Alarm
All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Metro delivery usually takes 2–4 business days after dispatch, and regional areas may take longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
Alarm
Bosch HCT-4UL Four Channel DSRF Keyfob, Designed in Australia
The Bosch HCT-4UL is a four channel DSRF keyfob designed in Australia: away arming with a panic function, disarm, stay arming and an optional fourth channel, in a stainless steel finish with a slide cover so it is not pressed in a pocket.
What you get
- 1 × HCT-4UL four channel keyfob with a slide cover, in a stainless steel finish
You'll also need
- A DSRF receiver on the alarm panel. This fob is only suitable for the RF3212E version of the DSRF receiver, and the RFRC-STR2 is the receiver that replaces the RF3212E
- A CR2032 cell when the low battery warning appears
Bosch RFRC-STR2 RADION Wireless Receiver for Solution Panels
The Bosch RFRC-STR2 is the RADION receiver ST, the wireless receiver that puts RADION and DSRF devices on a Streamline Bus Solution panel: motion detectors, door contacts, keyfobs, panic buttons and repeaters on 433.42 MHz, wired to the panel on three terminals, and the replacement for the older RF3212E receiver.
What you get
- 1 × RFRC-STR2 wireless receiver in a white plastic sliding self-locking enclosure
- 1 × hardware pack, 1 × installation guide and 1 × reference guide
You'll also need
- A listed panel: Solution 6000 or 144, such as the CC610P board, Solution 64, 16Plus, 16i, Ultima 880 or 880, or any panel that previously used an RF3212E
- A three-core cable run from the panel, 0.65 mm (22 AWG) to 1.3 mm (16 AWG), no longer than 300 m
- Wireless devices to learn in, such as the RFDL-11 TriTech, the RFPR-12 PIR, the RFDW-SM contact or the RFKF-FBS keyfob
Bosch CP736B Solution 6000 Colour Smart Card Keypad
The Bosch CP736B is a 3.5" colour graphic keypad for Solution 6000 owners who want card-based arming and disarming: a built-in 40bit MiFare smart card reader, alphanumeric prompting on a backlit colour screen, and lock and egress terminals for a door at the keypad position.
What you get
- 1 × CP736B colour keypad in white, with a manual and a mounting back plate
You'll also need
- A Solution 6000 or Solution 6000-IP panel, such as the CC610P panel PCB
- Cable for the panel's RS485 LAN, and MiFare cards or tokens if users will arm and disarm by card
- For a door lock: a relay with a protection diode and a separate lock power supply, since the keypad's lock output does not drive a lock directly
Bosch B338 Universal Ceiling‑mount Bracket
The Bosch B338 is a swiveling universal bracket that lets you ceiling-mount a Bosch motion detector and aim it exactly where you need it. The plastic surface-mount bracket gives a vertical swivel range of +7° to -16° and a horizontal range of ±45°, so you can point a wall-pattern detector down into a room from the ceiling. It suits many Bosch detector types, including the Blue Line range.
Key points
- Universal ceiling-mount bracket for many Bosch detectors
- Vertical swivel +7° to -16°, horizontal swivel ±45° for precise aiming
- Plastic, surface-mount, swiveling design
- Lets a wall-coverage detector be mounted centrally on the ceiling
- Note: pet immunity can no longer be assured once a detector is ceiling-mounted on this bracket
Bosch 2000 Series (8 Zone) Alarm Kit with Icon Keypad, 2 x Bosch Gen2 PIRS and IP Module
The Bosch Solution 2000 kit with two PIRs and the B426 IP module is an app-ready wired alarm for Australian homes and small businesses. It includes the 8-zone Solution 2000 panel, a blue-backlit Icon keypad, two Blue Line Gen2 PIR motion detectors and the B426-M IP module, so you can arm, disarm and receive push notifications through the free Bosch RSC+ app out of the box.
What's in the box
- Bosch Solution 2000 control panel (8 wired, fully programmable zones)
- LCD Icon keypad with blue backlighting (IUI-SOL-ICON)
- 2x Blue Line Gen2 PIR motion detectors (BPR2-W12, 12m)
- B426-M Ethernet/IP module for the free Bosch RSC+ app
- 18V transformer, 12V 7Ah battery, internal + external sirens with strobe
- Metal enclosure with tamper, resistors and manual; wired-only (no wireless)
Bosch 2000 Series (8 Zone) Alarm Kit with Icon Keypad, 2 x Bosch Gen2 Tritech PIRS and Accessories
The Bosch Solution 2000 kit with two TriTech detectors is a wired alarm built for low false alarms in Australian homes and small businesses. It includes the 8-zone Solution 2000 panel, a blue-backlit Icon keypad and two Blue Line Gen2 TriTech detectors (BDL2-W12G) that combine PIR and microwave sensing. It does not include the IP module; add the B426-M for app control.
What's in the box
- Bosch Solution 2000 control panel (8 wired, fully programmable zones)
- LCD Icon keypad with blue backlighting (IUI-SOL-ICON)
- 2x Blue Line Gen2 TriTech detectors (BDL2-W12G, PIR + microwave, 12m)
- 18V transformer, 12V 7Ah battery, internal 120dB + external sirens with strobe
- Metal enclosure with tamper, resistors and manual
- No IP module (add B426-M for app); wired-only (no wireless)
Bosch 3000 Series Alarm Kit with Icon Keypad – Base Kit
The Bosch Solution 3000 Base Kit is the control core of Bosch's mid-range alarm for Australian homes and businesses. It steps up from the Solution 2000 to up to 16 zones and supports both wired and wireless detectors. The kit includes the Solution 3000 panel, a blue-backlit Icon keypad, an 18V transformer, a 12V 7Ah battery and internal plus external sirens. No detectors are included.
What's in the box
- Bosch Solution 3000 control panel (up to 16 zones, wired or wireless)
- LCD Icon keypad with blue backlighting (IUI-SOL-ICON)
- 18V 1.33A transformer and 12V 7Ah backup battery
- Internal 120dB piezo siren and external siren with strobe
- Metal enclosure with tamper, 8x 3k3 + 8x 6k8 resistors and manual
- No detectors included; wireless detectors supported via the B810 receiver
Bosch 3000 Series Alarm Kit with Icon Keypad, 3 x Bosch Gen2 Quad PIRS and Accessories
The Bosch Solution 3000 kit with an Icon keypad and three Quad PIRs is a wired alarm built for low false alarms in Australian homes and small businesses. It includes the Solution 3000 panel, a blue-backlit Icon keypad and three Blue Line Gen2 Quad PIR motion detectors, which use two PIR sensors that must both trigger. It does not include the IP module, so add the B426-M for app control.
What's in the box
- Bosch Solution 3000 control panel (up to 16 zones, wired or wireless)
- LCD Icon keypad with blue backlighting (IUI-SOL-ICON)
- 3x Blue Line Gen2 Quad PIR motion detectors (BPQ2-W12, 12m)
- 18V transformer, 12V 7Ah battery, internal 120dB piezo siren and external siren with strobe
- Metal enclosure with tamper, 8x 3k3 + 8x 6k8 resistors and a manual
- No IP module (add B426-M for the free RSC+ app)
About Alarm
Protect your home or business with professional wireless alarm systems from Hikvision, Dahua, and Bosch. Modern wireless sensors, keypads, and hub units provide comprehensive intrusion detection alongside your CCTV system — when an alarm zone triggers, linked cameras can automatically begin recording and send visual verification straight to your phone.
Two main system families at Smarket. Hikvision AX Pro is the premium wireless alarm platform with encrypted Tri-X 868MHz wireless protocol, 32 wireless zones (up to 96 zones on advanced hubs), and integration with Hikvision cameras via the Hik-Connect app. Dahua AirShield is Dahua's wireless alarm platform that integrates with Dahua cameras via the DMSS app, providing unified live view, playback, and alarm control in one interface.
The alarm range includes hub units (the central control unit), wireless keypads (arm/disarm), motion detectors (PIR + microwave dual-tech), magnetic door and window contacts, glass break detectors, indoor and outdoor sirens, and panic buttons. Best paired with Hikvision security cameras or Dahua security cameras for visual verification of alarm events.
What's Included in Alarm
Alarm system components in this collection:
Hub units (the central control):
• Hikvision AX Pro hubs — 32 to 96 wireless zones
• Dahua AirShield hubs
• Bosch alarm hubs
Wireless sensors:
• PIR motion detectors (indoor and outdoor)
• Magnetic door and window contacts
• Glass break detectors
• Smoke detectors
User interface:
• Wireless keypads with arm/disarm
• Tag readers (RFID arm/disarm)
• Panic buttons / personal duress
Notification & deterrence:
• Indoor sirens
• Outdoor sirens with strobe
• Voice prompt sirens
Recommended pairings: Hikvision cameras for AX Pro integration, or Dahua cameras for AirShield integration.
Alarm Configurations & Specs
Alarm System Specifications (Typical)
Hikvision AX Pro:
Wireless protocol: Tri-X 868MHz encrypted | Zones: 32 to 96 (hub-dependent) | Backup: cellular optional | Integration: Hik-Connect app, Hikvision cameras, ISAPI / ONVIF | Battery life: typically 5+ years on sensors
Dahua AirShield:
Wireless protocol: encrypted RF | Zones: model-dependent | Integration: DMSS app, Dahua cameras | Battery life: long-life lithium sensors
Common features across both platforms:
• Multi-user app control (assign per-user codes)
• Scheduled arm/disarm (e.g., auto-arm at 10pm)
• Partition support (arm part of property only)
• Push notifications for zone events
• Integration with mobile app cameras for visual verification
• Optional central monitoring connection
Comparing Alarm Models
Hikvision AX Pro vs Dahua AirShield vs Bosch
Choose Hikvision AX Pro when your CCTV is Hikvision or HiLook. Hik-Connect provides unified live view, playback, alarm control, and visual verification in one app. Most established alarm-camera ecosystem in the Smarket range.
Choose Dahua AirShield when your CCTV is Dahua. DMSS app provides the same unified live view + playback + alarm control. Required when you want full integration with Dahua TiOC cameras for combined alarm + active deterrence response.
Choose Bosch when your site is already standardised on Bosch security infrastructure (commercial properties, established installer relationships). Bosch alarms have a separate ecosystem and don't natively integrate with Hikvision or Dahua cameras at the app level.
Both Hikvision AX Pro and Dahua AirShield are equally capable as standalone alarm systems. The decision is driven entirely by which camera ecosystem you have or plan to install — match the alarm to the cameras for unified app experience and visual verification.
Why Choose Alarm?
Wireless DIY Installation
Modern wireless alarm sensors mount with adhesive or screws and communicate with the hub unit over encrypted RF — no complex wiring, no electrician, no permanent damage to the property. Most Australian homes can be fully alarmed in a single afternoon.
CCTV Integration for Visual Verification
When a wireless sensor triggers, linked cameras automatically begin recording and send visual confirmation to your phone. Hikvision AX Pro pairs with Hikvision cameras via Hik-Connect; Dahua AirShield pairs with Dahua cameras via DMSS. False alarms drop dramatically when you can verify each event visually before responding.
App Control with No Subscription
Arm, disarm, and monitor your alarm system from your smartphone via Hik-Connect (AX Pro) or DMSS (AirShield). Receive push notifications for triggered zones. Free apps for iOS and Android — no monthly fees, no subscription tiers, no central monitoring required (optional add-on).
Common Questions about Alarm
Can I link an alarm system with my security cameras?
Do I need a professional installer for a wireless alarm system?
Does a wireless alarm need internet to work?
What is the difference between Hikvision AX Pro and Dahua AirShield?
Before you buy
What customers ask most before ordering from this range — and how we deliver.
Which kit is right for me?
Start with three questions: how many areas do you need to cover, do you want colour night vision, and do you want AI alerts that ignore cars and animals? For most homes, a 4-camera 8MP ColorVu or Full-Colour kit is the sweet spot. Not sure? Use our CCTV Advisor — answer a few questions and it recommends a kit — or email us and we'll spec it with you.
Is your Hikvision, Dahua, HiLook and TP-Link VIGI stock genuine Australian stock?
Yes, 100%. Every Hikvision, Dahua, HiLook and TP-Link VIGI product we sell is a genuine Australian-market model sourced through Australian supply chains — never grey imports. That means factory-sealed units, Australian-region firmware that works with the official apps out of the box, and a full 3-year local warranty.
How long does delivery take?
Metro delivery usually takes 2–4 business days after dispatch, and regional areas may take longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
How much is shipping?
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
What warranty do you offer?
All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
What is your return policy?
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Do you offer installation?
We can connect you with licensed installers in Sydney and Melbourne. Installation typically starts from around $200 per camera depending on cable runs and site conditions. Email sales@smarket.com.au with your address and camera count for a quote.
Alarms by Brand
Compare alarm systems across the range
Security Cameras
Add cameras alongside your alarm system
