All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Metro delivery usually takes 2–4 business days after dispatch, and regional areas may take longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
Alarm
Hikvision AX PRO Series DS-PDMCS-EG2-WB Wireless Slim Magnetic Contact
The Hikvision DS-PDMCS-EG2-WB is an ultra-slim wireless magnetic contact for AX PRO alarm systems. It reports the moment a door or window is opened, so the smallest gap on a perimeter is covered without bulky hardware on the frame.
At a glance
- Slim two-piece magnetic contact, sensor 29 x 69 x 10mm and magnet 14 x 69 x 10mm
- Triggers when the gap between sensor and magnet exceeds 52mm
- Tri-X two-way wireless on 433MHz, up to 1.2km open-air, AES-128 with frequency hopping
- One CR123A battery, up to 5 years; front and rear tamper
- Indoor use; app set-up with power-up, remote ID or QR-code enrolling
Hikvision AX PRO DS-PDB-IN-Ceiling bracket for PIR
The Hikvision DS-PDB-IN-Ceiling is a ceiling-mount bracket for Hikvision AX PRO indoor PIR detectors. It lets you mount a wall-pattern detector overhead and angle it where you need it, with a ±50° horizontal adjustment, in a compact lightweight ABS housing. It is an indoor accessory and does not include a detector.
Key points
- Ceiling-mount bracket for Hikvision AX PRO indoor PIR detectors
- ±50° horizontal adjustment to aim the detector
- Lightweight, durable ABS construction
- Compact 41 x 46 x 32 mm; weighs only 8 g
- Indoor use only; detector supplied separately
Hikvision AX PRO Series DS-PDP15P-EG2-WB Wireless PIR Detector
The Hikvision DS-PDP15P-EG2-WB is a wireless indoor PIR motion detector for AX PRO alarm systems. It watches a room for human movement across a wide 85.9 degree field up to 15m, and a Pet mode lets it ignore animals up to 30kg so the alarm is not tripped by the family dog or cat.
At a glance
- Passive infrared detection, 15m range, 85.9 degree angle, 52 detection zones
- Pet immunity up to 30kg when the Pet sensitivity mode is selected
- SEC smart environmental control with 3D optics and digital temperature compensation
- Tri-X two-way wireless on 433MHz, up to 1.2km open-air, AES-128 with frequency hopping
- One CR123A battery, up to 5 years; front and rear tamper; indoor wall mount at 1.8-2.4m
Hikvision DS-PT-M1 Ax Pro Mifare Tag
The Hikvision DS-PT-M1 is a compact 13.56 MHz Mifare contactless tag for Hikvision AX PRO wireless alarm systems. Tap it on the control panel's built-in tag reader or an AX PRO keypad to arm or disarm without entering a code — ideal for family members or staff who do not need full app access.
Key points
- 13.56 MHz Mifare contactless tag for Hikvision AX PRO systems
- Tap to arm or disarm at the panel's tag reader or an AX PRO keypad
- 1024 × 8 bit EEPROM (16 sectors), approx. 10-year data retention
- Durable PVC / ABS body, 41 × 32 × 3.5 mm
- Up to 48 tags per AX PRO panel; available in white or black
Hikvision AX PRO DS-PDB-IN-Wall bracket for PIR
The Hikvision DS-PDB-IN-Wall is a wall-mount bracket for Hikvision AX PRO indoor PIR detectors. It lets you fix a detector into a corner or onto a flat wall and angle it where you need it, with a ±50° horizontal adjustment, hidden cable routing and back-tamper protection, all in a compact lightweight ABS housing. It is an indoor accessory and does not include a detector.
Key points
- Wall-mount bracket for Hikvision AX PRO indoor PIR detectors
- ±50° horizontal adjustment to aim the detector
- Supports hidden wiring for a clean, tamper-resistant install
- Back tamper and anti-torque structure
- Lightweight, durable ABS; 38 x 51 x 31.5 mm, 13 g
- Indoor use only; detector supplied separately
Bosch 2000 Series (8 Zone) Alarm Kit with Icon Keypad, 2 x Bosch Gen2 PIRS and Accessories
The Bosch Solution 2000 kit with two PIRs is a complete wired starter alarm for Australian homes and small businesses. It includes the 8-zone Solution 2000 panel, a blue-backlit Icon keypad, two Blue Line Gen2 PIR motion detectors, an 18V transformer, a 12V 7Ah battery and internal plus external sirens. It does not include the IP module, so add the B426-M if you want app control.
What's in the box
- Bosch Solution 2000 control panel (8 wired, fully programmable zones)
- LCD Icon keypad with blue backlighting (IUI-SOL-ICON)
- 2x Blue Line Gen2 PIR motion detectors (BPR2-W12, 12m)
- 18V transformer, 12V 7Ah battery, internal 120dB + external sirens with strobe
- Metal enclosure with tamper, resistors and manual
- No IP module (add B426-M for app); wired-only (no wireless)
Bosch ISC-BPR2-WP12 Blue Line Gen2 Pet Friendly PIR Detector
The Bosch ISC-BPR2-WP12 is the pet-friendly version of Bosch's everyday hardwired motion detector: 12 m x 12 m of coverage from a dense 77 zone pattern, with immunity for one or two pets up to 20 kg that the installer can switch on or off.
What you get
- 1 × ISC-BPR2-WP12 detector, white, in a high-impact ABS enclosure
You'll also need
- An alarm panel with a spare zone and a 24-hour tamper circuit
- A cable run from the panel carrying its supply, the alarm relay and the tamper, plus the end-of-line resistors the panel requires
- A bracket if it is not going flat on a wall or into a corner, such as the B338 ceiling mount
Bosch ISC-BPQ2-W12 Blue Line Gen2 Quad PIR Detector, 12 m
The Bosch ISC-BPQ2-W12 is the detector for a corridor, a stairwell or a narrow room, the shapes where an ordinary PIR either misses an intruder walking straight at it or cries wolf. It is a quad passive infrared detector: two separate sensors in one housing, each processing its own signal, over 12 m x 12 m.
What you get
- 1 × ISC-BPQ2-W12 detector in a white high-impact ABS enclosure
- 1 × hardware pack with two anchors, two screws and a cable tie, plus a literature pack
You’ll also need
- An alarm panel with a spare zone and a 24-hour tamper circuit
- A cable run from the panel carrying its supply, the alarm relay and the tamper, plus the end-of-line resistors the panel requires
- A bracket if it is not going flat on a wall or into a corner, such as the B338 ceiling mount
Before you buy
What customers ask most before ordering from this range — and how we deliver.
Which kit is right for me?
Start with three questions: how many areas do you need to cover, do you want colour night vision, and do you want AI alerts that ignore cars and animals? For most homes, a 4-camera 8MP ColorVu or Full-Colour kit is the sweet spot. Not sure? Use our CCTV Advisor — answer a few questions and it recommends a kit — or email us and we'll spec it with you.
Is your Hikvision, Dahua, HiLook and TP-Link VIGI stock genuine Australian stock?
Yes, 100%. Every Hikvision, Dahua, HiLook and TP-Link VIGI product we sell is a genuine Australian-market model sourced through Australian supply chains — never grey imports. That means factory-sealed units, Australian-region firmware that works with the official apps out of the box, and a full 3-year local warranty.
How long does delivery take?
Metro delivery usually takes 2–4 business days after dispatch, and regional areas may take longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
How much is shipping?
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
What warranty do you offer?
All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
What is your return policy?
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Do you offer installation?
We can connect you with licensed installers in Sydney and Melbourne. Installation typically starts from around $200 per camera depending on cable runs and site conditions. Email sales@smarket.com.au with your address and camera count for a quote.
Alarms by Brand
Compare alarm systems across the range
Security Cameras
Add cameras alongside your alarm system
