All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Metro delivery usually takes 2–4 business days after dispatch, and regional areas may take longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
Alarm
Hikvision HiLook HA-ALARM-PIR1-AUS: 18m Wired PIR Motion Detector with 10kg Pet Immunity
The HiLook HA-ALARM-PIR1-AUS is a wired indoor PIR motion detector for intruder alarm systems — the sensor that spots someone moving through a room and tells the panel to alarm. It covers up to 18 metres across an 85.9° field of view, ignores pets up to 10 kg to cut false alarms, and uses selectable EOL resistors so it works with the HiLook AX Hybrid Pro panel and most other wired alarm panels. It is a wired detector, not a wireless one, and needs a control panel to operate.
Key points
- Passive infrared detection: up to 18 m range, 85.9° field of view
- Pet immunity up to 10 kg to reduce false alarms from small animals
- 3D optics, digital temperature compensation and creep-zone protection
- Selectable EOL resistors — compatible with most wired alarm panels, not just HiLook
- Wired connection on 9–16 VDC with reverse-polarity protection; wall or ceiling mount 1.8–2.4 m
- HiLook AX Hybrid Pro range; requires a control panel; 3-year warranty
Hikvision HiLook HA-ALARM-PIR2-AUS: 12m Dual-Tech Motion Detector with 30kg Pet Immunity
The HiLook HA-ALARM-PIR2-AUS is a wired indoor dual-technology motion detector — the high-accuracy sensor for an intruder alarm. It combines a passive infrared sensor with a 24 GHz microwave sensor, and both have to detect movement before it alarms, which sharply cuts the false alarms that catch single-technology detectors out. It covers up to 12 metres across 52 detection zones, is pet immune up to 30 kg, and uses selectable EOL resistors so it works with the HiLook AX Hybrid Pro panel and most other wired panels.
Key points
- Dual-technology: passive infrared plus 24 GHz microwave (both must trigger to alarm)
- Up to 12 m range, 85.9° field of view, 52 detection zones
- Pet immunity up to 30 kg — the highest in the HiLook wired range
- 3D Fresnel optics, digital temperature compensation, creep-zone protection, front tamper
- Normally-closed alarm output; selectable EOL resistors for most wired panels
- Wired on 9–16 VDC; wall or ceiling mount 1.8–2.4 m; requires a control panel; 3-year warranty
HiLook HA-ALARM-SIREN1 Wired Sounder – 105dB Alarm with LED Flash & IP54 Protection
The HiLook HA-ALARM-SIREN1 is a wired external sounder for intruder alarm systems — the loud, visible part that turns a triggered alarm into a deterrent. It delivers up to 105 dB of sound at 30 cm and has an independent LED flash, so an activation is both heard and seen. An IP54-rated PC+ABS shell suits indoor or sheltered outdoor mounting, and it runs from the 12 volt siren output of a wired alarm panel. It is a sounder, not a standalone alarm, so it needs a control panel to drive it.
Key points
- Up to 105 dB sound output (measured at 30 cm) for an audible deterrent
- Independent LED flash — sound and visual alert can be configured separately
- IP54 rated for indoor or sheltered external wall mounting
- Runs on 8–16 VDC (typically 12 V) from a wired alarm panel siren output
- Rugged PC+ABS shell, 140 × 134 × 33 mm; works with any compatible 12V panel
- HiLook AX Hybrid Pro range; requires a control panel (not a standalone alarm); 3-year warranty
Before you buy
What customers ask most before ordering from this range — and how we deliver.
Which kit is right for me?
Start with three questions: how many areas do you need to cover, do you want colour night vision, and do you want AI alerts that ignore cars and animals? For most homes, a 4-camera 8MP ColorVu or Full-Colour kit is the sweet spot. Not sure? Use our CCTV Advisor — answer a few questions and it recommends a kit — or email us and we'll spec it with you.
Is your Hikvision, Dahua, HiLook and TP-Link VIGI stock genuine Australian stock?
Yes, 100%. Every Hikvision, Dahua, HiLook and TP-Link VIGI product we sell is a genuine Australian-market model sourced through Australian supply chains — never grey imports. That means factory-sealed units, Australian-region firmware that works with the official apps out of the box, and a full 3-year local warranty.
How long does delivery take?
Metro delivery usually takes 2–4 business days after dispatch, and regional areas may take longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
How much is shipping?
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
What warranty do you offer?
All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
What is your return policy?
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Do you offer installation?
We can connect you with licensed installers in Sydney and Melbourne. Installation typically starts from around $200 per camera depending on cable runs and site conditions. Email sales@smarket.com.au with your address and camera count for a quote.
Alarms by Brand
Compare alarm systems across the range
Security Cameras
Add cameras alongside your alarm system
