Alarm

The Bosch Solution 6000 alarm kit with the CP736B smart keypad and three PIRs is a professional-grade wired alarm for larger Australian homes and small to medium businesses. It pairs the high-end Solution 6000 panel with a colour graphic keypad and integrated smart-card reader, three Blue Line Gen2 PIR detectors and both internal and external sirens, so it is ready to protect the main areas after a licensed install.

What's in the box
- Bosch Solution 6000 control panel (16 zones on board, expandable to 144 wired or wireless)
- Bosch CP736B 3.5-inch colour graphic keypad with integrated smart-card reader (not a touchscreen)
- 3x Blue Line Gen2 PIR motion detectors (BPR2-W12, 12m)
- 18V plug-pack transformer and 12V 7Ah backup battery
- Internal 120dB piezo siren and external siren with strobe
- Metal enclosure with tamper switch, 8x 3k3 + 8x 6k8 resistors and a manual
- No IP module; add the CM751B Conettix IP module for the free Bosch RSC+ app

The Bosch CM751B Solution Conettix IP Ethernet Module connects a Bosch Solution control panel to an existing IP network, giving it a high-security path for alarm reporting and remote control over a LAN or WAN instead of a phone line. It suits the Solution 16i, 144 and 6000 panels, and on a Solution 6000 it is what enables the MyAlarm smartphone app. Reporting uses 128-bit AES encryption with supervised polling, so it is well suited to monitored and high-security sites while removing ongoing PSTN call costs.

Key points
- Conettix IP Ethernet module for Bosch Solution 16i, 144 and 6000 panels
- 128-bit AES (Rijndael) encryption with frequency-variable supervised polling
- RJ45 10/100BASE-TX auto-sensing; dynamic and fixed IP addressing
- Conettix and CSV-IP reporting; PSTN dialler backup reporting path
- Enables the MyAlarm app on a Solution 6000 (paid subscription)
- Powered by the panel; HW750 Riser Kit included; 3-year warranty

The Bosch B810 is the RADION wireless receiver for the Bosch Solution 3000 alarm panel. It lets the panel use Bosch RADION wireless detectors, keyfobs, panic buttons, door and window contacts and repeaters, so you can add protection to rooms where running cable is difficult.

Key points
- Adds RADION wireless devices to a Bosch Solution 3000
- Supervises up to 504 wireless points, 1000 keyfobs and 8 repeaters
- 433.42MHz with dual internal antennas for reliable reception
- Cover and wall tamper, plus RF interference (jamming) detection
- Connects to the SDI2 bus; up to 243m of wiring; 10 to 14VDC, 70mA max
- Indoor use; address switch and external status LEDs for easy install

The Bosch HCT-4UL is a premium 4-button wireless keyfob that arms and disarms a Bosch Solution 3000 alarm from the door or driveway. It works only with the Bosch B810 RADION wireless receiver, and its two extra buttons can be programmed for functions such as opening a gate or garage door.

Key points
- 4-button keyfob for arming and disarming a Bosch Solution 3000
- Two buttons for Arm Away / Arm Stay and Disarm (on/off)
- Two programmable buttons for relays (e.g. gate or garage door)
- Works only with the Bosch B810 RADION receiver (433.42MHz)
- Premium stainless-steel finish with a sliding cover to stop false presses
- CR2032 battery, about 2 years; not for WE800V receivers or the Solution 2000

The Bosch RFRC-STR2 is the RADION wireless receiver for the Bosch Solution 6000 alarm panel. It lets the panel use Bosch RADION wireless detectors, keyfobs, panic buttons, reed contacts and repeaters, so you can add protection to rooms where running cable is difficult.

Key points
- Adds RADION wireless devices to a Bosch Solution 6000 / 144
- Supervises up to 504 wireless points, 1000 keyfobs and 8 repeaters
- 433.42MHz with dual internal antennas for reliable reception
- Cover and wall tamper, plus RF jamming detection
- Wired to the panel by terminal block, within 300m; 12VDC, 100mA max
- Indoor use; address switch and bubble level for easy install

The Bosch CP736B is a 3.5-inch colour graphic keypad for the Solution 6000 alarm panel. Its high-resolution screen shows system status and full-text prompts at a glance, while a built-in 40-bit MiFare smart-card reader lets users arm or disarm by presenting a card or token instead of typing a PIN. Colour-coded illuminated keys, red/green armed indicators and a built-in sounder make day-to-day operation clear, and dedicated lock and egress terminals add simple access control. It connects over the proprietary RS485 keypad LAN.

Key points
- 3.5" colour graphic display with full-text prompts and programming
- Built-in 40-bit MiFare smart-card reader to arm/disarm by token
- Red/green armed-disarmed and blue door-status indicators
- Built-in sounder with individually programmable volume
- Lock and egress terminals for access-control applications
- For Solution 6000 / 6000-IP (and Vision-X) over RS485; +12VDC; white

The Bosch B338 is a swiveling universal bracket that lets you ceiling-mount a Bosch motion detector and aim it exactly where you need it. The plastic surface-mount bracket gives a vertical swivel range of +7° to -16° and a horizontal range of ±45°, so you can point a wall-pattern detector down into a room from the ceiling. It suits many Bosch detector types, including the Blue Line range.

Key points
- Universal ceiling-mount bracket for many Bosch detectors
- Vertical swivel +7° to -16°, horizontal swivel ±45° for precise aiming
- Plastic, surface-mount, swiveling design
- Lets a wall-coverage detector be mounted centrally on the ceiling
- Note: pet immunity can no longer be assured once a detector is ceiling-mounted on this bracket

The Bosch Solution 2000 kit with two PIRs and the B426 IP module is an app-ready wired alarm for Australian homes and small businesses. It includes the 8-zone Solution 2000 panel, a blue-backlit Icon keypad, two Blue Line Gen2 PIR motion detectors and the B426-M IP module, so you can arm, disarm and receive push notifications through the free Bosch RSC+ app out of the box.

What's in the box
- Bosch Solution 2000 control panel (8 wired, fully programmable zones)
- LCD Icon keypad with blue backlighting (IUI-SOL-ICON)
- 2x Blue Line Gen2 PIR motion detectors (BPR2-W12, 12m)
- B426-M Ethernet/IP module for the free Bosch RSC+ app
- 18V transformer, 12V 7Ah battery, internal + external sirens with strobe
- Metal enclosure with tamper, resistors and manual; wired-only (no wireless)