Hikvision DS-PM1-RT-HWB AX Hybrid Tri-X Wireless Receiver
Skip to product information
1
/
of
1
Vendor:
Hikvision
Hikvision DS-PM1-RT-HWB AX Hybrid Tri-X Wireless Receiver
SKU: DS-PM1-RT-HWB
Description
The Hikvision DS-PM1-RT-HWB is a Tri-X wireless receiver for the AX Hybrid PRO wired alarm platform. Connected to a DS-PHA64 panel over the Speed-X bus, it adds 433 MHz two-way wireless so you can mix Hikvision wireless detectors and sounders into a hardwired system - ideal where running cable to every device is impractical.
Key points
- Adds 433 MHz Tri-X wireless to a wired AX Hybrid PRO (DS-PHA64) panel
- Supports up to 32 wireless detectors
- Supports up to 4 indoor and 8 outdoor wireless sounders
- Connects to the panel over the Speed-X bus
- 433 MHz two-way wireless with 128-bit AES and frequency hopping
- Wired 9-28 VDC power; up to 1300 m open-space range
Regular price
$68.85 AUD
Sale price
$68.85 AUD
Regular price
$105.00 AUD
Sale
34.43%
$36.15 AUD
(34.43%)
Delivery, warranty & returns · 3-year warranty · shipped from Australian stock
- Tracked delivery on every order. The tracking number is emailed as soon as it ships.
- Metro delivery: 2–4 business days. Regional areas may take longer. Free standard shipping over $300, flat $25 under.
- 3-year warranty on cameras and recorders, back-to-base, plus your Australian Consumer Law rights.
- 30-day returns on unopened items. Faulty on arrival? We cover return shipping.
- Genuine Australian stock. Never grey imports. Prices include GST.
In stock
No reviews
Hikvision DS-PM1-RT-HWB AX Hybrid Tri-X Wireless Receiver
1
/
of
1
All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Metro delivery usually takes 2–4 business days after dispatch, and regional areas may take longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
01Overview
What the DS-PM1-RT-HWB is
The Hikvision DS-PM1-RT-HWB is a Tri-X wireless receiver that extends Hikvision's AX Hybrid PRO wired alarm platform with wireless capability. It connects to a hardwired AX Hybrid PRO control panel, the DS-PHA64, over the Speed-X bus, and adds a 433 MHz two-way wireless interface so you can bring Hikvision wireless detectors and sounders into what is otherwise a cabled system.
Through the receiver the panel can take up to 32 wireless detectors plus up to 4 indoor and 8 outdoor wireless sounders, which makes it ideal for hybrid installations where the main zones are wired for reliability but some areas - a detached garage, a shed, a hard-to-cable room - are easier to cover wirelessly. The wireless link uses 433 MHz two-way communication with 128-bit AES encryption and frequency hopping to resist jamming and interference, and reaches up to about 1300 metres in open space. Note that it does not enrol portable emergency (panic) buttons.
It is powered over the bus on 9 to 28 VDC (drawing about 100 mA maximum at 12 V) and mounts on a wall, measuring 110 x 155 x 32 mm and weighing 233 g. Two LEDs show power/find-me and alarm/fault status, and its operating range is -10 to 40 C. It is a receiver for the wired AX Hybrid PRO panel, not a standalone wireless hub. It is genuine Australian Hikvision stock with local warranty and support.
02Engineering
DS-PM1-RT-HWB specifications
- Adds 433 MHz Tri-X wireless to a wired AX Hybrid PRO (DS-PHA64) panel
- Supports up to 32 wireless detectors
- Supports up to 4 indoor and 8 outdoor wireless sounders
- Connects to the control panel over the Speed-X bus
- 433 MHz two-way wireless with 128-bit AES encryption
- Frequency hopping resists jamming and interference
- Up to about 1300 m range in open space
- Wired 9-28 VDC power (about 100 mA max at 12 V)
- Wall-mount, 110 x 155 x 32 mm, 233 g; does not enrol portable panic buttons
- Supports up to 32 wireless detectors
- Supports up to 4 indoor and 8 outdoor wireless sounders
- Connects to the control panel over the Speed-X bus
- 433 MHz two-way wireless with 128-bit AES encryption
- Frequency hopping resists jamming and interference
- Up to about 1300 m range in open space
- Wired 9-28 VDC power (about 100 mA max at 12 V)
- Wall-mount, 110 x 155 x 32 mm, 233 g; does not enrol portable panic buttons
03Full datasheet
Detailed specifications
Network & Storage
| Feature | Detail |
|---|---|
| RF frequency | 433 MHz |
| Wireless security | Frequency hoping 128 AES encryption |
Event & Alarm
| Feature | Detail |
|---|---|
| Alarm input | Up to 32 wireless detectors (portable emergency button is not included) |
| Wireless sounder | Up to 4 wireless indoor sounder, 8 wireless outdoor sounder |
Interface
| Feature | Detail |
|---|---|
| Bus | 1 Speed-X bus |
| LED Indicator | 1. Green: power/find me; 2. Orange: alarm/fault |
General & Environment
| Feature | Detail |
|---|---|
| Power supply | 9 to 28 VDC, 1A |
| Power consumption | Maximum current 100 mA@12 VDC; Quiescent current 40 mA@12 VDC |
| Operation temperature | -10°C to 40°C |
| Operation humidity | 10% to 90% |
| Dimension(WxHxD) | 110 mm × 155 mm × 32 mm |
| Shell material | Plastic |
| Weight | 233 g |
| Network & Storage — RF frequency | 433 MHz |
|---|---|
| Network & Storage — Wireless security | Frequency hoping 128 AES encryption |
| Event & Alarm — Alarm input | Up to 32 wireless detectors (portable emergency button is not included) |
| Event & Alarm — Wireless sounder | Up to 4 wireless indoor sounder, 8 wireless outdoor sounder |
| Interface — Bus | 1 Speed-X bus |
| Interface — LED Indicator | 1. Green: power/find me; 2. Orange: alarm/fault |
| General & Environment — Power supply | 9 to 28 VDC, 1A |
| General & Environment — Power consumption | Maximum current 100 mA@12 VDC; Quiescent current 40 mA@12 VDC |
| General & Environment — Operation temperature | -10°C to 40°C |
| General & Environment — Operation humidity | 10% to 90% |
| General & Environment — Dimension(WxHxD) | 110 mm × 155 mm × 32 mm |
| General & Environment — Shell material | Plastic |
| General & Environment — Weight | 233 g |
04Why choose this
Built for the way you actually use the DS-PM1-RT-HWB
Plenty of capacity
One receiver brings up to 32 wireless detectors and up to 12 wireless sounders (4 indoor, 8 outdoor) into the wired panel.
Secure, robust link
433 MHz two-way wireless with 128-bit AES encryption and frequency hopping keeps signalling protected and resistant to jamming.
Ideal for retrofits
Where adding new cable is disruptive, the receiver lets you extend an existing AX Hybrid PRO system wirelessly into garages, sheds and detached rooms.
05Where it fits
Right at home in these scenarios
Hybrid home alarms
Wire the main living zones for reliability and use wireless detectors via the receiver for a garage, granny flat or hard-to-cable room.
Retrofit and extensions
Add coverage to a renovated or extended property without chasing new cable through finished walls.
Detached buildings
Bring a shed, workshop or outbuilding into the wired alarm using wireless detectors and an outdoor wireless sounder.
Commercial sites
Extend a hardwired AX Hybrid PRO system in offices or retail where some areas are easier to protect wirelessly.
06Setup
Installation & setup
-
01
What's in the box
One DS-PM1-RT-HWB wireless receiver with mounting hardware. A compatible AX Hybrid PRO panel (DS-PHA64) and Speed-X bus cabling are required and not included.
-
02
Installation requirements
Mount the receiver on a wall in a central position relative to the wireless devices it will serve, and connect it to the AX Hybrid PRO panel over the Speed-X bus with 9-28 VDC power. Enrol the wireless detectors and sounders through the panel, keeping each within reliable range of the receiver, and walk-test every device before handover. Remember it operates from -10 to 40 C and does not enrol portable panic buttons. Professional installation is recommended for hybrid alarm work.
08Questions
Frequently asked about the DS-PM1-RT-HWB
Q.01
What is the DS-PM1-RT-HWB for?
It is a wireless receiver that adds 433 MHz wireless capability to a wired Hikvision AX Hybrid PRO alarm panel. With it fitted, the hardwired DS-PHA64 panel can use Hikvision wireless detectors and sounders alongside its cabled zones, which is the point of a hybrid system.
Q.02
Which panel does it connect to?
It is designed for the AX Hybrid PRO wired panel, the DS-PHA64-LP/NP, and connects to it over the Speed-X bus. It is not a standalone hub and does not work on its own or with the wireless AX PRO PWA96 panels.
Q.03
How many wireless devices can it add?
Through one receiver the system supports up to 32 wireless detectors, plus up to 4 indoor and 8 outdoor wireless sounders. This lets you cover areas that are difficult to cable while keeping the main zones hardwired.
Q.04
Does it support wireless panic buttons?
No. The receiver supports a wide range of AX wireless detectors and sounders, but portable emergency (panic) buttons are not included in the devices it enrols. Plan those zones accordingly when designing the system.
Q.05
What is the wireless range?
The wireless link reaches up to about 1300 metres in open space. Walls, floors and other obstructions reduce that significantly inside a building, so position the receiver centrally and within reliable range of the wireless devices it serves.
Q.06
How is it powered and where does it mount?
It is powered over the Speed-X bus from the panel on 9 to 28 VDC, drawing about 100 mA at most, and mounts on a wall. It is not battery powered, so it relies on the wired connection to the AX Hybrid PRO panel.
Q.07
Is the wireless connection secure?
Yes. It uses 433 MHz two-way communication with 128-bit AES encryption and frequency hopping, which protects the signalling between the wireless devices and the panel and helps it resist jamming and interference.
Buying from Smarket
Is your Hikvision, Dahua, HiLook and TP-Link VIGI stock genuine Australian stock?
Yes, 100%. Every Hikvision, Dahua, HiLook and TP-Link VIGI product we sell is a genuine Australian-market model sourced through Australian supply chains — never grey imports. That means factory-sealed units, Australian-region firmware that works with the official apps out of the box, and a full 3-year local warranty.
How long does delivery take?
Metro delivery usually takes 2–4 business days after dispatch, and regional areas may take longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
How much is shipping?
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
What warranty do you offer?
All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
What is your return policy?
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Do you offer installation?
We can connect you with licensed installers in Sydney and Melbourne. Installation typically starts from around $200 per camera depending on cable runs and site conditions. Email sales@smarket.com.au with your address and camera count for a quote.
10Bundles
Recommended packages
Pair with the AX Hybrid PRO panel
The receiver connects to a wired DS-PHA64-LP/NP AX Hybrid panel, or start from the KIT-PHA64 AX Hybrid kit.
Add wireless detection
Enrol wireless devices such as the DS-PDP15P-EG2-WB PIR or DS-PDMC-EG2-WB door contact through the receiver.
Add wireless and wired sounders
Use a wireless DS-PS1-E-WB outdoor siren, or a wired DS-PS1-B wired siren on the panel itself.