All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Metro delivery usually takes 2–4 business days after dispatch, and regional areas may take longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
Bosch Alarm Systems
Bosch BOSPR116B Mullion Prox Reader Ext White Plastic
The Bosch PR116B is an external smart-card reader in a white mullion housing for the Bosch Solution 6000 alarm panel. Rated IP66 and made from vandal-resistant ASA plastic, it lets users arm, disarm and control a door by presenting a MiFare card or token at an entry point.
Key points
- External, IP66 weather-resistant, white mullion housing
- MiFare 40-bit smart-card reader (PR301B, PR350B, PR365B tokens)
- Alarm and access control on the Bosch Solution 6000 (also 16i and 144)
- Encrypted RS485 LAN with two-way authentication; occupies one keypad position
- Red, green and blue LEDs for area and door-lock status
- 10 to 14.5VDC, 100mA max; 500mA lock output and egress input
Bosch BOSPR115B reader, smartcard ext black slim keypad based
The Bosch PR115B is an external smart-card reader in a slimline black housing for the Bosch Solution 6000 alarm panel. Rated IP66 and made from vandal-resistant ASA plastic, it lets users arm, disarm and control a door by presenting a MiFare card or token at an entry point.
Key points
- External, IP66 weather-resistant, slimline black housing
- MiFare 40-bit smart-card reader (PR301B, PR350B, PR365B tokens)
- Alarm and access control on the Bosch Solution 6000 (also 16i and 144)
- Encrypted RS485 LAN; occupies one keypad position
- Red, green and blue LEDs for area and door-lock status
- 10 to 14.5VDC, 100mA max; 500mA lock output and egress input
Bosch MW350 Metal Surface Mount Enclosure, Solution 6000
The Bosch MW350 is a metal surface-mount enclosure for the Solution 6000 series: a white box with a screwed cover, 260 mm high and 385 mm wide, for mounting a panel where there is no cavity to recess it into.
What you get
- 1 × MW350 metal enclosure, white, with a screwed cover
You'll also need
- The panel board and modules that will go inside it, such as the CC610P
- A plug pack, a battery and a tamper switch, none of which are part of the enclosure
Bosch BOSISC-PB1-100 panic button
The Bosch ISC-PB1-100 (ND 100 GLT) is a wired panic button that connects to a zone on a standard intrusion alarm panel. Pressing it manually and discreetly triggers an alarm, for places at risk of a hold-up such as shops, offices and homes. It is a hardwired device with a built-in tamper contact.
Key points
- Wired panic / hold-up button for any standard intrusion panel zone
- DC circuit (GLT) technology with a built-in tamper contact
- Surface or flush cable mounting; optional cover cap to prevent false presses
- 12 to 30VDC, 0.5mA max; compact 81mm round ABS housing, 70g
- IP40, indoor use; 0 to 50 degrees C
- Supplied with adhesive seal and installation note
Bosch BO-48C18133A Power Supply 18V AC – 18 V AC Power Supply (Approx. 1.33 A)
The Bosch BO-48C18133A is an 18 V AC power supply for Bosch Solution alarm panels and other systems that need an 18 V AC input. It takes 240 V AC mains and delivers approximately 1.33 A of AC output through pre-attached bare-wire leads, making it a straightforward replacement or spare transformer for a Solution control panel. Because it outputs AC (not DC), it must match panels designed for an 18 V AC supply.
Key points
- 18 V AC output, approximately 1.33 A
- 240 V AC mains input
- AC output (not DC) - for panels that require 18 V AC
- Pre-attached bare-wire output leads for direct termination
- Compact, for panel or enclosure mounting
- Replacement or spare transformer for Bosch Solution systems; 3-year warranty
Bosch ISC-BDL2-WP12G Pet Friendly TriTech Detector, 12 m
The Bosch ISC-BDL2-WP12G is the detector for a house with a big dog: passive infrared and 10.525 GHz microwave over 12 m x 12 m, with pet immunity for one or two pets up to 45 kg that the installer can switch on or off.
What you get
- 1 × ISC-BDL2-WP12G detector in a white high-impact ABS enclosure
- 1 × hardware pack with two anchors, two screws and a cable tie, plus an installation guide
You’ll also need
- An alarm panel with a spare zone and a 24-hour tamper circuit
- A cable run from the panel carrying its supply, the alarm relay and the tamper, plus the end-of-line resistors the panel requires
- A bracket if it is not going flat on a wall or into a corner, such as the B338 ceiling mount
Bosch Blue Line Tritech PIR Detector 12m Pet Friendly up to 45KG BDL2-WP12G
The Bosch BDL2-WP12G is a Blue Line Gen2 TriTech motion detector that combines passive infrared (PIR) with microwave detection, so both technologies have to agree before it raises an alarm. That dual-technology approach cuts false alarms, and a selectable pet-immunity mode lets it ignore one or two pets up to 45 kg while still catching intruders. It covers 12 m x 12 m wall-to-wall and is a wired detector for a hardwired Bosch alarm panel.
Key points
- TriTech detection: PIR plus microwave (10.525 GHz) must both agree to alarm
- Selectable pet immunity for one or two pets up to 45 kg (100 lb)
- 12 m x 12 m (40 ft) wall-to-wall coverage, 94° angle
- First Step Processing and dynamic temperature compensation
- Wired detector: normally-closed relay alarm output plus tamper
- Mounting height 2.2 m to 2.75 m, no field adjustments; EN50131 Grade 2
- Note: pet immunity is not assured if the detector is ceiling-mounted
Bosch RFDL-11 RADION Wireless TriTech Detector 11 m Pet
The Bosch RFDL-11 is a RADION wireless TriTech motion detector for homes and offices that want a Bosch alarm without cabling every room: passive infrared and microwave Doppler radar in one battery-powered unit, pet immune to a 45 kg dog, with 11 m x 11 m coverage.
What you get
- 1 × RFDL-11 RADION TriTech wireless motion detector
You'll also need
- A RADION receiver at the panel, such as the B810 wireless SDI2 bus interface or the RFRC-STR2 receiver ST
- Four AA alkaline batteries
- A wall or corner position between 2 m and 2.4 m high; the B338 universal bracket is the ceiling option
- An installer session at the panel to learn the detector in as an RF zone
Before you buy
What customers ask most before ordering from this range — and how we deliver.
Which kit is right for me?
Start with three questions: how many areas do you need to cover, do you want colour night vision, and do you want AI alerts that ignore cars and animals? For most homes, a 4-camera 8MP ColorVu or Full-Colour kit is the sweet spot. Not sure? Use our CCTV Advisor — answer a few questions and it recommends a kit — or email us and we'll spec it with you.
Is your Hikvision, Dahua, HiLook and TP-Link VIGI stock genuine Australian stock?
Yes, 100%. Every Hikvision, Dahua, HiLook and TP-Link VIGI product we sell is a genuine Australian-market model sourced through Australian supply chains — never grey imports. That means factory-sealed units, Australian-region firmware that works with the official apps out of the box, and a full 3-year local warranty.
How long does delivery take?
Metro delivery usually takes 2–4 business days after dispatch, and regional areas may take longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
How much is shipping?
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
What warranty do you offer?
All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
What is your return policy?
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Do you offer installation?
We can connect you with licensed installers in Sydney and Melbourne. Installation typically starts from around $200 per camera depending on cable runs and site conditions. Email sales@smarket.com.au with your address and camera count for a quote.
Security Cameras
Add cameras alongside your alarm system
