Hikvision DS-PDC10AM-VG3 AX Hybrid Series Wired PIR AM Curtain Detector
The Hikvision DS-PDC10AM-VG3 is a slim wired PIR curtain detector for AX Hybrid Pro alarm systems. It casts a narrow vertical curtain of detection along a window or door, raising the alarm the instant someone breaches that line while letting people move freely inside the room behind it.
At a glance
- Narrow 5-degree PIR curtain beam, 10m wall-mount or 6m ceiling-mount range
- Active IR anti-masking (AM) reports any attempt to spray, cover or block the lens
- 32 detection zones, directional detection and digital temperature compensation
- IP65 rated for both indoor and outdoor use, -10 to 55 degrees C
- Wired: NC alarm output, selectable EOL resistors, front and rear tamper, 9-16 VDC
Delivery, warranty & returns · 3-year warranty · shipped from Australian stock
- Tracked delivery on every order. The tracking number is emailed as soon as it ships.
- Metro delivery: 2–4 business days. Regional areas may take longer. Free standard shipping over $300, flat $25 under.
- 3-year warranty on cameras and recorders, back-to-base, plus your Australian Consumer Law rights.
- 30-day returns on unopened items. Faulty on arrival? We cover return shipping.
- Genuine Australian stock. Never grey imports. Prices include GST.
All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Metro delivery usually takes 2–4 business days after dispatch, and regional areas may take longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
01Overview
What the DS-PDC10AM-VG3 is
The Hikvision DS-PDC10AM-VG3 is a wired PIR anti-mask curtain detector for the AX Hybrid Pro alarm range. Unlike a wide-angle room PIR, a curtain detector projects a thin, vertical fan of infrared detection - so it can guard the plane of a window or doorway and trigger the moment that line is crossed, while normal movement deeper inside the room is ignored.
Its narrow 5-degree beam reaches 10m when wall-mounted or 6m when ceiling-mounted, across 32 detection zones, and an included L-shaped adapter makes it easy to set on a frame or in a corner. Active IR anti-masking (the AM in the name) watches for any attempt to spray, cover or obstruct the lens and reports it, while digital temperature compensation, sealed optics, creep-zone protection and a 6500lux white-light filter keep detection stable and cut false alarms. Directional detection lets the system distinguish the way a target is moving.
This is a wired device: it gives a normally closed (NC) alarm output with selectable end-of-line (EOL) resistors for both alarm and tamper wiring, plus front and rear tamper switches. It runs on 9 to 16 VDC (typically 12 VDC) and connects to a wired zone on a Hikvision AX Hybrid Pro panel such as the DS-PHA64-LP/NP, or to another compatible 12 VDC alarm panel. The IP65 housing suits indoor and sheltered outdoor positions.
02Engineering
DS-PDC10AM-VG3 specifications
- Active IR anti-masking (AM) detects and reports spraying, covering or blocking of the lens for added tamper security.
- 32 detection zones with directional detection and a detectable speed of 0.2 to 3 m/s for precise, intelligent coverage.
- Digital temperature compensation, sealed optics, creep-zone protection and a 6500lux white-light filter reduce false alarms.
- IP65 weather-resistant housing rated for indoor and outdoor use across -25 to 60 degrees C.
- Wired NC alarm output with selectable EOL resistors and front and rear tamper for supervised, secure wiring.
- Runs on 9 to 16 VDC (typically 12 VDC) at just 22mA, with an included L-shaped adapter for flexible wall or ceiling mounting.
04Why choose this
Built for the way you actually use the DS-PDC10AM-VG3
Tamper-aware detection
Active IR anti-masking plus front and rear tamper report spraying, covering or interference with the detector.
Stable, low false alarms
Temperature compensation, sealed optics and a white-light filter keep wired detection dependable indoors and out.
Flexible wired fit
An NC output with selectable EOL resistors and an included L-shaped adapter make it easy to add to AX Hybrid Pro or other 12V panels.
05Where it fits
Right at home in these scenarios
Window perimeters
Run a curtain across vulnerable windows so an attempted entry is caught the moment the plane is crossed.
Doors and French doors
Protect entry doors and glazed doors while allowing normal indoor movement behind the beam.
Trap zones indoors
Create a discreet trap across a hallway or stairwell that a moving intruder must break.
Sheltered outdoor openings
Use the IP65 rating to guard openings on patios, verandahs and other covered exterior areas.
06Setup
Installation & setup
-
01
Plan the beam
Decide which window or door plane to guard, and mount so the 5-degree curtain runs along that opening within the 10m wall or 6m ceiling range.
-
02
Fit with the adapter
Use the included L-shaped adapter to set the angle on a frame, wall or ceiling, keeping the lens clear of obstructions.
-
03
Wire to the panel
Connect the NC alarm output and tamper to a wired zone on the AX Hybrid Pro panel, fitting the selectable EOL resistors for supervised wiring.
-
04
Set and walk test
Power up on 12 VDC, then walk through the protected plane to confirm the alarm triggers and that normal indoor movement does not.
08Questions
Frequently asked about the DS-PDC10AM-VG3
Q.01
What is a curtain detector and how is it different from a normal PIR?
Q.02
Is the DS-PDC10AM-VG3 wired or wireless?
Q.03
What does the AM (anti-masking) feature do?
Q.04
How far does it detect?
Q.05
Can it be used outdoors?
Q.06
Will it ignore my pets?
Q.07
Which panel does it work with?
Q.08
Is it hard to install?
Buying from Smarket
Is your Hikvision, Dahua, HiLook and TP-Link VIGI stock genuine Australian stock?
Yes, 100%. Every Hikvision, Dahua, HiLook and TP-Link VIGI product we sell is a genuine Australian-market model sourced through Australian supply chains — never grey imports. That means factory-sealed units, Australian-region firmware that works with the official apps out of the box, and a full 3-year local warranty.
How long does delivery take?
Metro delivery usually takes 2–4 business days after dispatch, and regional areas may take longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
How much is shipping?
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
What warranty do you offer?
All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
What is your return policy?
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Do you offer installation?
We can connect you with licensed installers in Sydney and Melbourne. Installation typically starts from around $200 per camera depending on cable runs and site conditions. Email sales@smarket.com.au with your address and camera count for a quote.
10Bundles
Recommended packages
Connect to a wired panel
This wired detector reports to an AX Hybrid Pro panel. Build the system around the DS-PHA64-LP/NP control panel, or start with the all-in-one KIT-PHA64 AX Hybrid Pro kit.
Layer your perimeter
Add the DS-PDSK-P shock detector on doors, windows and frames for forced-entry vibration, and manage the system from the DS-PK1-LRT-HWB wired keypad.
Add a sounder
Fit the wired DS-PS1-B external siren so a breach triggers a loud external warning on the AX Hybrid Pro system.
