Hikvision AX PRO Series DS-PDD12P-EG2-WB Wireless Dual-Tech Detector
The Hikvision DS-PDD12P-EG2-WB is an AX PRO wireless indoor detector that uses two sensing technologies at once - a passive infrared (PIR) sensor and a 24GHz microwave sensor - and only alarms when both agree. That combination cuts false alarms from heat, sunlight and moving curtains while still catching an intruder from the first step.
At a glance
- Dual-tech PIR + 24GHz microwave, 12m range / 85.9° / 52 detection zones
- Up to 30kg pet immunity with creep-zone protection and digital temperature compensation
- Tri-X two-way wireless to an AX PRO hub, up to 1.2km open-air, AES-128 encrypted with frequency hopping
- Two CR123A batteries, up to 5 years standby; front and rear tamper protection
- Indoor wall mount 1.8-2.4m; optional wall and ceiling brackets
inc GST + 3 Year Warranty & Support
Free shipping over AUD300
Build your setup Build a complete CCTV system
A camera needs an NVR, a hard drive, and cabling to work. Add everything below, or pick a ready-made kit.
§ 01Overview
What the DS-PDD12P-EG2-WB is
The Hikvision DS-PDD12P-EG2-WB is a wireless dual-technology motion detector for AX PRO alarm systems, built for indoor rooms where false alarms need to be kept to a minimum. It pairs a passive infrared sensor with a 24GHz microwave sensor and only triggers when both detect the same movement, so heat from radiators, direct sunlight and air-conditioning draughts are far less likely to set the alarm off.
It covers a 12m range across an 85.9° field with 52 detection zones, and ignores pets up to 30kg using creep-zone optics that close the blind spot directly beneath the unit. Digital temperature compensation keeps sensitivity steady as the room warms and cools.
The detector talks to the hub over Hikvision's Tri-X two-way wireless, rated up to 1.2km in open space, with AES-128 encryption and frequency hopping to resist interference and jamming. Two CR123A batteries give up to five years of standby life, and front and rear tamper switches report any attempt to open or remove the unit. It mounts on a wall at 1.8 to 2.4m, with optional wall and ceiling brackets for the best angle. This is the wireless version; a wired DS-PDD12P-EG2 is available for hardwired panels.
§ 02Engineering
DS-PDD12P-EG2-WB specifications
- Covers a 12m range across an 85.9° field with 52 detection zones for full-room coverage without dead angles.
- Pet immunity up to 30kg with creep-zone protection and sealed optics, so cats and dogs are ignored while people are detected.
- Digital temperature compensation automatically adjusts sensitivity as room temperature changes through the day.
- Tri-X two-way wireless to the AX PRO hub, up to 1.2km in open space, with AES-128 encryption and frequency hopping against jamming.
- Two CR123A batteries last up to five years; front and rear tamper switches alert the panel if the cover is opened or the unit removed; enrols by power-up, remote ID or QR code.
§ 03Full datasheet
Detailed specifications
Network & Storage
| Feature | Detail |
|---|---|
| Transmission Technology | Tri-X Wireless |
| Transmission Method | Two-Way RF Wireless |
| Transmission Frequency | 433MHz |
| Transmission Security | Support |
| Transmission Range(Free Space) | 1.2Km |
| Frequency Hopping | Support |
| Enrolling Method | Power up,Remote ID,QR Code |
Event & Alarm
| Feature | Detail |
|---|---|
| Detection Method | Passive Infrared,Microwave |
| Detection Range | 12m |
| Detection Angle | 85.9° |
| Detection Zones | 52 |
| Detectable Speed | 0.3~2m/s |
| Sensitivity | Auto,High,Pet |
| Pet Immunity | 30Kg |
| White Light Filter | 6500lux |
| Microwave Frequency | 24GHz(24.15~24.25GHz) |
| Digital Temperature Compensation | Support |
| Creep Zone Protection | Support |
| Digital Processing | Support |
| Sealed Optics | Support |
| Tamper Protection | Front,Rear |
| Environment Temperature Indicator | Support |
| Signal Strength Indicator | Support |
Interface
| Feature | Detail |
|---|---|
| Power Switch | Power Up Enrolling |
| LED Indicator | Green(PIR), Red(Microwave), Blue(Alarm) |
General & Environment
| Feature | Detail |
|---|---|
| Standard Battery Life | Up to 5 years (standby time) |
| Power Supply | Battery Powered |
| Battery Type | CR123A × 2 |
| Typical Voltage | 3V |
| Operation Temperature | -10 °C to 55 °C (14 °F to 131 °F) |
| Storage Temperature | -20 °C to 60 °C (-4 °F to 140 °F) |
| Operation Humidity | 10% to 90% |
| Dimension(WxHxD) | 65.5mm × 103mm × 48.5mm |
| Weight | 141g |
| Mounting Height | 1.8 to 2.4m |
| Mounting Method | Wall |
| Application Scenario | Indoor |
| Bracket | Optional Wall & Ceiling Accessory |
| Network & Storage — Transmission Technology | Tri-X Wireless |
|---|---|
| Network & Storage — Transmission Method | Two-Way RF Wireless |
| Network & Storage — Transmission Frequency | 433MHz |
| Network & Storage — Transmission Security | Support |
| Network & Storage — Transmission Range(Free Space) | 1.2Km |
| Network & Storage — Frequency Hopping | Support |
| Network & Storage — Enrolling Method | Power up,Remote ID,QR Code |
| Event & Alarm — Detection Method | Passive Infrared,Microwave |
| Event & Alarm — Detection Range | 12m |
| Event & Alarm — Detection Angle | 85.9° |
| Event & Alarm — Detection Zones | 52 |
| Event & Alarm — Detectable Speed | 0.3~2m/s |
| Event & Alarm — Sensitivity | Auto,High,Pet |
| Event & Alarm — Pet Immunity | 30Kg |
| Event & Alarm — White Light Filter | 6500lux |
| Event & Alarm — Microwave Frequency | 24GHz(24.15~24.25GHz) |
| Event & Alarm — Digital Temperature Compensation | Support |
| Event & Alarm — Creep Zone Protection | Support |
| Event & Alarm — Digital Processing | Support |
| Event & Alarm — Sealed Optics | Support |
| Event & Alarm — Tamper Protection | Front,Rear |
| Event & Alarm — Environment Temperature Indicator | Support |
| Event & Alarm — Signal Strength Indicator | Support |
| Interface — Power Switch | Power Up Enrolling |
| Interface — LED Indicator | Green(PIR), Red(Microwave), Blue(Alarm) |
| General & Environment — Standard Battery Life | Up to 5 years (standby time) |
| General & Environment — Power Supply | Battery Powered |
| General & Environment — Battery Type | CR123A × 2 |
| General & Environment — Typical Voltage | 3V |
| General & Environment — Operation Temperature | -10 °C to 55 °C (14 °F to 131 °F) |
| General & Environment — Storage Temperature | -20 °C to 60 °C (-4 °F to 140 °F) |
| General & Environment — Operation Humidity | 10% to 90% |
| General & Environment — Dimension(WxHxD) | 65.5mm × 103mm × 48.5mm |
| General & Environment — Weight | 141g |
| General & Environment — Mounting Height | 1.8 to 2.4m |
| General & Environment — Mounting Method | Wall |
| General & Environment — Application Scenario | Indoor |
| General & Environment — Bracket | Optional Wall & Ceiling Accessory |
§ 04Why choose this
Built for the way you actually use the DS-PDD12P-EG2-WB
Pet friendly to 30kg
Creep-zone optics and intelligent processing ignore cats and dogs up to 30kg so the family pet does not set off the alarm.
Five-year wireless
Two CR123A batteries and Tri-X two-way wireless give years of service with no cabling back to the panel.
Tamper protected
Front and rear tamper switches report any attempt to open or pull the detector off the wall.
§ 05Where it fits
Right at home in these scenarios
Living areas and hallways
Cover lounges, hallways and stairwells where pets roam and sunlight or heating would trouble a basic PIR.
Homes with pets
Keep the alarm armed while cats and dogs move freely thanks to 30kg pet immunity.
Offices and shops
Protect rooms and back areas with dependable detection and few false call-outs.
Retrofit wireless upgrades
Add motion coverage to an existing AX PRO system without running new cable.
§ 06Setup
Installation & setup
Where to mount
Fix to a wall 1.8 to 2.4m high, angled across the room. Avoid pointing it at windows, heaters or air-conditioning vents.
Pairing to the hub
Power it up and enrol it to the AX PRO hub by power-up, remote ID or QR code scan in the Hik-Connect app.
Set pet immunity
Choose the pet sensitivity mode in the app for homes with animals, then walk-test to confirm coverage.
Optional brackets
Fit the optional wall or ceiling bracket to fine-tune the angle in corners, stairwells or wide rooms.
§ 07Questions
Frequently asked about the DS-PDD12P-EG2-WB
Q.01
Will the DS-PDD12P-EG2-WB false-alarm on my pets?
Q.02
How is a dual-tech detector different from a normal PIR?
Q.03
What is the detection range and angle?
Q.04
Which alarm system does it work with?
Q.05
How long does the battery last and what type is it?
Q.06
Can I use it outdoors?
Q.07
Does it need a bracket?
Q.08
Is the wireless link secure?
§ 09Bundles
Recommended packages
Needs an AX PRO hub
This detector reports to a hub - pair it with the DS-PWA96-M-WB hub, or start from the DS-PWA96 alarm kit.
Add a siren
Make intrusions heard with an indoor siren or outdoor siren.
Cover glass and perimeters
Pair with the glass-break detector for windows, or the outdoor curtain detector for outdoor curtains.
Fine-tune the angle
Add the wall bracket or ceiling bracket for awkward rooms and corners.
