All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Metro delivery usually takes 2–4 business days after dispatch, and regional areas may take longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
Alarm
Hikvision DS-PM2-S(AU) AX Hybrid Pro Series, Wired 3G/4G Communication Module
The Hikvision DS-PMA is a 3G/4G communication module for Hikvision AX Hybrid Pro hardwired alarm panels. It plugs into the panel and adds a cellular reporting path, so alarms and notifications can be sent over the mobile network - ideal where there is no phone line, or as a backup to a wired internet connection.
At a glance
- Adds 3G/4G cellular reporting to AX Hybrid Pro hardwired panels
- SIM card slot - a suitable SIM and mobile coverage are required
- Plug-in module design for a neat install inside the panel
- Use as a primary or backup reporting path
- Communication accessory only - panel and devices ordered separately
Hikvision DS-PKA-WLM-433 Wireless keypad for Axiom Alarm
The Hikvision DS-PKA-WLM-433 is a wireless touch keypad for the Hikvision Axiom wireless alarm hub. Its full touchscreen, LED backlight and built-in IC card reader give users a clean, modern way to arm, disarm and check the system - by code or with a simple card swipe - without running any cabling.
At a glance
- Full touchscreen keypad with LED backlight for the Axiom / wireless AX hub
- Built-in IC card reader for arm and disarm by card swipe, plus patrol card
- 10 numeric and 6 function keys (fire, away/stay arm, disarm, delete, confirm)
- 433MHz two-way wireless, up to 800m open-air range
- 4 x AA batteries up to 3 years, front and rear tamper, indoor
Hikvision DS-PDPC12P-EG2 Wired PIRCAM detector
The Hikvision DS-PDPC12P-EG2 is a wired PIRCAM detector for AX Hybrid Pro alarm systems. It pairs passive infrared motion detection with a built-in camera that captures JPEG snapshots when the alarm triggers, so you or a monitoring centre can confirm what set it off - turning a bare motion alert into a verified event.
At a glance
- PIR motion + built-in camera for image verification (JPEG snapshots on alarm)
- 12m range / 85.9° / 52 detection zones; up to 30kg pet immunity
- 12m infrared fill light with polarising IR lens for clearer low-light images
- Speed-X wired bus to the panel (up to 1km), AES-128 encrypted; 9-16VDC
- Front and rear tamper; indoor wall mount 1.8-2.4m; Hik-Connect app set-up
Tactical Power Supply, 14.3V DC, 2.5A, Plug Pack, Required for Hikvision Hybrid Alarm
The Tactical TP-TP14.3-2.5APP is the plug-pack power supply that runs a Hikvision AX Hybrid Pro alarm panel. It delivers a regulated 14.3V DC at 2.5A from a standard wall socket, providing the working power the DS-PHA64 control panel needs - the correct, specified replacement or spare adapter for these wired Hikvision alarm systems.
At a glance
- 14.3V DC, 2.5A plug-pack power supply (up to 35.75W)
- Required to power the Hikvision AX Hybrid Pro DS-PHA64 panel
- Wide 100-240V AC input, wall-mounted compact design
- Correct specified spare or replacement adapter
- Power supply only - panel and backup battery are separate
Hikvision DS-PT1 Wireless Mifare Tag Reader
The Hikvision DS-PT1-WE is a wireless Mifare tag reader for Hikvision AX PRO alarm systems, operating on the 868MHz band. Mount it by a door and users arm or disarm the alarm with a quick swipe of a Mifare tag - no PIN to remember - making everyday operation faster at busy entry points.
At a glance
- Wireless Mifare tag reader for arming and disarming an AX PRO alarm
- 868MHz two-way wireless - must match your AX PRO hub's RF band
- AES-128 encryption and clear multi-colour LED feedback
- Stay arm / away arm / disarm by area, plus patrol tag check-in
- Front and rear tamper, 3 x AA batteries, up to 2 years standby
Hikvision DS-PDC10AM-EG2-WB Ax Pro Wireless Outdoor Curtain PIR Detector, Anti-Mask, IP65
The Hikvision DS-PDC10AM-EG2-WB is an outdoor curtain PIR detector for AX PRO alarm systems. Its narrow 5° beam forms an invisible curtain along a wall, window line or balcony, catching an intruder at the perimeter - before they reach a door or window - with active anti-masking to stop it being quietly disabled.
At a glance
- Curtain-style PIR detection, narrow 5° beam, 10m wall mount / 5m ceiling mount, 32 zones
- Active IR anti-masking alarms if the lens is covered or sprayed
- IP65 weatherproof; -25 to 60°C; L-shaped adapter bracket included
- Pet immunity up to 12kg (wall mount; none on ceiling mount)
- Tri-X two-way wireless to an AX PRO hub, up to 1km, 433MHz; two CR123A, up to 5 years
Hikvision DS-PDCL12DT-EG2 Wired Dual-Tech 360 Degree Ceiling Detector with EOLR
The Hikvision DS-PDCL12DT-EG2 is a wired dual-technology ceiling detector that combines PIR with 24GHz microwave for 360-degree coverage out to 12 metres. The two technologies cross-verify movement to cut false alarms, it runs on 9-16VDC with an onboard end-of-line resistor, and it is for indoor ceiling mounting.
At a glance
- Dual-tech: PIR + 24GHz microwave cross-verification, 360-degree, 12m, 172 zones
- Wired detector: 9-16VDC (12VDC typical), 100mA; onboard EOLR (jumper-selectable)
- Grade 2 interior; ceiling mount 2.4m to 4m, indoor
- Digital temperature compensation, sealed optics, creep-zone protection
- Front tamper protection; connects to AX Hybrid Pro or general wired panel zones
Hikvision AX PRO Series DS-PDPC12P-EG2-WB Wireless PIRCAM Detector with Image Verification
The Hikvision DS-PDPC12P-EG2-WB is a wireless PIRCAM detector for AX PRO alarm systems. It combines a passive infrared motion sensor with a built-in camera that captures JPEG snapshots when the alarm triggers, so you or a monitoring centre can see what set it off - turning a bare motion alert into a verified event over a fully wireless link.
At a glance
- PIR motion + built-in camera for image verification (JPEG snapshots on alarm)
- 12m range / 85.9 degree / 52 detection zones; up to 30kg pet immunity
- Polarising IR lens with 12m infrared fill for clearer low-light snapshots
- CAM-X two-way wireless on 433MHz, up to 800m open-air, AES-128
- Three CR123A batteries, up to 6 years; front and rear tamper; indoor wall mount
Before you buy
What customers ask most before ordering from this range — and how we deliver.
Which kit is right for me?
Start with three questions: how many areas do you need to cover, do you want colour night vision, and do you want AI alerts that ignore cars and animals? For most homes, a 4-camera 8MP ColorVu or Full-Colour kit is the sweet spot. Not sure? Use our CCTV Advisor — answer a few questions and it recommends a kit — or email us and we'll spec it with you.
Is your Hikvision, Dahua, HiLook and TP-Link VIGI stock genuine Australian stock?
Yes, 100%. Every Hikvision, Dahua, HiLook and TP-Link VIGI product we sell is a genuine Australian-market model sourced through Australian supply chains — never grey imports. That means factory-sealed units, Australian-region firmware that works with the official apps out of the box, and a full 3-year local warranty.
How long does delivery take?
Metro delivery usually takes 2–4 business days after dispatch, and regional areas may take longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
How much is shipping?
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
What warranty do you offer?
All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
What is your return policy?
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Do you offer installation?
We can connect you with licensed installers in Sydney and Melbourne. Installation typically starts from around $200 per camera depending on cable runs and site conditions. Email sales@smarket.com.au with your address and camera count for a quote.
Alarms by Brand
Compare alarm systems across the range
Security Cameras
Add cameras alongside your alarm system
