Bosch BOSISC-PB1-100 panic button
1 1
Bosch

Bosch BOSISC-PB1-100 panic button

SKU: BOSISC-PB1-100
Description

The Bosch ISC-PB1-100 (ND 100 GLT) is a wired panic button that connects to a zone on a standard intrusion alarm panel. Pressing it manually and discreetly triggers an alarm, for places at risk of a hold-up such as shops, offices and homes. It is a hardwired device with a built-in tamper contact.

Key points
- Wired panic / hold-up button for any standard intrusion panel zone
- DC circuit (GLT) technology with a built-in tamper contact
- Surface or flush cable mounting; optional cover cap to prevent false presses
- 12 to 30VDC, 0.5mA max; compact 81mm round ABS housing, 70g
- IP40, indoor use; 0 to 50 degrees C
- Supplied with adhesive seal and installation note
$51.50 AUD $51.50 AUD $52.00 AUD
Sale 0.96% $0.50 AUD (0.96%)
Business or bulk buyer? Apply for trade pricing →
Found a lower price? We’ll match it →

inc GST + 3 Year Warranty & Support
Free shipping over AUD300

In stock
3-Year WarrantyOn all cameras
Free ShippingOn orders over $300
30-Day ReturnsUnopened items
Fast Delivery1–5 days Australia-wide
Build your setup Build a complete CCTV system

A camera needs an NVR, a hard drive, and cabling to work. Add everything below, or pick a ready-made kit.

Add accessories Optional. Junction box → hides & weatherproofs cable joins (best for outdoors). Brackets → only if mounting on a corner or under eaves. Cable → one per camera; skip if you already have your own.
0
0
0
0
0
0
Bundle total: $51.50

§ 01Overview

What the BOSISC-PB1-100 is

The Bosch ISC-PB1-100, also known as the ND 100 GLT panic button, is a simple wired button that sends an immediate alarm when pressed. It is wired to a zone on a standard intrusion alarm panel and is used to raise the alarm by hand, discreetly, in places that can be at risk of a hold-up, such as banks, jewellers, shops, reception desks and private homes.

It uses DC circuit (GLT) technology for reliable connection to the panel and has a built-in tamper contact, so the system is alerted if the button is opened or interfered with. The cable can be surface run or flush mounted, and an optional cover cap (order number 3902115343) can be added to help prevent accidental or false activation. The housing is a compact 81mm round ABS button weighing 70g, drawing only 0.5mA at 12 to 30VDC.

The ISC-PB1-100 is rated IP40 for indoor use and operates from 0 to 50 degrees C. It is a wired device, not wireless, and is fitted by a licensed installer who wires it to a panel zone and programs that zone as a panic or hold-up input. It is supplied with an adhesive seal and an installation note.

§ 02Engineering

BOSISC-PB1-100 specifications

- Wired panic / hold-up button that connects to a zone on a standard intrusion alarm panel for an immediate, manually triggered alarm.

- DC circuit (GLT) technology for reliable integration with the panel, with a built-in tamper contact that alerts the system if the button is opened or removed.

- Surface or flush cable mounting, with an optional cover cap (order number 3902115343) to help prevent accidental or false activation.

- Very low power draw of 0.5mA max at 12 to 30VDC, so it adds almost no load to the panel.

- Compact 81mm round ABS housing (RAL 9002) weighing 70g, rated IP40 for indoor use and 0 to 50 degrees C.

- Supplied with the panic button, an adhesive seal and an installation note.

§ 03Full datasheet

Detailed specifications

Event & Alarm

Event & Alarm — Bosch BOSISC-PB1-100 panic button
FeatureDetail
Function Panic button for unobtrusively and manually triggering alarms at work places that are in potential danger of being held up, such as banks, jewelry shops, businesses, private households etc.
Tamper Contact Yes
Trigger Technology Panic button in DC circuit technology (GLT)
Use With For connecting to an intrusion panel

§ 04Why choose this

Built for the way you actually use the BOSISC-PB1-100

Raise the alarm by hand

A single press sends an immediate alarm, useful for staff or family who need a fast, discreet way to call for help.

Discreet and tamper-protected

The compact button can be mounted out of sight under a counter or desk, and a built-in tamper contact reports interference.

Works with any standard panel

DC circuit (GLT) wiring connects it to a zone on a standard intrusion panel, so it suits Bosch and other systems.

Backed locally

Supplied by an authorised Bosch dealer with a 3-year warranty and Australia-wide support.

§ 05Where it fits

Right at home in these scenarios

Shop and reception counters

Mount under a counter so staff can trigger a hold-up alarm without being seen.

Home duress point

Place a panic button by the bed or front door so the household can raise the alarm quickly.

Offices and back-of-house

Provide a fixed point to call for help in cash offices, pharmacies and similar sites.

Avoiding false trips

Add the optional cover cap where accidental presses are a concern, such as a busy counter.

§ 06Setup

Installation & setup

01

What it is

A wired panic / hold-up button (not wireless). It connects to one zone on a standard intrusion alarm panel and is programmed as a panic or hold-up input.

02

Wiring

DC circuit (GLT) technology; cable can be surface run or flush mounted. The button draws 0.5mA max at 12 to 30VDC and has a tamper contact to wire in.

03

Mounting

Indoor use only (IP40). Mount it discreetly where it can be reached quickly, such as under a counter or beside a door.

04

Professional install

In Australia a Bosch alarm should be installed by a licensed security installer, who wires the device to the panel, programs it and tests the system. Add the optional cover cap (3902115343) where false presses are a risk.

§ 07Questions

Frequently asked about the BOSISC-PB1-100

Q.01

What is the ISC-PB1-100 used for?
It is a wired panic or hold-up button that sends an immediate alarm when pressed, for places at risk of a hold-up such as shops, offices and homes.
Q.02

Is it wireless?
No. It is a hardwired button that connects to a zone on a standard intrusion alarm panel using DC circuit (GLT) technology.
Q.03

Which panels does it work with?
Any standard intrusion panel with a spare zone, including Bosch Solution panels. The installer programs the zone as a panic or hold-up input.
Q.04

Does it have tamper protection?
Yes. It has a built-in tamper contact that alerts the system if the button is opened or interfered with.
Q.05

Can I stop accidental presses?
Yes. An optional cover cap (order number 3902115343) can be added to help prevent accidental or false activation.
Q.06

Can it be used outdoors?
No. It is rated IP40 for indoor use, from 0 to 50 degrees C.
Q.07

How is it powered?
From the panel zone at 12 to 30VDC, drawing only 0.5mA max.
Q.08

Who installs it?
A licensed installer wires it to a panel zone, sets up the tamper and programs the zone.

§ 09Bundles

Recommended packages

02

Solution 6000 panel

Building a Solution 6000 from parts? See the CC610P control panel.

03

Add detection too

Pair the panic button with motion detection such as the wired BDL2-WP12G pet PIR.