Alarm

The X2-REED-301 is a compact, heavy-duty metal reed switch for monitoring the open or closed state of doors and windows in demanding spots. It is a wired, normally-closed switch with a 480 mm armoured cable and a 30 mm operating gap, which makes it well suited to roller doors, fire doors and roof hatches where a small but tough sensor is needed. It wires into any hardwired alarm zone.

Key points
- Mini heavy-duty metal reed switch, surface mount
- Wired, normally-closed (NC) contact for any hardwired alarm zone
- 30 mm operating gap; 480 mm armoured cable
- Rated 100 V DC/AC, 0.5 A, 10 W
- Silver zinc alloy body; -20°C to 80°C; rated for 100,000+ operations
- CCC / CE / FCC / RoHS

The Hikvision DS-PDD12P-EG2 is a wired dual-technology indoor detector for AX Hybrid Pro and other hardwired alarm panels. A passive infrared (PIR) sensor and a 24GHz microwave sensor work together and only alarm when both agree, cutting false alarms while still catching movement from the first step.

At a glance
- Wired dual-tech PIR + 24GHz microwave, 12m range / 85.9° / 52 detection zones
- Up to 30kg pet immunity with creep-zone protection and digital temperature compensation
- Normally-closed alarm output with selectable EOL resistors for alarm and tamper
- 9-16VDC wide-voltage input with reverse-polarity protection; front tamper
- Indoor wall mount 1.8-2.4m; optional wall and ceiling brackets

The Hikvision DS-PDCL12-EG2-WB is a wireless 360-degree ceiling PIR detector for the AX PRO alarm system. Mounted overhead, its circular lens covers a whole room out to 12 metres with no blind corners. It uses Tri-X two-way wireless to the hub, runs up to five years on one battery, and is for indoor ceiling mounting.

At a glance
- 360-degree PIR coverage, 12m range, 172 detection zones
- Tri-X two-way wireless (433MHz, AES-128, frequency hopping), up to 1km open-air
- Battery powered (1 x CR123A), up to 5 years standby
- Indoor ceiling mount, 2.4m to 4m mounting height
- Front and rear tamper protection; configured in the Hik-Connect app

The Hikvision DS-PM1-O1L-WB is a wireless relay output module for Hikvision AX PRO alarm systems. It lets the alarm switch a low-voltage circuit - by an alarm event, a schedule, a fault, or manually from the Hik-Connect app - so you can automate devices such as a gate, a light or an indicator without running a wired output back to the hub.

Key points
- One NO/NC relay output, 0-36 VDC, up to 5 A
- Triggered by alarm, manual app control, schedule or fault
- 433 MHz two-way wireless with AES-128 encryption, up to 800 m
- Flexible DC 7-24 V power input
- Three status LEDs for register/signal, power and relay state
- Compact wall-mount module, 38 x 25 x 18 mm

This Hikvision AX PRO wireless alarm kit is a complete intrusion starter system built on the DS-PWA96-M-WB hub, with a keypad, three PIR motion detectors and both an indoor and an outdoor siren, all communicating wirelessly and managed from the Hik-Connect app.

What's in the kit
- 1 x DS-PWA96-M-WB AX PRO wireless alarm hub (96 zones)
- 1 x DS-PK1-E-WB wireless PIN keypad
- 3 x DS-PDP15P-EG2-WB wireless PIR detectors (15 m, 30 kg pet immunity)
- 1 x DS-PS1-E-WB wireless outdoor sounder
- 1 x DS-PS1-I-WB wireless indoor sounder
- Wi-Fi, wired LAN and 3G/4G SIM reporting paths
- Tri-X two-way wireless with AES-128 encryption

The Hikvision DS-PDBG8-EG2-WB is an AX PRO wireless glass-break detector. Its omni-directional acoustic sensor listens for the two-stage sound of breaking glass - the impact and then the falling shards - and alarms the moment a window or glass door is smashed, before an intruder is even inside.

At a glance
- Acoustic glass-break sensor, 8m range across 120°, adjustable 2/4/6/8m sensitivity
- Detects float, plate, tempered, wired, laminated leaded and double-glazed glass (2.4-6.4mm)
- Built-in alarm input adds 2 wired zones (NC / NO / impulse count)
- Tri-X two-way wireless to an AX PRO hub, up to 1km open-air, AES-128 with frequency hopping
- Two CR123A batteries, up to 5 years standby; front and rear tamper protection; indoor wall or ceiling mount

The Hikvision DS-PDP18-EG2 is a wired indoor PIR motion detector from the AX Hybrid range, giving 18 metres of volumetric coverage from a slim, unobtrusive housing. It uses a dual-element infrared sensor and a 3D Fresnel lens to detect a moving intruder accurately while ignoring everyday nuisances, and its selectable end-of-line resistors let it wire into almost any hardwired or hybrid alarm panel.

Key points
- 18 m volumetric coverage at an 85.9° detection angle
- Dual-element PIR sensor with 3D Fresnel lens optics
- Creep-zone protection covers the blind spot directly below the unit
- Sealed optical chamber resists insects and false triggers
- Selectable EOL resistors (1K/2K2/4K7/5K6/8K2) suit most panels
- 9-16 VDC wired power with reverse-polarity protection
- Optional pet mask for immunity up to 10 kg

The Hikvision DS-PDEB1-EG2-WB is a wireless emergency (panic) button for Hikvision AX PRO alarm systems. A single press raises an immediate alarm for medical or security help, making it ideal beside a bed, under a desk or by a door. It links to the AX PRO hub over encrypted Tri-X wireless and runs for years on one battery.

Key points
- One-press emergency (panic / medical) alarm to the AX PRO system
- Tri-X two-way 433 MHz wireless with AES-128 encryption
- Up to 800 m range in free space; frequency hopping
- Front and rear tamper protection
- Up to 3 years' battery life (1 x CR2450)
- Indoor wall/surface mount; green keymat for medical use