Hikvision DS-PR1-WB AX Pro Wireless Repeater
Skip to product information
1
/
of
1
Vendor:
Hikvision
Hikvision DS-PR1-WB AX Pro Wireless Repeater
SKU: DS-PR1-WB
Description
The Hikvision DS-PR1-WB is a wireless repeater for Hikvision AX PRO alarm systems. It relays the 433 MHz two-way signal between the control panel and distant detectors, so devices in a far corner, a detached building or behind dense walls stay reliably connected. It is mains powered with a built-in battery for backup, and supports PIRCAM image-verification detectors.
Key points
- Extends AX PRO 433 MHz two-way wireless range, up to 800 m open area
- Supports PIRCAM image-verification detectors
- 433 MHz two-way wireless with AES-128 encryption; auto-pairing
- Mains powered (100-240 VAC) with built-in Li battery
- Up to ~35 hours' battery backup at normal temperature
- Three status LEDs; front and rear tamper; wall mount
Regular price
$124.15 AUD
Sale price
$124.15 AUD
Regular price
$184.00 AUD
Sale
32.53%
$59.85 AUD
(32.53%)
Delivery, warranty & returns · 3-year warranty · shipped from Australian stock
- Tracked delivery on every order. The tracking number is emailed as soon as it ships.
- Metro delivery: 2–4 business days. Regional areas may take longer. Free standard shipping over $300, flat $25 under.
- 3-year warranty on cameras and recorders, back-to-base, plus your Australian Consumer Law rights.
- 30-day returns on unopened items. Faulty on arrival? We cover return shipping.
- Genuine Australian stock. Never grey imports. Prices include GST.
In stock
No reviews
Hikvision DS-PR1-WB AX Pro Wireless Repeater
1
/
of
1
All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Metro delivery usually takes 2–4 business days after dispatch, and regional areas may take longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
01Overview
What the DS-PR1-WB is
The Hikvision DS-PR1-WB is a wireless repeater for the AX PRO alarm range. It sits between the control panel and the system's wireless detectors and relays their 433 MHz two-way signals, which extends reliable coverage to devices that are too far from the hub or are blocked by distance, dense walls or a detached building. Placed at the edge of the panel's reliable range, it gives detectors beyond that point a strong path back to the panel.
It uses 433 MHz two-way wireless with AES-128 encryption, reaches up to 800 metres in open area, supports auto-pairing, and importantly supports PIRCAM detectors so image-verification still works across the extended range. Three LEDs show register/signal, power and fault status, and front and back tamper protection alerts the system if it is opened or removed.
Unlike battery detectors, the repeater is mains powered on 100 to 240 VAC and has a built-in lithium battery that gives up to about 35 hours of backup at normal temperature if the mains fails. Note that the battery cannot charge below 10 C and its backup time is significantly reduced in the cold, so keep it in a temperate spot and make sure the adapter stays connected. It mounts on a wall, measures 150 x 150 x 25 mm and weighs 372 g. It is genuine Australian Hikvision stock with local warranty and support.
02Engineering
DS-PR1-WB specifications
- Extends AX PRO 433 MHz two-way wireless range (up to 800 m open area)
- Supports PIRCAM image-verification detectors across the extended range
- 433 MHz two-way wireless with AES-128 encryption
- Auto-pairing for straightforward setup
- Mains powered (100-240 VAC) with built-in lithium battery
- Up to about 35 hours' backup at normal temperature
- Three LEDs show register/signal, power and fault status
- Front and rear tamper protection; wall mount
- 150 x 150 x 25 mm, 372 g; genuine Australian Hikvision stock
- Supports PIRCAM image-verification detectors across the extended range
- 433 MHz two-way wireless with AES-128 encryption
- Auto-pairing for straightforward setup
- Mains powered (100-240 VAC) with built-in lithium battery
- Up to about 35 hours' backup at normal temperature
- Three LEDs show register/signal, power and fault status
- Front and rear tamper protection; wall mount
- 150 x 150 x 25 mm, 372 g; genuine Australian Hikvision stock
03Full datasheet
Detailed specifications
Network & Storage
| Feature | Detail |
|---|---|
| RF frequency | 433 MHz |
| RF method | Two-way communication |
| RF modulation | 2GFSK |
| RF distance | 800 m (open area) |
| Wireless security | AES-128 |
Event & Alarm
| Feature | Detail |
|---|---|
| Auto paring | Supported |
| Tamper-Proof | 1, front and back |
| PIRCAM paring | Supported |
Interface
| Feature | Detail |
|---|---|
| Serial port | 2, for debug |
| Power switch | 1 |
| LEDs status | 3, Register/Signal (Green/Red), Power (Green), Fault (Amber) |
General & Environment
| Feature | Detail |
|---|---|
| Battery type | Built in Battery Li |
| Power supply | 100 VAC to 240 VAC |
| Operation humidity | 10% to 90% |
| Operation temperature | -10°C to +55°C (The battery can not be charged at temperature lower than 10°C, please make sure the adapter is connected) |
| Battery life span | Up to 35 hours at normal temperature (The battery working time can be significantly reduced at low temperatures) |
| Installation method | Wall mounting |
| Dimension(WxHxD) | 150 mm × 150 mm × 25 mm |
| Shell material | Plastic |
| Color | White |
| Weight | 372 g |
| Network & Storage — RF frequency | 433 MHz |
|---|---|
| Network & Storage — RF method | Two-way communication |
| Network & Storage — RF modulation | 2GFSK |
| Network & Storage — RF distance | 800 m (open area) |
| Network & Storage — Wireless security | AES-128 |
| Event & Alarm — Auto paring | Supported |
| Event & Alarm — Tamper-Proof | 1, front and back |
| Event & Alarm — PIRCAM paring | Supported |
| Interface — Serial port | 2, for debug |
| Interface — Power switch | 1 |
| Interface — LEDs status | 3, Register/Signal (Green/Red), Power (Green), Fault (Amber) |
| General & Environment — Battery type | Built in Battery Li |
| General & Environment — Power supply | 100 VAC to 240 VAC |
| General & Environment — Operation humidity | 10% to 90% |
| General & Environment — Operation temperature | -10°C to +55°C (The battery can not be charged at temperature lower than 10°C, please make sure the adapter is connected) |
| General & Environment — Battery life span | Up to 35 hours at normal temperature (The battery working time can be significantly reduced at low temperatures) |
| General & Environment — Installation method | Wall mounting |
| General & Environment — Dimension(WxHxD) | 150 mm × 150 mm × 25 mm |
| General & Environment — Shell material | Plastic |
| General & Environment — Color | White |
| General & Environment — Weight | 372 g |
04Why choose this
Built for the way you actually use the DS-PR1-WB
Keeps image verification working
Because it supports PIRCAM detectors, the photos those detectors capture still reach the panel across the extended range, not just simple alarms.
Backup through outages
Mains power with a built-in lithium battery keeps the repeater working for up to about 35 hours if the power fails, so coverage holds during a blackout.
Simple to add
Auto-pairing and wall mounting make it straightforward to drop into an existing AX PRO system where you need more reach.
05Where it fits
Right at home in these scenarios
Large homes and acreage
Reach detectors in distant rooms, a granny flat or across a big floor plan where the panel's signal alone is marginal.
Detached garages and sheds
Extend coverage to a garage, shed or workshop set away from the main building.
Solid-wall buildings
Push the signal through double-brick, rendered or multi-storey construction that weakens wireless range.
Commercial sites
Cover offices, retail or warehouse areas where distance or layout leaves wireless detectors short of reliable signal.
06Setup
Installation & setup
-
01
What's in the box
One DS-PR1-WB wireless repeater with power adapter and mounting hardware. A compatible Hikvision AX PRO alarm system is required and not included.
-
02
Installation requirements
Mount the repeater on a wall roughly midway between the panel and the detectors that need more range, in a temperate spot near a power point, and connect the mains adapter. Enrol it to your AX PRO panel using auto-pairing, then check that the affected detectors now report strong signal strength and stable supervision. Keep the adapter connected at all times so the backup battery stays charged, and avoid cold locations where charging and runtime are reduced.
08Questions
Frequently asked about the DS-PR1-WB
Q.01
What does the DS-PR1-WB repeater do?
It relays the wireless signals between your AX PRO panel and its detectors, extending reliable coverage to devices that are too far from the hub or blocked by distance or thick walls. It is the answer when a detector in a far room, garage or shed keeps dropping out.
Q.02
When do I need a repeater?
Add one when a wireless device is near or beyond the edge of the panel's reliable range, or when walls, floors or a detached building weaken the signal. If detectors report low signal strength or intermittent supervision faults, a repeater placed between them and the panel usually fixes it.
Q.03
Does it work with PIRCAM cameras?
Yes. It supports PIRCAM image-verification detectors, so the photos those detectors capture still get through when they are connected via the repeater, not just basic alarm signals.
Q.04
How is it powered, and does it keep working in a blackout?
It is mains powered on 100-240 VAC and has a built-in lithium battery that provides up to about 35 hours of backup at normal temperature if the power fails. Keep the adapter connected, as the battery is there for backup rather than as the primary supply.
Q.05
Does the cold affect it?
Yes. The built-in battery cannot charge at temperatures below 10 C, and its backup time is significantly reduced in the cold. Mount it somewhere temperate and make sure the mains adapter stays connected so it can charge and operate normally.
Q.06
Which systems is it compatible with?
It works with Hikvision AX PRO wireless alarm systems, such as the DS-PWA96-M-WB control panel and the DS-PWA96-Kit. It enrols to the AX PRO hub like other devices and is not a standalone product.
Q.07
Is the wireless connection secure?
Yes. It uses 433 MHz two-way wireless with AES-128 encryption, so the relayed signals between the detectors and the panel stay protected, and the two-way link lets the panel supervise the repeater and its devices.
Buying from Smarket
Is your Hikvision, Dahua, HiLook and TP-Link VIGI stock genuine Australian stock?
Yes, 100%. Every Hikvision, Dahua, HiLook and TP-Link VIGI product we sell is a genuine Australian-market model sourced through Australian supply chains — never grey imports. That means factory-sealed units, Australian-region firmware that works with the official apps out of the box, and a full 3-year local warranty.
How long does delivery take?
Metro delivery usually takes 2–4 business days after dispatch, and regional areas may take longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
How much is shipping?
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
What warranty do you offer?
All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
What is your return policy?
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Do you offer installation?
We can connect you with licensed installers in Sydney and Melbourne. Installation typically starts from around $200 per camera depending on cable runs and site conditions. Email sales@smarket.com.au with your address and camera count for a quote.
10Bundles
Recommended packages
Pair with an AX PRO alarm
Use it with a Hikvision AX PRO system such as the DS-PWA96-Kit alarm kit, or build one around the DS-PWA96-M-WB control panel.
Extend image-verification detection
It keeps DS-PDPC12P-EG2-WB PIRCAM detectors connected across distance for photo verification on far zones.
Cover the far reaches
Add detectors and contacts such as a DS-PDP15P-EG2-WB PIR or a DS-PDMC-EG2-WB door contact at the extended range.