Dahua DH-PFA135 Water proof Junction Box
1 1
Dahua

Dahua DH-PFA135 Water proof Junction Box

SKU: PFA135
Description

The Dahua DH-PFA135 is a compact, round water-proof junction box that mounts a round-base Dahua bullet camera and conceals its cabling behind it. The camera fixes to the box, the cable routes inside, and the join stays sealed against the weather for a neat, protected outdoor install.

At a glance
- Compact round water-proof junction box for round-base bullet cameras
- Aluminium build, Φ90.0 x 34.1 mm, M20 (G1/2") thread
- 1.0 kg load bearing, white finish to match Dahua cameras
- Hides and seals the cable join behind the camera
- Supplied with screws, anchors and a waterproof joint
$15.00 AUD $15.00 AUD $15.00 AUD
Business or bulk buyer? Apply for trade pricing →
Found a lower price? We’ll match it →

inc GST + 3 Year Warranty & Support
Free shipping over AUD300

In stock
3-Year WarrantyOn all cameras
Free ShippingOn orders over $300
30-Day ReturnsUnopened items
Fast Delivery1–5 days Australia-wide
Build your setup Build a complete CCTV system

A camera needs an NVR, a hard drive, and cabling to work. Add everything below, or pick a ready-made kit.

Add accessories Optional. Junction box → hides & weatherproofs cable joins (best for outdoors). Brackets → only if mounting on a corner or under eaves. Cable → one per camera; skip if you already have your own.
0
0
0
0
Bundle total: $15.00

§ 01Overview

What the PFA135 is

The Dahua DH-PFA135 is a small, round water-proof junction box for round-base Dahua bullet cameras. It sits between the camera and the wall so the network cable and its connector are hidden and protected inside the box, giving a tidier finish and shielding the most exposed part of an outdoor run from rain and dust.

It is made from aluminium with a white finish to match Dahua camera bodies, measures a compact Φ90.0 mm x 34.1 mm, uses an M20 (G1/2") thread and is rated to carry up to 1.0 kg. As a small mounting accessory its datasheet describes it as water-proof but does not state a numeric IP code, so we describe it as weatherproof for typical sheltered-to-exposed positions rather than quoting a specific rating. Keep the camera within the 1.0 kg load rating.

Despite sometimes being grouped with dome boxes, the PFA135 is intended for round-base bullet cameras such as the HFW2200R, HFW2300R-VF/-Z and various HDCVI HFW models; for dome, turret and eyeball cameras the PFA136 or PFA137 are the correct boxes. The same-size PFA134 covers a similar bullet range, so check which box your specific camera lists before ordering. The kit includes the box, screws, anchors, a waterproof joint and a wrench, and it operates from -40 to +60 degrees C.

§ 02Engineering

PFA135 specifications

- Compact round water-proof junction box for round-base Dahua bullet cameras.

- Aluminium build with a white finish to match Dahua bullet camera bodies.

- Φ90.0 x 34.1 mm with an M20 (G1/2") thread and up to 1.0 kg load bearing.

- Hides the network cable and connector inside the box for a neat, sealed finish.

- Weatherproof construction for sheltered-to-exposed outdoor camera positions.

- Operates from -40 to +60 degrees C across the full range of Australian conditions.

- Supplied with mounting screws, plastic anchors, a waterproof joint and a wrench.

§ 03Full datasheet

Detailed specifications

General & Environment

General & Environment — Dahua DH-PFA135 Water proof Junction Box
FeatureDetail
Model DH-PFA135
Material Aluminum
Dimension Φ90.0mmx34.1mm (Φ3.54”x1.34”)
Inch Thread M20(G1/2”)
Load Bearing 1.0kg(2.2lb)
Weight 0.16kg(0.35lb)
Color White
Operating Temperature -40ºC~+60ºC(-40℉~+140℉)
Humidity 0~90% RH
Applicable Model Please see “Accessory Selection”
Package Information Water-proof junction box *1; M4x12 screw *3; ST4x25 screw *3; Plastic anchor *3; Water-proof joint *1; Wrench *1

§ 04Why choose this

Built for the way you actually use the PFA135

Compact and tidy

A small Φ90 round box that hides the cable join behind a round-base bullet without adding bulk.

Correct for bullets

Intended for round-base bullet cameras, with the PFA136/PFA137 covering dome and turret types.

Protects the connector

Seals the RJ45 join inside the box, shielding the weakest point of an outdoor run.

Ready to install

Supplied with screws, anchors, a waterproof joint and a wrench for a standard wall fit.

§ 05Where it fits

Right at home in these scenarios

Round-base bullet installs

Mount a compact Dahua bullet on a wall with the cable join hidden and sealed.

Tidy home camera runs

Give a residential install a clean finish without an exposed connector at the wall.

Sheltered outdoor positions

Protect the cable join under an eave or on a wall from rain and dust.

Connector protection

Keep the plug and pigtail safe inside a weatherproof box on an outdoor run.

§ 06Setup

Installation & setup

01

Check camera fit

Confirm your round-base bullet model lists the PFA135 in its compatible-mount selection before fitting.

02

Mark and drill

Position the box where the camera will sit, mark the holes, then drill and insert the supplied anchors.

03

Route the cable

Bring the network lead into the box and fit the supplied waterproof joint over it.

04

Mount and finish

Fix the box, tuck the cable join inside, attach the camera and confirm the box is closed and sealed.

§ 07Questions

Frequently asked about the PFA135

Q.01

What is the DH-PFA135 used for?
It is a compact round junction box that mounts a round-base Dahua bullet camera and hides the cabling behind it. The cable join sits sealed inside the box for a neater, more protected install.
Q.02

Which cameras does the PFA135 fit?
It is intended for round-base Dahua bullet cameras such as HFW2200R, HFW2300R-VF/-Z and various HDCVI HFW models. Check your camera's compatible-mount list before ordering, as fit depends on the base.
Q.03

Is the PFA135 for dome or eyeball cameras?
No. Although it is sometimes grouped that way, the PFA135 is for round-base bullet cameras. For dome, turret and eyeball cameras use the PFA136 or PFA137 instead.
Q.04

Is the PFA135 weatherproof?
Its datasheet describes it as water-proof but does not state a numeric IP code, so we describe it as weatherproof for typical sheltered-to-exposed outdoor positions.
Q.05

How much weight can it hold?
It has a load bearing rating of 1.0 kg, which covers typical compact bullet cameras. Keep the camera's weight within that figure.
Q.06

What is the difference between the PFA135 and PFA134?
Both are Φ90 round boxes for a similar range of round-base bullets. The right one depends on which box your specific camera lists, so check its accessory selection.
Q.07

What is in the box?
It comes with the junction box, mounting screws, plastic anchors, a waterproof joint and a wrench for a standard wall install.
Q.08

Do I need a junction box?
It is optional but recommended outdoors. It hides and seals the cable join, protecting the connector and giving a tidier finish than an exposed lead.

§ 09Bundles

Recommended packages

01

Pair with a bullet camera

The PFA135 mounts round-base Dahua bullets such as the 6MP WizSense bullet; check the camera's mount list for fit.

02

For dome and turret cameras

Use the PFA136 black box or the larger PFA137 instead, which are made for dome and turret bodies.