Tactical Power Supply, 14.3V DC, 2.5A, Plug Pack, Required for Hikvision Hybrid Alarm
1 1
Hikvision

Tactical Power Supply, 14.3V DC, 2.5A, Plug Pack, Required for Hikvision Hybrid Alarm

SKU: TP-TP14.3-2.5APP
Description

The Tactical TP-TP14.3-2.5APP is the plug-pack power supply that runs a Hikvision AX Hybrid Pro alarm panel. It delivers a regulated 14.3V DC at 2.5A from a standard wall socket, providing the working power the DS-PHA64 control panel needs - the correct, specified replacement or spare adapter for these wired Hikvision alarm systems.

At a glance
- 14.3V DC, 2.5A plug-pack power supply (up to 35.75W)
- Required to power the Hikvision AX Hybrid Pro DS-PHA64 panel
- Wide 100-240V AC input, wall-mounted compact design
- Correct specified spare or replacement adapter
- Power supply only - panel and backup battery are separate
$39.30 AUD $39.30 AUD $45.00 AUD
Sale 12.67% $5.70 AUD (12.67%)
Business or bulk buyer? Apply for trade pricing →
Found a lower price? We’ll match it →

inc GST + 3 Year Warranty & Support
Free shipping over AUD300

In stock
3-Year WarrantyOn all cameras
Free ShippingOn orders over $300
30-Day ReturnsUnopened items
Fast Delivery1–5 days Australia-wide
Build your setup Build a complete CCTV system

A camera needs an NVR, a hard drive, and cabling to work. Add everything below, or pick a ready-made kit.

Add accessories Optional. Junction box → hides & weatherproofs cable joins (best for outdoors). Brackets → only if mounting on a corner or under eaves. Cable → one per camera; skip if you already have your own.
0
0
0
Bundle total: $39.30

§ 01Overview

What the TP-TP14.3-2.5APP is

The Tactical TP-TP14.3-2.5APP is a wall-mounted plug-pack power supply that provides the 14.3V DC working power for a Hikvision AX Hybrid Pro alarm panel. It is the adapter specified for the DS-PHA64-LP/NP control panel, so it is the right part to buy as a spare or a replacement if the original is lost or faulty.

It accepts a wide 100-240V AC input and outputs a regulated 14.3V DC at 2.5A, up to about 35.75W, which is the supply the panel is designed to run from. The unit is light and compact, wall-mounted for a tidy install near the panel. Because the AX Hybrid Pro is a wired alarm controller, getting the correct power supply matters: an under-spec or incorrect adapter can leave the panel unable to power its bus, keypads and detectors reliably.

Two things are worth noting. First, this is the power supply only - it provides the panel's mains-derived working power, but the panel still needs its own separate backup battery to keep running during a blackout, and that battery is ordered separately. Second, this item is the adapter on its own: the AX Hybrid Pro control panel, keypads, detectors and sirens are all selected separately as part of the full system. Confirm your panel is the AX Hybrid Pro DS-PHA64 family before ordering.

§ 02Engineering

TP-TP14.3-2.5APP specifications

- Provides the 14.3V DC, 2.5A working power required by the Hikvision AX Hybrid Pro DS-PHA64 panel.

- Wide 100-240V AC input suits Australian mains and outputs a regulated 14.3V DC.

- Up to 35.75W output to run the panel's bus, keypads and connected wired devices.

- The correct specified spare or replacement adapter for AX Hybrid Pro control panels.

- Light, compact, wall-mounted plug-pack design for a tidy install near the panel.

- Power supply only - the panel still needs its own separate backup battery for blackout hold-up.

- Adapter on its own - the panel, keypads, detectors and sirens are ordered separately.

§ 04Why choose this

Built for the way you actually use the TP-TP14.3-2.5APP

The correct part

The specified 14.3V DC, 2.5A plug-pack for the AX Hybrid Pro DS-PHA64 panel - no guesswork on voltage or current.

Reliable panel power

Delivers regulated power so the panel runs its bus, keypads and detectors dependably.

Wide mains input

A 100-240V AC input suits Australian mains and varied install conditions.

Tidy and compact

A light, wall-mounted plug-pack keeps the install neat near the control panel.

§ 05Where it fits

Right at home in these scenarios

Replacement supply

Replace a lost or faulty original adapter on an existing AX Hybrid Pro DS-PHA64 panel.

Spare on hand

Keep a spare supply for a critical AX Hybrid Pro alarm install to minimise downtime.

New panel installs

Provide the specified working power when commissioning an AX Hybrid Pro control panel.

Service and maintenance

Carry the correct adapter for servicing Hikvision AX Hybrid Pro wired alarm systems.

§ 06Setup

Installation & setup

01

Confirm the panel

Check your panel is a Hikvision AX Hybrid Pro DS-PHA64 (LP/NP) before fitting this supply.

02

Mount near the panel

Wall-mount the plug-pack near the control panel within reach of a mains socket and the panel's input.

03

Connect per the manual

Connect the 14.3V DC output to the panel as shown in the panel's installation manual, following local mains rules.

04

Fit the backup battery

Install the panel's separate backup battery as well, so the system holds up during a power cut, then power on and test.

§ 07Questions

Frequently asked about the TP-TP14.3-2.5APP

Q.01

What is the TP-TP14.3-2.5APP for?
It is the plug-pack power supply that provides the 14.3V DC working power for a Hikvision AX Hybrid Pro DS-PHA64 alarm panel. It is the specified adapter for these wired panels, suitable as a spare or replacement.
Q.02

Which alarm panel does it power?
It is for the Hikvision AX Hybrid Pro DS-PHA64-LP/NP wired control panel. Confirm your panel is in the AX Hybrid Pro DS-PHA64 family before ordering.
Q.03

What are the output specifications?
It outputs a regulated 14.3V DC at 2.5A, up to about 35.75W, from a wide 100-240V AC input, matching the supply the panel is designed to run from.
Q.04

Does this include a backup battery?
No. This provides the panel's mains-derived working power only. The AX Hybrid Pro panel still needs its own separate backup battery, ordered separately, to keep running during a power cut.
Q.05

Can I use a generic 14V adapter instead?
Use the specified supply. An under-spec or incorrect adapter can leave the panel unable to power its bus, keypads and detectors reliably, which is why the correct 14.3V DC, 2.5A unit is recommended.
Q.06

Does it include the alarm panel?
No. This is the power supply adapter on its own. The AX Hybrid Pro control panel, keypads, detectors and sirens are selected separately as part of the full system.
Q.07

How is it installed?
It is a wall-mounted plug-pack that connects to a standard mains socket and supplies the panel. Mains connection should follow local rules and the panel's installation manual.
Q.08

Is it the same as the AX PRO wireless hub supply?
No. This is specific to the wired AX Hybrid Pro DS-PHA64 panel. The AX PRO wireless hubs use their own power arrangements, so match the supply to your exact panel.

§ 09Bundles

Recommended packages

02

Add control

Add a wired keypad such as the DS-PK1-LRT-HWB keypad for local arming and disarming of the panel.

03

Remember backup battery

This is the working power supply; the panel also needs its own backup battery, ordered separately, for blackout hold-up.