All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Metro delivery usually takes 2–4 business days after dispatch, and regional areas may take longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
Alarm
Hikvision DS-PM1-O4H-H AX Hybrid Pro 4-Way Output Module to suit Hardwired Alarm Controller
The Hikvision DS-PM1-O4H-H is a wired 4-way power output module for AX Hybrid Pro hardwired alarm controllers. It gives the panel four high-current relays that can switch mains-powered devices - sirens, strobes, lighting circuits, gates and shutters - on command over the Speed-X bus, turning an alarm event into real-world action.
At a glance
- Four onboard power relays, each rated to switch up to 16A
- Connects to a 100-240 VAC source and opens/closes circuits on command
- Controlled by the AX Hybrid Pro panel over the Speed-X bus
- Cascade support: 1 uplink and 1 downlink Speed-X port for more expanders
- Front and rear tamper, plastic enclosure, mains wiring by a licensed electrician
Hikvision DS-PM1-I1-WB AX PRO Wireless Input Transmitter | Convert Wired to Wireless
The Hikvision DS-PM1-I1-WB is a wireless input transmitter for AX PRO alarm systems. It bridges one existing wired detector, contact or alarm device into the AX PRO wireless system, so you can reuse proven wired hardware on a modern wireless panel without running new cable back to the hub.
At a glance
- Converts one wired alarm input (PIR, reed, vibration, contact) into a wireless AX PRO zone
- One alarm input, one tamper input, one programmable PGM output, plus a 3.3V output for low-current sensors
- Tri-X two-way wireless on 433MHz (2GFSK), up to 1300m open-air, AES-128
- Three CR123 batteries, up to 5 years; built-in tamper
- Compact module fits inside a wireless-ready detector or beside the wired device
Hikvision AX PRO Series DS-PDEBP2-EG2-WB Portable Wireless Dual Emergency Button
The Hikvision DS-PDEBP2-EG2-WB is a portable wireless dual panic button for AX PRO alarm systems. Pressing both buttons together sends an immediate distress alert to the hub and on to carers' phones through Hik-Connect, while the two-button design helps prevent the accidental presses that catch out single-button buttons in a pocket or bag.
At a glance
- Two-button press sends a wireless emergency / panic alert to an AX PRO hub
- Dual-button design plus accidental-press protection cuts false alerts
- Tri-X two-way wireless, up to 800m open-air, 433MHz, AES-128 with frequency hopping
- Wear on a lanyard or the optional wristband; red / green status LED
- One CR2032 battery, up to 3 years; IP54 splash resistant for everyday use
Hikvision DS-PDSMK-4BAR AX PRO WIRED Smoke Detector
The Hikvision DS-PDSMK-4BAR is a wired 4-wire photoelectric smoke detector that adds early fire warning to a 12 VDC intrusion or fire alarm system. When smoke enters its sensing chamber, it raises a built-in sounder and signals the connected alarm panel, so an emerging fire is flagged locally and remotely.
At a glance
- Photoelectric smoke sensing for early, low-nuisance fire detection
- 4-wire conventional connection to 12 VDC alarm panels
- Built-in high-output sounder, approximately 85dB at 3m
- Normally Open (NO) or Normally Closed (NC) relay output
- Dual red LEDs with 360-degree visibility, low-profile ceiling mount
Hikvision AX PRO Duress Alarm Security Kit – Control Panel, Panic Buttons & Sirens
This Hikvision AX PRO duress kit is a panic alarm for personal safety: pressing an emergency button raises an audible alarm on the indoor and outdoor sirens and, at the same time, sends a phone call and app alert to the people you nominate. It is built on the DS-PWA64-M-WB hub with portable and wall-mounted panic buttons.
What's in the kit
- 1 x DS-PWA64-M-WB AX PRO wireless alarm hub (64 zones)
- 1 x DS-PSG-WI-433 wireless indoor siren
- 1 x DS-PS1-E-WB wireless outdoor sounder
- 1 x DS-PDEBP1-EG2-WB portable wireless emergency button
- 1 x DS-PDEB1-EG2-WB wall-mounted wireless emergency button
- 1 x DS-PDB-IN-Wristband to wear the portable button
- Wi-Fi, wired LAN and 3G/4G SIM reporting paths
Hikvision DS-PDSK-P AX Hybrid Series Wired Shock Detector
The Hikvision DS-PDSK-P is a wired shock detector for AX Hybrid Pro alarm systems. Fitted directly to a door, window, wall or safe, it senses the vibration of drilling, levering or hammering and raises the alarm during a forced-entry attempt - before an intruder actually gets inside.
At a glance
- Shock sensor detects forced-entry vibration on the protected surface
- Adjustable sensitivity via potentiometer, with gross-attack override
- Advanced digital background-noise filter to reduce false alarms
- Wired NC alarm output, front tamper, blue LED indicator
- 9-16 VDC (typically 12 VDC), 30mA, indoor use
Hikvision AX PRO Duress Silent Alarm Security Kit – Control Panel, Panic Buttons
This Hikvision AX PRO duress kit is a silent personal-safety alarm: pressing a panic button sends a phone call and app alert to the people you nominate without sounding a siren at the property, so help can be called discreetly. It is built on the DS-PWA64-M-WB hub with portable and wall-mounted emergency buttons.
What's in the kit
- 1 x DS-PWA64-M-WB AX PRO wireless alarm hub (64 zones)
- 1 x DS-PDEBP1-EG2-WB portable wireless emergency button
- 1 x DS-PDEB1-EG2-WB wall-mounted wireless emergency button
- 1 x DS-PDB-IN-Wristband to wear the portable button
- Silent alerts: phone call and app push, no on-site siren
- Wi-Fi, wired LAN and 3G/4G SIM reporting paths
Hikvision DS-PDCM15PF-IR Ax Pro Wireless Outdoor Camera to suit Tri-Tech Detector, IP66
The Hikvision DS-PDCM15PF-IR is a camera module for the AX PRO wireless alarm system. It is not a standalone surveillance camera - it clips onto the AX PRO wireless outdoor Tri-Tech detector and adds visual alarm verification, capturing a short burst of photos when the detector triggers and sending them to the Hik-Connect app and the monitoring centre so a real intrusion can be told apart from a false alarm. Built-in infrared up to 15 m gives images at night, and the module is IP66 for outdoor use.
Key points
- Adds photo verification to the AX PRO wireless outdoor Tri-Tech detector
- Captures a burst of JPEG snapshots on alarm (up to 640 x 480)
- Sends images to Hik-Connect and the monitoring centre (ARC)
- 2 mm lens, 137° horizontal field; colour by day, infrared up to 15 m at night
- IP66 outdoor rated; powered from the detector (3 VDC)
- Requires the AX PRO hub and a compatible wireless Tri-Tech detector
- Not a continuous-video camera and does not connect to an NVR
Before you buy
What customers ask most before ordering from this range — and how we deliver.
Which kit is right for me?
Start with three questions: how many areas do you need to cover, do you want colour night vision, and do you want AI alerts that ignore cars and animals? For most homes, a 4-camera 8MP ColorVu or Full-Colour kit is the sweet spot. Not sure? Use our CCTV Advisor — answer a few questions and it recommends a kit — or email us and we'll spec it with you.
Is your Hikvision, Dahua, HiLook and TP-Link VIGI stock genuine Australian stock?
Yes, 100%. Every Hikvision, Dahua, HiLook and TP-Link VIGI product we sell is a genuine Australian-market model sourced through Australian supply chains — never grey imports. That means factory-sealed units, Australian-region firmware that works with the official apps out of the box, and a full 3-year local warranty.
How long does delivery take?
Metro delivery usually takes 2–4 business days after dispatch, and regional areas may take longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
How much is shipping?
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
What warranty do you offer?
All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
What is your return policy?
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Do you offer installation?
We can connect you with licensed installers in Sydney and Melbourne. Installation typically starts from around $200 per camera depending on cable runs and site conditions. Email sales@smarket.com.au with your address and camera count for a quote.
Alarms by Brand
Compare alarm systems across the range
Security Cameras
Add cameras alongside your alarm system
