Alarm

The Bosch ISC-PB1-100 (ND 100 GLT) is a wired panic button that connects to a zone on a standard intrusion alarm panel. Pressing it manually and discreetly triggers an alarm, for places at risk of a hold-up such as shops, offices and homes. It is a hardwired device with a built-in tamper contact.

Key points
- Wired panic / hold-up button for any standard intrusion panel zone
- DC circuit (GLT) technology with a built-in tamper contact
- Surface or flush cable mounting; optional cover cap to prevent false presses
- 12 to 30VDC, 0.5mA max; compact 81mm round ABS housing, 70g
- IP40, indoor use; 0 to 50 degrees C
- Supplied with adhesive seal and installation note

The Bosch MW350 is an empty powder-coated metal enclosure for housing a Bosch Solution 6000 or 144 alarm control board, expansion modules, power supply and backup battery. It gives the panel a tidy, secure, professional finish for residential and commercial installations.

Key points
- Empty metal enclosure for a Bosch Solution 6000 / 144 control board
- External dimensions 385 x 260 x 90mm (W x H x D)
- Room for the control board, expansion modules, power supply and backup battery
- Powder-coated steel for a durable, corrosion-resistant finish
- Provision for a tamper switch (some variants include the switch)
- Wall mount; indoor use; supplied with a removable lid and fixings

The Bosch MW250 is a compact empty metal enclosure for housing a Bosch Solution 880, 2000 or 3000 alarm control board, modules, power supply and backup battery. It gives the panel a tidy, secure finish for residential and light commercial installations, and includes a tamper switch.

Key points
- Empty metal enclosure for a Bosch Solution 880 / 2000 / 3000 control board
- External dimensions 260 x 260 x 70mm (W x H x D)
- Room for the control board, power supply and backup battery
- Powder-coated steel for a durable, corrosion-resistant finish
- Includes a tamper switch and mounting bracket
- Wall mount; indoor use; supplied with a removable lid and screws

The Bosch BO-48C18133A is an 18 V AC power supply for Bosch Solution alarm panels and other systems that need an 18 V AC input. It takes 240 V AC mains and delivers approximately 1.33 A of AC output through pre-attached bare-wire leads, making it a straightforward replacement or spare transformer for a Solution control panel. Because it outputs AC (not DC), it must match panels designed for an 18 V AC supply.

Key points
- 18 V AC output, approximately 1.33 A
- 240 V AC mains input
- AC output (not DC) - for panels that require 18 V AC
- Pre-attached bare-wire output leads for direct termination
- Compact, for panel or enclosure mounting
- Replacement or spare transformer for Bosch Solution systems; 3-year warranty

The Hikvision DS-PDC15-EG2-WB is a wireless curtain PIR detector for AX PRO alarm systems. Its narrow 6.3 degree beam forms a thin vertical curtain of detection reaching up to 15m, ideal for guarding a window line, a doorway or a hallway without covering the whole room - so you can arm the perimeter while people move freely behind it.

At a glance
- Curtain-style PIR, narrow 6.3 degree beam up to 15m, 18 detection zones
- Digital temperature compensation, white-light filter and creep-zone protection for stable detection
- Tri-X two-way wireless on 433MHz, up to 1.2km open-air, AES-128 with frequency hopping
- One CR123A battery, up to 5 years; front and rear tamper
- Indoor wall mount (height 2.4-3.6m); app set-up; no pet immunity on this model

The Hikvision DS-PWA96-Kit-WB is a wireless AX PRO alarm starter kit built around the DS-PWA96-M-WB control panel. It is a ready-to-arm package with a motion detector, a door/window reed contact and a keyfob, and it reports over 4G, Wi-Fi or hardwired LAN with full control from the Hik-Connect app.

In this kit
- 1 × DS-PWA96-M-WB AX PRO wireless control panel (433 MHz)
- 1 × DS-PDP15P-EG2-WB wireless PIR motion detector
- 1 × DS-PDMC-EG2-WB wireless magnetic door/window contact
- 1 × DS-PKF1-WB wireless keyfob
- Reports over dual-SIM 4G, Wi-Fi and wired LAN
- Up to 96 wireless zones, 48 keyfobs and 48 tags; ~12 h battery backup

The Bosch B426-M is a Conettix Ethernet communication module that connects a Bosch Solution 2000, Solution 3000 or AMAX alarm panel to your network. It gives the panel a wired internet path so you can control the system from your phone with the free Bosch RSC+ app — arming, disarming, push notifications and device control — and it reports events securely with AES encryption. It plugs into the panel bus and connects to your router with a standard network cable.

Key points
- Adds Ethernet (IP) connectivity to Solution 2000/3000 and AMAX panels
- Enables the Bosch RSC+ app: remote arm/disarm, push notifications, device control
- Self-monitor with no monthly fee, or report to a monitoring centre
- 128 to 256-bit AES encryption, NIST FIPS-197, anti-substitution
- 10/100 Base-T, IPv4 and IPv6; Plug and Play setup
- Connects to your router with a standard Cat5 (or better) network cable
- Note: the B426-M and the older B426 use different, non-interchangeable firmware

The Bosch WE800EV2KIT is a wireless keyfob and receiver kit that adds one-button arming and disarming to a Bosch Solution 2000, 3000, 844 or 880 alarm panel. It includes a 433MHz receiver and two 4-button keyfobs, plus two onboard relays you can program to operate a garage door or gate. It is a professional add-on, not a DIY product.

What's in the box
- 1x Bosch WE800EV2 433.92MHz wireless receiver
- 2x 4-button keyfobs with sliding cover
- Mounting and connection hardware

Suits Bosch Solution 844, 880 (Non-Ultima), 2000 and 3000 panels. Stores up to 21 keyfobs and has two onboard programmable relays for external devices such as a garage door or gate.