All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Metro delivery usually takes 2–4 business days after dispatch, and regional areas may take longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
Bosch Alarm Systems
Bosch DS1101i Glass Break Detector, 7.6 m Sound Analysis
The Bosch DS1101i catches the break-in at the window rather than after it: microprocessor sound analysis listens for the specific frequencies of breaking glass, up to 7.6 m from the glass being protected, and reports on a Form C relay to a hardwired alarm panel.
What you get
- 1 × DS1101i glass break detector in a high-impact ABS enclosure for ceiling or wall mounting
You'll also need
- An alarm panel with a spare zone and a tamper input, supplying 6 VDC to 15 VDC. The ICP-SOL3-P and CC610P are the panels sold here; check their zone inputs against the figures below
- A cable run from the panel carrying its 6 VDC to 15 VDC supply, the alarm relay and the tamper, plus the end-of-line resistors the panel requires
- Motion detectors as well, such as the ISC-BPR2-WP12, because a glass break detector is one component of a perimeter system rather than a system on its own
Bosch DS9370 360° Ceiling TriTech Detector 14.0 m
The Bosch DS9370 is a ceiling-mounted TriTech motion detector for warehouses, showrooms and open-plan offices where one central point has to watch a full 360° area, combining passive infrared with microwave Doppler radar.
What you get
- DS9370 Classic Line TriTech ceiling detector in white, with its hinged mounting base and modular chassis
- Masking kit with two 120° and two 90° masks for blanking out unwanted areas
You'll also need
- A hardwired alarm control panel whose zone input accepts a Form C relay and a normally closed tamper loop, with a 9 VDC to 15 VDC supply
- A cable run from the panel to the ceiling position carrying power, the alarm relay and the tamper loop
- A ceiling position between 2.4 m and 6.1 m high, or a standard 10.2 cm (3.5 in.) octagonal electrical box
Bosch CP737B WIFI Graphic Keypad for Bosch 6000
The Bosch CP737B is a 3.5-inch colour graphic keypad with built-in WiFi and a 40-bit MiFare smart-card reader for the Bosch Solution 6000 and 6000-IP alarm panels. Its colour pixel display shows the system status in plain text and colour, and the built-in WiFi connects to the MyAlarm and iFob Control apps for control from a phone.
Key points
- 3.5-inch colour graphic display with LED backlight
- Built-in 802.11 b/g/n WiFi for the MyAlarm and iFob Control apps
- Built-in 40-bit MiFare smart-card reader (arm/disarm by card or token)
- For Bosch Vision-X, Vision-XIP, Solution 6000 and Solution 6000-IP
- Encrypted RS485 LAN; +12VDC, 110mA max; white housing
- Colour-coded illuminated keys and a programmable sounder
Bosch CP155B External Keypad Combo Reader for Bosch 6000
The Bosch CP155B is an external keypad with a built-in smart-prox reader for the Bosch Solution 6000 alarm panel. Rated IP65 and built from UV-resistant plastic, it suits an entry door, gate or carport where you need to arm, disarm and control access from outside.
Key points
- External, IP65 weather-rated, UV-resistant housing
- Built-in smart-prox reader (PR301, PR350, PR365, PR370 cards/tokens)
- Backlit numeric keypad with red, green and blue status LEDs
- For Bosch Solution 6000 / 144 (alarm and access control)
- Encrypted RS485 LAN with front and rear tamper
- 10VDC, 100mA max; occupies one keypad position
Bosch CM751B Conettix IP Ethernet Module for Solution 6000
The Bosch CM751B is the plug-on Ethernet module for a Solution 6000 owner who wants the panel on the network instead of a phone line: monitored reporting in Conettix or CSV-IP format with 128 bit AES encryption, remote programming over IP, and the wired path for the MyAlarm app.
What you get
- 1 × CM751B Conettix IP Ethernet module with three PCB standoffs and the HW750 riser kit
You'll also need
- A Solution 6000 control panel, sold here as the CC610P panel PCB or in the CC610GWP panel and keypad kit
- A network cable from the panel cabinet to the router or switch
- A MyAlarm subscription if app control is wanted; it is a paid service that Bosch does not run
Bosch CM710B 4 x Form C Relay Output Expansion Module
The Bosch CM710B is the module for a Solution 6000 or Solution 16i owner who has run out of outputs: it adds four Form C relay outputs, rated 24VDC at 2A MAX, on a PCB that sits in the panel cabinet or in its own enclosure at the far end of the LAN.
What you get
- 1 × CM710B output expansion module PCB with four Form C relay outputs, status LED, separate tamper input and a service code pad connection
You'll also need
Bosch CM704B 8/16 Zone Expansion Module for Solution 6000
The Bosch CM704B is the zone expansion module for a Solution 6000 system that has run out of detector inputs: a PCB on the panel's 4 wire LAN that adds 8 physical zone inputs, giving 8 or 16 zones depending on the end-of-line configuration.
What you get
- 1 × CM704B 8/16 zone expansion module PCB with status and zone power LEDs, a service code pad connection and a separate tamper input
You'll also need
- A Solution 6000 panel: the CC610P board, the CC610GWP kit or the CC610GWF-2 kit
- One free module space in the panel cabinet or a separate enclosure, plus 4 wire LAN cable to reach it
- Detectors for the new zones, such as these sold here: the ISC-BPR2-WP12 PIR or the DS1101i glass-break detector
Bosch CC610P Solution 6000 Control Panel PCB only
The Bosch CC610P is the control panel PCB for the Bosch Solution 6000 alarm and access control system. It is the board (PCB only) at the heart of a Solution 6000, supporting 16 on-board zones expandable to 144 wired or wireless, eight areas and integrated access control for up to 16 doors.
Key points
- Solution 6000 control panel, supplied as the PCB only
- 16 on-board zones, expandable to 144 (wired or wireless)
- Partitionable into 8 areas; up to 990 users (PIN, token, keyfob, fingerprint)
- 5 on-board outputs, expandable to 37; access control for up to 16 doors
- Up to 16 keypads or readers; reporting by CID, SIA, IP, voice and SMS
- 16-18V AC supply; needs a keypad, enclosure, transformer, battery and detectors to make a system
Before you buy
What customers ask most before ordering from this range — and how we deliver.
Which kit is right for me?
Start with three questions: how many areas do you need to cover, do you want colour night vision, and do you want AI alerts that ignore cars and animals? For most homes, a 4-camera 8MP ColorVu or Full-Colour kit is the sweet spot. Not sure? Use our CCTV Advisor — answer a few questions and it recommends a kit — or email us and we'll spec it with you.
Is your Hikvision, Dahua, HiLook and TP-Link VIGI stock genuine Australian stock?
Yes, 100%. Every Hikvision, Dahua, HiLook and TP-Link VIGI product we sell is a genuine Australian-market model sourced through Australian supply chains — never grey imports. That means factory-sealed units, Australian-region firmware that works with the official apps out of the box, and a full 3-year local warranty.
How long does delivery take?
Metro delivery usually takes 2–4 business days after dispatch, and regional areas may take longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
How much is shipping?
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
What warranty do you offer?
All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
What is your return policy?
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Do you offer installation?
We can connect you with licensed installers in Sydney and Melbourne. Installation typically starts from around $200 per camera depending on cable runs and site conditions. Email sales@smarket.com.au with your address and camera count for a quote.
Security Cameras
Add cameras alongside your alarm system
