Alarm

The Hikvision DS-PDB-IN-Wall is a wall-mount bracket for Hikvision AX PRO indoor PIR detectors. It lets you fix a detector into a corner or onto a flat wall and angle it where you need it, with a ±50° horizontal adjustment, hidden cable routing and back-tamper protection, all in a compact lightweight ABS housing. It is an indoor accessory and does not include a detector.

Key points
- Wall-mount bracket for Hikvision AX PRO indoor PIR detectors
- ±50° horizontal adjustment to aim the detector
- Supports hidden wiring for a clean, tamper-resistant install
- Back tamper and anti-torque structure
- Lightweight, durable ABS; 38 x 51 x 31.5 mm, 13 g
- Indoor use only; detector supplied separately

The Bosch Solution 2000 kit with two PIRs is a complete wired starter alarm for Australian homes and small businesses. It includes the 8-zone Solution 2000 panel, a blue-backlit Icon keypad, two Blue Line Gen2 PIR motion detectors, an 18V transformer, a 12V 7Ah battery and internal plus external sirens. It does not include the IP module, so add the B426-M if you want app control.

What's in the box
- Bosch Solution 2000 control panel (8 wired, fully programmable zones)
- LCD Icon keypad with blue backlighting (IUI-SOL-ICON)
- 2x Blue Line Gen2 PIR motion detectors (BPR2-W12, 12m)
- 18V transformer, 12V 7Ah battery, internal 120dB + external sirens with strobe
- Metal enclosure with tamper, resistors and manual
- No IP module (add B426-M for app); wired-only (no wireless)

The Bosch BPR2-WP12 is a Blue Line Gen2 pet-friendly PIR motion detector that gives 12 m x 12 m wall-to-wall coverage while ignoring pets up to 20 kg. Two Fresnel lenses create a high-density 77-zone pattern with three lookdown zones, and First Step Processing sets the sensitivity automatically, so there are no field adjustments to make. The installer can switch pet immunity on or off to suit the room. It is a wired detector with a normally-closed relay output and tamper.

Key points
- 12 m x 12 m (40 ft) wall-to-wall PIR coverage at 94 degrees
- Pet immunity for one or two pets up to 20 kg, switchable by the installer
- High-density 77-zone, 7-layer pattern plus three lookdown zones
- First Step Processing - automatic sensitivity, no field adjustments
- Dynamic temperature compensation for reliable catch in any season
- Wired NC relay and tamper; 9-15 VDC; mount 2.2-2.75 m

The Bosch BPQ2-W12 is a Blue Line Gen2 Quad PIR motion detector. It uses two independent PIR sensors that must both detect a target before it raises an alarm, which gives strong, fast catch performance while filtering out the noise and minor disturbances that cause false alarms. It covers 12 m x 12 m wall-to-wall and is a wired detector for a hardwired Bosch alarm panel.

Key points
- Quad PIR: two independent PIR sensors must both activate to alarm
- 12 m x 12 m (40 ft) wall-to-wall coverage, 99° angle
- First Step Processing and dynamic temperature compensation
- Sealed optics and electronics for reliable performance
- Wired detector: normally-closed relay alarm output plus tamper
- Mounting height 2.2 m to 2.75 m, no field adjustments; EN50131 Grade 2
- Note: this is not a pet-immune model; for pets choose a TriTech WP detector

The Bosch BDL2-W12G is a Blue Line Gen2 TriTech motion detector that pairs a passive-infrared sensor with a 10.525 GHz microwave Doppler radar. Because both technologies have to agree before it alarms, it gives strong catch performance with excellent false-alarm immunity across a 12 m x 12 m area. First Step Processing and microwave noise-adaptive processing mean no field adjustments, and it is a wired detector with a normally-closed relay output and tamper. This is the standard (non pet-friendly) model.

Key points
- TriTech: PIR plus 10.525 GHz microwave; both must agree to alarm
- 12 m x 12 m (40 ft) wall-to-wall coverage at 94 degrees
- First Step Processing - automatic sensitivity, no field adjustments
- Microwave noise-adaptive processing rejects repetitive disturbances
- Wired NC relay and tamper; 9-15 VDC; mount 2.2-2.75 m
- Standard non-pet model (for pets up to 45 kg, choose the BDL2-WP12G)

The Bosch IUI-SOL-TS7 TouchOne is a 7-inch high-definition touchscreen codepad for the Bosch Solution 2000 and 3000 alarm panels. Its large colour display, WiFi connectivity and Intercom App make arming, disarming and managing the system simple from one screen.

Highlights
- 7-inch HD 1280x800 IPS capacitive touchscreen (400 nits)
- For Bosch Solution 2000 and 3000 control panels
- Arm, disarm, bypass and rename zones, manage users, PINs and keyfobs
- WiFi for app installs, the Intercom App and automatic updates
- microSD photo slideshow in Standby; portrait or landscape mount

High-density motion sensor featuring dual Fresnel lenses and 77 detection zones for superior intruder response and reliable area coverage.

The Bosch Solution 3000 kit with an Icon keypad and three PIRs is a value wired alarm for Australian homes and small businesses. It includes the Solution 3000 panel, a blue-backlit Icon keypad and three Blue Line Gen2 PIR motion detectors, plus power, battery and sirens. It does not include the IP module, so add the B426-M if you want app control.

What's in the box
- Bosch Solution 3000 control panel (up to 16 zones, wired or wireless)
- LCD Icon keypad with blue backlighting (IUI-SOL-ICON)
- 3x Blue Line Gen2 PIR motion detectors (BPR2-W12, 12m)
- 18V transformer, 12V 7Ah battery, internal 120dB piezo siren and external siren with strobe
- Metal enclosure with tamper, 8x 3k3 + 8x 6k8 resistors and a manual
- No IP module (add B426-M for the free RSC+ app)