Hikvision DS-PDSMK-S-WB Ax Pro Wireless Photoelectric Smoke Sensor Detector
1 1
Hikvision

Hikvision DS-PDSMK-S-WB Ax Pro Wireless Photoelectric Smoke Sensor Detector

SKU: DS-PDSMK-S-WB
Description

The Hikvision DS-PDSMK-S-WB is a wireless photoelectric smoke detector for Hikvision AX PRO alarm systems. It gives early warning of a fire with a photoelectric sensing chamber and a built-in 85 dB sounder, while also alerting your AX PRO system and your phone so you are warned whether you are home or away. A sealed 10-year battery means a decade of protection with no recharging.

Key points
- Photoelectric smoke sensing for early fire warning
- Built-in sounder, 85 dB or more at 3 m
- Two-way 433 MHz wireless with AES-128 encryption
- Range up to 800 m in free space
- Sealed 10-year battery (non-replaceable CR17450)
- Ceiling mount; indoor use; red alarm LED
$74.20 AUD $74.20 AUD $109.00 AUD
Sale 31.93% $34.80 AUD (31.93%)
Business or bulk buyer? Apply for trade pricing →
Found a lower price? We’ll match it →

inc GST + 3 Year Warranty & Support
Free shipping over AUD300

In stock
3-Year WarrantyOn all cameras
Free ShippingOn orders over $300
30-Day ReturnsUnopened items
Fast Delivery1–5 days Australia-wide
Build your setup Build a complete CCTV system

A camera needs an NVR, a hard drive, and cabling to work. Add everything below, or pick a ready-made kit.

Add accessories Optional. Junction box → hides & weatherproofs cable joins (best for outdoors). Brackets → only if mounting on a corner or under eaves. Cable → one per camera; skip if you already have your own.
0
0
0
0
Bundle total: $74.20

§ 01Overview

What the DS-PDSMK-S-WB is

The Hikvision DS-PDSMK-S-WB is a wireless photoelectric smoke detector that adds fire warning to a Hikvision AX PRO alarm system. Its photoelectric sensing chamber is good at picking up the slow, smouldering smoke typical of most house fires, and when it detects smoke it sounds a loud built-in alarm of 85 dB or more at three metres to wake and alert anyone nearby.

Because it is part of the AX PRO system rather than a standalone smoke alarm, it also signals the control panel over two-way 433 MHz wireless secured with AES-128 encryption, with a free-space range up to 800 metres. That means a smoke event can push an alert to your phone through the app and to a monitoring centre, so you are warned even when you are not at home. A red LED confirms an alarm or test, and the detector reports its signal strength and environment temperature back to the hub so you can see it is healthy.

It is powered by a sealed CR17450 lithium battery rated for up to 10 years of standby, which is not replaceable - at the end of its life you replace the whole detector, as is normal for long-life sealed smoke alarms. It mounts on the ceiling for indoor use and is genuine Australian Hikvision stock with local warranty and support. Note that it complements, and does not replace, the mains-powered smoke alarms required by your state's building regulations.

§ 02Engineering

DS-PDSMK-S-WB specifications

- Wireless photoelectric smoke detector for AX PRO alarm systems
- Photoelectric chamber for early warning of smouldering fires
- Built-in sounder, 85 dB or more at 3 m
- Two-way 433 MHz wireless with AES-128 encryption
- Free-space range up to 800 m
- Alerts the AX PRO panel, the app and any monitoring centre
- Sealed 10-year battery (non-replaceable CR17450)
- Red alarm LED; signal-strength and temperature indicators
- Ceiling mount; indoor use; genuine Australian Hikvision stock

§ 03Full datasheet

Detailed specifications

Network & Storage

Network & Storage — Hikvision DS-PDSMK-S-WB Ax Pro Wireless Photoelectric Smoke Sensor Detector
FeatureDetail
Transmission Method Two-Way RF Wireless
Transmission Frequency 433MHz
Transmission Security AES-128 Encryption
Transmission Range (Free Space) 800m
Enrolling Method Power up, Remote ID, QR Code

§ 04Why choose this

Built for the way you actually use the DS-PDSMK-S-WB

Fire warning that reaches you anywhere

Unlike a standalone smoke alarm, it alerts your AX PRO system and your phone, so you know about smoke at home even when you are out or asleep.

A decade of protection, no upkeep

A sealed 10-year battery means you fit it and forget it for years, with a low-battery warning to the panel near the end of its life.

Loud local alarm too

A built-in 85 dB sounder wakes and alerts people in the room, and through the system it can set off other sirens as well.

Secure, monitored wireless

Two-way 433 MHz with AES-128 encryption keeps the link to the panel reliable, and the detector reports its own health back to the hub.

§ 05Where it fits

Right at home in these scenarios

Homes

Add monitored fire warning to bedrooms, hallways and living areas alongside your intruder detection, all on one app.

Holiday homes and rentals

Get smoke alerts on your phone for a property you are not living in, so you can act fast if there is a problem.

Small business

Cover a shop, office or store room with fire warning that reports to staff and any monitoring centre out of hours.

Whole-system alerts

Link smoke events into the AX PRO system so they can trigger sirens and notifications across the property.

§ 06Setup

Installation & setup

01

What's in the box

One DS-PDSMK-S-WB wireless smoke detector with a sealed battery and ceiling-mount hardware. A compatible Hikvision AX PRO alarm system is required and not included.

02

Installation requirements

Mount the detector on the ceiling in or near the area to be protected, following smoke-alarm placement guidance, and enrol it to your AX PRO panel by power-up, remote ID or QR code. Test it after enrolment and keep it within reliable wireless range of the panel or add a repeater on a large property. It complements, and does not replace, the compliant mains-powered smoke alarms required by regulation.

§ 07Questions

Frequently asked about the DS-PDSMK-S-WB

Q.01

What kind of smoke detector is the DS-PDSMK-S-WB?
It is a wireless photoelectric smoke detector. Photoelectric sensing responds well to the slow, smouldering smoke that most house fires start with, and the detector both sounds its own alarm and signals your AX PRO alarm system.
Q.02

How is it different from a standalone smoke alarm?
As well as its own 85 dB sounder, it connects to the Hikvision AX PRO system over wireless, so a smoke event also alerts the control panel, pushes a notification to your phone through the app, and can report to a monitoring centre. A standalone smoke alarm only sounds locally.
Q.03

How loud is the alarm?
Its built-in sounder produces 85 dB or more measured at three metres, which is loud enough to alert and wake people in the area. Through the AX PRO system it can also trigger other sirens and notifications.
Q.04

How long does the battery last and can I replace it?
It uses a sealed CR17450 lithium battery rated for up to 10 years of standby. The battery is not replaceable, so at the end of its life you replace the whole detector, which is normal for long-life sealed smoke alarms. It reports a low-battery status before then.
Q.05

Where should it be installed?
It is a ceiling-mount detector for indoor use. Mount it on the ceiling in or near the area you want to protect, following the placement guidance for smoke alarms, and keep it within reliable wireless range of the AX PRO panel.
Q.06

Which systems does it work with?
It works with Hikvision AX PRO wireless alarm systems, such as the DS-PWA96-M-WB control panel and the DS-PWA96-Kit. It enrols to the AX PRO hub like other wireless devices and is not a standalone product.
Q.07

Does it replace the smoke alarms required by law?
No. It adds smart, monitored fire warning to your security system, but it complements rather than replaces the mains-powered smoke alarms required by your state's building regulations. Keep your compliant smoke alarms in place.

§ 09Bundles

Recommended packages