Hikvision DS-PDC10DM-VG3 Outdoor Directional Dual-Tech Anti-Mask Curtain Detector with EOLR, Slim, IP65
Email us
1 1
Hikvision

Hikvision DS-PDC10DM-VG3 Outdoor Directional Dual-Tech Anti-Mask Curtain Detector with EOLR, Slim, IP65

SKU: DS-PDC10DM-VG3
Description

The Hikvision DS-PDC10DM-VG3 is a wired outdoor dual-tech curtain detector for AX Hybrid Pro and general wired alarm panels. It combines a PIR sensor with a 24GHz microwave sensor that must both agree before it alarms, throwing a narrow 5 degree curtain along a wall, window or balcony to catch an intruder at the perimeter - with far fewer false alarms outdoors.

At a glance
- Wired dual-tech detection: PIR plus 24GHz microwave must both trigger, cutting false alarms
- Narrow 5 degree curtain, 10m on wall mount / 6m on ceiling, 32 zones, directional detection
- Active IR anti-masking alarms if the lens is covered or sprayed
- IP65 weatherproof; -25 to 60 degrees; slim body, L-shaped adapter bracket included
- Normally-closed output with selectable EOL resistors; 9-16VDC; front and rear tamper

$82.15 AUD $82.15 AUD $97.00 AUD
Sale 15.31% $14.85 AUD (15.31%)

Log in to save 3%

Trade pricingPrice match
Delivery, warranty & returns · 3-year warranty · shipped from Australian stock
  • Tracked delivery on every order. The tracking number is emailed as soon as it ships.
  • Metro delivery: 2–4 business days. Regional areas may take longer. Free standard shipping over $300, flat $25 under.
  • 3-year warranty on cameras and recorders, back-to-base, plus your Australian Consumer Law rights.
  • 30-day returns on unopened items. Faulty on arrival? We cover return shipping.
  • Genuine Australian stock. Never grey imports. Prices include GST.
  • American Express
  • Apple Pay
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Union Pay
  • Visa

See all FAQs →

In stock

01Overview

What the DS-PDC10DM-VG3 is

The Hikvision DS-PDC10DM-VG3 is a wired outdoor curtain detector that uses two sensing technologies together for dependable perimeter protection. A passive infrared sensor and a 24GHz microwave sensor must both detect a target before the unit alarms, which dramatically cuts the false alarms that catch out single-technology detectors outdoors - from wind-blown foliage, heat or small animals.

It throws a thin 5 degree curtain of detection, reaching 10m on a wall mount or 6m on a ceiling mount, across 32 zones with a detectable speed of 0.2 to 3m/s. Active IR anti-masking raises an alert if the lens is covered, sprayed or obstructed, so an intruder cannot quietly disable it first. Directional detection lets the system respond based on which way a target is moving, and a slim body suits window-frame mounting, with an L-shaped adapter bracket included for aiming. The IP65 housing handles outdoor conditions from -25 to 60 degrees.

Being wired, it gives a normally-closed alarm output with selectable end-of-line resistors, so the panel can supervise the zone for cut or shorted wiring, and front and rear tamper switches report interference. It runs on 9-16VDC (typically 12VDC) at a low current draw. It connects to an AX Hybrid Pro panel or another general wired alarm panel - not a wireless AX PRO hub. For a wireless equivalent, the DS-PDC10DM-EG2-WB is the hub-based dual-tech outdoor curtain detector, and the DS-PDC10AM-VG3 is the PIR-only wired version.

02Engineering

DS-PDC10DM-VG3 specifications

- Dual-technology detection: a PIR sensor and a 24GHz microwave sensor must both agree before alarming, cutting outdoor false alarms.

- Narrow 5 degree curtain reaches 10m on wall mount or 6m on ceiling across 32 zones, with directional detection support.

- Active IR anti-masking alarms immediately if the lens is covered, sprayed or obstructed.

- IP65 weatherproof housing rated for -25 to 60 degree outdoor operation, with a slim body and an L-shaped adapter bracket included.

- Normally-closed alarm output with selectable EOL resistors for supervised, tamper-proof wiring; front and rear tamper.

- Wired 9-16VDC (typically 12VDC) at a low current draw, with clear LED indicators for PIR, microwave, mask and alarm states.

04Why choose this

Built for the way you actually use the DS-PDC10DM-VG3

Far fewer outdoor false alarms

Dual PIR-plus-microwave sensing requires both to agree, so wind, heat and small animals are far less likely to trigger it.

Catch intruders at the perimeter

A narrow curtain beam guards walls, windows and balconies, giving warning before entry rather than after.

Anti-masking protection

Active IR anti-masking alarms if the lens is blocked, so the detector cannot be quietly disabled.

Supervised wired zone

A normally-closed output with selectable EOL resistors lets the panel watch for cut or shorted cabling.

05Where it fits

Right at home in these scenarios

Windows and balconies

Lay a curtain across ground-floor windows, sliding doors and balconies to stop entry attempts.

External walls and fence lines

Guard the face of a building or a fenced boundary along its length, outdoors in IP65 conditions.

High-false-alarm sites

Use dual-tech sensing where a single PIR would over-trigger from weather, traffic or wildlife.

Perimeter-first systems

Combine with indoor detectors so the alarm catches both the approach and any entry that follows.

06Setup

Installation & setup

  1. Choose wall or ceiling

    Wall mount gives the full 10m reach; ceiling mount gives 6m. Use the included L-shaped adapter to aim the 5 degree curtain.

  2. Aim the curtain

    Align the narrow beam along the wall, window or balcony you are protecting, at a mounting height of 2 to 4m.

  3. Wire to the panel

    Connect the normally-closed output and tamper to a wired panel zone, fitting the selectable EOL resistor for your panel.

  4. Power and test

    Apply 9-16VDC, enable anti-masking and directional detection as needed, then walk-test the curtain before arming.

08Questions

Frequently asked about the DS-PDC10DM-VG3

Q.01

Is the DS-PDC10DM-VG3 wired or wireless?
It is wired, connecting by cable to an AX Hybrid Pro panel or another general wired alarm panel. For a wireless hub-based version, choose the DS-PDC10DM-EG2-WB instead.
Q.02

What does dual-tech detection mean?
It has two sensors - passive infrared and 24GHz microwave - that must both detect a target before it alarms. Requiring both to agree greatly reduces false alarms outdoors from heat, wind or small animals.
Q.03

Can it be used outdoors?
Yes, it is rated IP65 and operates from -25 to 60 degrees, so it suits external walls, windows, balconies and perimeters when mounted correctly.
Q.04

What does anti-masking do?
Active IR anti-masking watches the lens and alarms if it is covered, sprayed or blocked, so an intruder cannot quietly disable the detector before approaching.
Q.05

How far does the curtain reach?
Up to 10m on a wall mount or 6m on a ceiling mount, over a narrow 5-degree beam across 32 detection zones.
Q.06

Does it have pet immunity?
Its datasheet does not specify a pet-immunity weight, so it is best treated as a perimeter detector rather than a pet-tolerant room sensor. Aim the curtain where pets cannot cross it.
Q.07

How does it wire to the panel?
It provides a normally-closed alarm output with selectable end-of-line resistors, so the panel can supervise the zone for cut or shorted cabling, plus front and rear tamper. It runs on 9-16VDC.
Q.08

Which panels does it work with?
AX Hybrid Pro and other general wired alarm panels. It is a wired detector, so it does not enrol to a wireless AX PRO hub.

Buying from Smarket

Is your Hikvision, Dahua, HiLook and TP-Link VIGI stock genuine Australian stock?

Yes, 100%. Every Hikvision, Dahua, HiLook and TP-Link VIGI product we sell is a genuine Australian-market model sourced through Australian supply chains — never grey imports. That means factory-sealed units, Australian-region firmware that works with the official apps out of the box, and a full 3-year local warranty.

How long does delivery take?

Metro delivery usually takes 2–4 business days after dispatch, and regional areas may take longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.

How much is shipping?

Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.

What warranty do you offer?

All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.

What is your return policy?

You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.

Do you offer installation?

We can connect you with licensed installers in Sydney and Melbourne. Installation typically starts from around $200 per camera depending on cable runs and site conditions. Email sales@smarket.com.au with your address and camera count for a quote.

See all FAQs →

10Bundles

Recommended packages

02

Want PIR-only or wireless?

The DS-PDC10AM-VG3 is the wired PIR-only curtain version, and the DS-PDC10DM-EG2-WB is the wireless hub-based dual-tech model.