All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Metro delivery usually takes 2–4 business days after dispatch, and regional areas may take longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
Bosch Alarm Systems
Bosch ISC-BPQ2-W12 Blue Line Gen2 Quad PIR Detector, 12 m
The Bosch ISC-BPQ2-W12 is the detector for a corridor, a stairwell or a narrow room, the shapes where an ordinary PIR either misses an intruder walking straight at it or cries wolf. It is a quad passive infrared detector: two separate sensors in one housing, each processing its own signal, over 12 m x 12 m.
What you get
- 1 × ISC-BPQ2-W12 detector in a white high-impact ABS enclosure
- 1 × hardware pack with two anchors, two screws and a cable tie, plus a literature pack
You’ll also need
- An alarm panel with a spare zone and a 24-hour tamper circuit
- A cable run from the panel carrying its supply, the alarm relay and the tamper, plus the end-of-line resistors the panel requires
- A bracket if it is not going flat on a wall or into a corner, such as the B338 ceiling mount
Bosch ISC-BPR2-WP12 Blue Line Gen2 Pet Friendly PIR Detector
The Bosch ISC-BPR2-WP12 is the pet-friendly version of Bosch's everyday hardwired motion detector: 12 m x 12 m of coverage from a dense 77 zone pattern, with immunity for one or two pets up to 20 kg that the installer can switch on or off.
What you get
- 1 × ISC-BPR2-WP12 detector, white, in a high-impact ABS enclosure
You'll also need
- An alarm panel with a spare zone and a 24-hour tamper circuit
- A cable run from the panel carrying its supply, the alarm relay and the tamper, plus the end-of-line resistors the panel requires
- A bracket if it is not going flat on a wall or into a corner, such as the B338 ceiling mount
Bosch ISC-BPR2-W12 Blue Line Gen2 PIR Detector, 12 m x 12 m
The Bosch ISC-BPR2-W12 is the everyday hardwired motion detector for a house or small business: 12 m x 12 m of wall-to-wall coverage from a dense 77 zone pattern, with First Step Processing setting the sensitivity so the installer does not have to.
What you get
- 1 × ISC-BPR2-W12 detector in a white high-impact ABS enclosure with a bubble level and lift-gate terminal blocks
- 1 × hardware pack with two anchors, two screws and a cable tie, plus an installation guide
You'll also need
- An alarm panel with a spare zone and a 24-hour tamper circuit
- A cable run from the panel carrying its supply, the alarm relay and the tamper, plus the end-of-line resistors the panel requires
- A bracket if it is not going flat on a wall or into a corner, such as the B338 ceiling mount
Bosch B810 RADION Wireless Receiver for Solution 3000/4000
The Bosch B810 is a 433.42 MHz RADION wireless receiver that connects compatible detectors, contacts, keyfobs, panic buttons and repeaters to a supported Bosch control panel over the SDI2 bus, with one receiver used per system.
What you get
- B810 wireless receiver, hardware pack and installation guide
You'll also need
- A compatible Solution panel: the ICP-SOL3-P or ICP-SOL4-P. On the Solution 4000, a B810 and a WE800EV2 cannot be fitted together
- RADION devices to receive: the RFDL-11 TriTech and RFPR-12 PIR detectors, RFDW-SM and RFDW-RM door and window contacts, the RFUN universal transmitter, RFKF-FBS keyfob and RFGB glass break
Bosch B338 Universal Ceiling‑mount Bracket
The Bosch B338 is a swiveling universal bracket that lets you ceiling-mount a Bosch motion detector and aim it exactly where you need it. The plastic surface-mount bracket gives a vertical swivel range of +7° to -16° and a horizontal range of ±45°, so you can point a wall-pattern detector down into a room from the ceiling. It suits many Bosch detector types, including the Blue Line range.
Key points
- Universal ceiling-mount bracket for many Bosch detectors
- Vertical swivel +7° to -16°, horizontal swivel ±45° for precise aiming
- Plastic, surface-mount, swiveling design
- Lets a wall-coverage detector be mounted centrally on the ceiling
- Note: pet immunity can no longer be assured once a detector is ceiling-mounted on this bracket
Bosch 6000 Series Alarm PCB Kit with Smart Keypad
The Bosch Solution 6000 PCB kit with the CP736B smart keypad is the bare foundation for a custom professional alarm. It includes the Solution 6000 control panel board, a colour graphic keypad with smart-card reader, an 18V transformer, a 12V 7Ah backup battery and a metal enclosure with tamper, so your installer can build the system from the ground up with the detectors, sirens and modules the site needs.
What's in the box
- Bosch Solution 6000 control panel (16 zones on board, expandable to 144 wired or wireless)
- Bosch CP736B 3.5-inch colour graphic keypad with integrated smart-card reader (not a touchscreen)
- 18V plug-pack transformer and 12V 7Ah backup battery
- Metal enclosure with tamper switch and a manual
- No detectors, no sirens and no IP module included (add to suit the site)
Bosch 6000 Series Alarm Kit with Smart WIFI Keypad, 3 x Bosch Gen2 PIRS and Accessories
The Bosch Solution 6000 kit with a CP737B Wi-Fi keypad and three PIRs is a commercial-grade, app-ready wired alarm for larger Australian homes and businesses. It pairs the powerful Solution 6000 panel with a 3.5-inch Wi-Fi smart-prox keypad and three Blue Line Gen2 PIR detectors, so it covers the main areas and connects to the iFob app over Wi-Fi straight after install.
What's in the box
- Bosch Solution 6000 control panel (up to 144 zones across up to 8 areas)
- Bosch CP737B Wi-Fi smart-prox keypad (3.5-inch colour)
- 3x Blue Line Gen2 PIR motion detectors (BPR2-W12, 12m)
- 18V transformer, 12V 7Ah battery, internal 120dB piezo siren and external siren with strobe
- Metal enclosure with tamper, 8x 3k3 + 8x 6k8 resistors and a manual
Bosch 6000 Series Alarm Kit with Smart Wifi Keypad, 2 x Bosch Gen2 Wireless PIRS and 2 x Premium Key Fobs
The Bosch Solution 6000 kit with a CP737B Wi-Fi keypad, two wireless PIRs and two keyfobs is a commercial-grade, app-ready alarm for larger Australian homes and businesses. It pairs the powerful Solution 6000 panel with a 3.5-inch Wi-Fi touchscreen keypad, two wireless PIR detectors, the RFRC-STR2 wireless receiver and two premium keyfobs, so the household can arm and disarm from a remote and from the iFob app.
What's in the box
- Bosch Solution 6000 control panel (up to 144 zones across up to 8 areas)
- Bosch CP737B Wi-Fi smart-prox keypad (3.5-inch colour)
- 2x Blue Line Gen2 wireless PIR motion detectors (battery powered)
- Bosch RFRC-STR2 wireless receiver and 2x premium 4-button keyfobs
- 18V transformer, 12V 7Ah battery, internal 120dB piezo siren and external siren with strobe
- Metal enclosure with tamper, 8x 3k3 + 8x 6k8 resistors and a manual
Before you buy
What customers ask most before ordering from this range — and how we deliver.
Which kit is right for me?
Start with three questions: how many areas do you need to cover, do you want colour night vision, and do you want AI alerts that ignore cars and animals? For most homes, a 4-camera 8MP ColorVu or Full-Colour kit is the sweet spot. Not sure? Use our CCTV Advisor — answer a few questions and it recommends a kit — or email us and we'll spec it with you.
Is your Hikvision, Dahua, HiLook and TP-Link VIGI stock genuine Australian stock?
Yes, 100%. Every Hikvision, Dahua, HiLook and TP-Link VIGI product we sell is a genuine Australian-market model sourced through Australian supply chains — never grey imports. That means factory-sealed units, Australian-region firmware that works with the official apps out of the box, and a full 3-year local warranty.
How long does delivery take?
Metro delivery usually takes 2–4 business days after dispatch, and regional areas may take longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
How much is shipping?
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
What warranty do you offer?
All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
What is your return policy?
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Do you offer installation?
We can connect you with licensed installers in Sydney and Melbourne. Installation typically starts from around $200 per camera depending on cable runs and site conditions. Email sales@smarket.com.au with your address and camera count for a quote.
Security Cameras
Add cameras alongside your alarm system
