS1101i glass-break detector
Bosch BOSISC-PB1-100 panic button
The Bosch ISC-PB1-100 (ND 100 GLT) is a wired panic button that connects to a zone on a standard intrusion alarm panel. Pressing it manually and discreetly triggers an alarm, for places at risk of a hold-up such as shops, offices and homes. It is a hardwired device with a built-in tamper contact.
Key points
- Wired panic / hold-up button for any standard intrusion panel zone
- DC circuit (GLT) technology with a built-in tamper contact
- Surface or flush cable mounting; optional cover cap to prevent false presses
- 12 to 30VDC, 0.5mA max; compact 81mm round ABS housing, 70g
- IP40, indoor use; 0 to 50 degrees C
- Supplied with adhesive seal and installation note
Bosch MW350 Metal Surface Mount Enclosure, Solution 6000
The Bosch MW350 is a metal surface-mount enclosure for the Solution 6000 series: a white box with a screwed cover, 260 mm high and 385 mm wide, for mounting a panel where there is no cavity to recess it into.
What you get
- 1 × MW350 metal enclosure, white, with a screwed cover
You'll also need
- The panel board and modules that will go inside it, such as the CC610P
- A plug pack, a battery and a tamper switch, none of which are part of the enclosure
Bosch MW250 Metal Enclosure for Solution 880, 2000 and 3000
The Bosch MW250 is the compact metal enclosure for Solution 880, 2000 and 3000 alarm panels: 260 mm wide, 260 mm high and 70 mm deep, for a small system that does not need a full-size cabinet.
What you get
- 1 × MW250 metal enclosure
You'll also need
- The panel board that will go inside it, such as the ICP-SOL3-P
- A plug pack, a battery and a tamper switch, none of which are part of the enclosure
Before you buy
What customers ask most before ordering from this range — and how we deliver.
Which kit is right for me?
Start with three questions: how many areas do you need to cover, do you want colour night vision, and do you want AI alerts that ignore cars and animals? For most homes, a 4-camera 8MP ColorVu or Full-Colour kit is the sweet spot. Not sure? Use our CCTV Advisor — answer a few questions and it recommends a kit — or email us and we'll spec it with you.
Is your Hikvision, Dahua, HiLook and TP-Link VIGI stock genuine Australian stock?
Yes, 100%. Every Hikvision, Dahua, HiLook and TP-Link VIGI product we sell is a genuine Australian-market model sourced through Australian supply chains — never grey imports. That means factory-sealed units, Australian-region firmware that works with the official apps out of the box, and a full 3-year local warranty.
How long does delivery take?
Metro delivery usually takes 2–4 business days after dispatch, and regional areas may take longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
How much is shipping?
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
What warranty do you offer?
All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
What is your return policy?
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Do you offer installation?
We can connect you with licensed installers in Sydney and Melbourne. Installation typically starts from around $200 per camera depending on cable runs and site conditions. Email sales@smarket.com.au with your address and camera count for a quote.
Alarms by Brand
Compare alarm systems across the range
Security Cameras
Add cameras alongside your alarm system
