Dahua DH-PFA134 Water proof Junction Box
1 1
Dahua

Dahua DH-PFA134 Water proof Junction Box

SKU: PFA134
Description

The Dahua DH-PFA134 is a compact, round water-proof junction box that mounts a round-base Dahua bullet camera and hides its cabling behind it. The camera fixes to the box, the cable routes inside, and the join stays sealed against weather - a small, tidy upgrade over leaving the connector exposed at the wall.

At a glance
- Compact round water-proof junction box for round-base bullet cameras
- Aluminium and SECC build, Φ90.0 x 35.0 mm, M20 (G1/2") thread
- 1.0 kg load bearing, white finish to match Dahua cameras
- Seals and conceals the cable join behind the camera
- Supplied with screws, anchors and a waterproof joint
$12.00 AUD $12.00 AUD $12.00 AUD
Business or bulk buyer? Apply for trade pricing →
Found a lower price? We’ll match it →

inc GST + 3 Year Warranty & Support
Free shipping over AUD300

In stock
3-Year WarrantyOn all cameras
Free ShippingOn orders over $300
30-Day ReturnsUnopened items
Fast Delivery1–5 days Australia-wide
Build your setup Build a complete CCTV system

A camera needs an NVR, a hard drive, and cabling to work. Add everything below, or pick a ready-made kit.

Add accessories Optional. Junction box → hides & weatherproofs cable joins (best for outdoors). Brackets → only if mounting on a corner or under eaves. Cable → one per camera; skip if you already have your own.
0
0
0
0
Bundle total: $12.00

§ 01Overview

What the PFA134 is

The Dahua DH-PFA134 is a small, round water-proof junction box for round-base Dahua bullet cameras. It mounts between the camera and the wall so the network cable and its connector are hidden and protected inside the box rather than left exposed, giving a neater finish and shielding the most vulnerable part of an outdoor cable run from rain and dust.

It is built from aluminium and SECC steel with a white finish to match Dahua camera bodies, measures a compact Φ90.0 mm x 35.0 mm, uses an M20 (G1/2") thread and is rated to carry up to 1.0 kg. As a small mounting accessory its datasheet describes it as water-proof but does not state a numeric IP code, so we describe it as weatherproof for typical sheltered-to-exposed outdoor positions rather than claiming a specific rating. Keep the camera's weight within the 1.0 kg load rating.

The PFA134 suits round-base bullet models such as the HFW2200R, HFW2300R-VF/-Z and various HDCVI HFW bullets. The closely related PFA135 is the same size for a similar range of bullets, so check which box your specific camera lists before ordering, as fit depends on the base and screw pattern. The kit includes the box, mounting screws, anchors, a waterproof joint and a wrench, and it operates from -40 to +60 degrees C.

§ 02Engineering

PFA134 specifications

- Compact round water-proof junction box for round-base Dahua bullet cameras.

- Aluminium and SECC build with a white finish to match Dahua camera bodies.

- Φ90.0 x 35.0 mm with an M20 (G1/2") thread and up to 1.0 kg load bearing.

- Hides the network cable and connector inside the box for a neat, sealed finish.

- Weatherproof construction for sheltered-to-exposed outdoor camera positions.

- Operates from -40 to +60 degrees C across the full range of Australian conditions.

- Supplied with mounting screws, plastic anchors, a waterproof joint and a wrench.

§ 04Why choose this

Built for the way you actually use the PFA134

Compact and tidy

A small Φ90 round box that hides the cable join behind a round-base bullet without adding bulk.

Matched build

Aluminium and SECC with a white finish that suits Dahua bullet camera bodies.

Protects the connector

Seals the RJ45 join inside the box, shielding the weakest point of an outdoor run.

Ready to install

Supplied with screws, anchors, a waterproof joint and a wrench for a standard wall fit.

§ 05Where it fits

Right at home in these scenarios

Round-base bullet installs

Mount a compact Dahua bullet on a wall with the cable join hidden and sealed.

Tidy home camera runs

Give a residential install a clean finish without an exposed connector at the wall.

Sheltered outdoor positions

Protect the cable join under an eave or on a wall from rain and dust.

Connector protection

Keep the plug and pigtail safe inside a weatherproof box on an outdoor run.

§ 06Setup

Installation & setup

01

Check camera fit

Confirm your round-base bullet model lists the PFA134 in its compatible-mount selection before fitting.

02

Mark and drill

Position the box where the camera will sit, mark the holes, then drill and insert the supplied anchors.

03

Route the cable

Bring the network lead into the box and fit the supplied waterproof joint over it.

04

Mount and finish

Fix the box, tuck the cable join inside, attach the camera and confirm the box is closed and sealed.

§ 07Questions

Frequently asked about the PFA134

Q.01

What is the DH-PFA134 used for?
It is a compact round junction box that mounts a round-base Dahua bullet camera and hides the cabling behind it. The cable join sits sealed inside the box for a neater, more protected install.
Q.02

Which cameras does the PFA134 fit?
It suits round-base Dahua bullet cameras such as HFW2200R, HFW2300R-VF/-Z and various HDCVI HFW bullets. Fit depends on the camera base, so check your camera's compatible-mount list before ordering.
Q.03

Is the PFA134 weatherproof?
Its datasheet describes it as water-proof but does not state a numeric IP code, so we describe it as weatherproof. It suits typical sheltered-to-exposed outdoor positions; for a rated IP66 box for a bullet, the PFA121 is a larger option.
Q.04

How much weight can it hold?
It has a load bearing rating of 1.0 kg. Keep your camera's weight within that figure, which covers typical compact bullet cameras.
Q.05

What is the difference between the PFA134 and PFA135?
Both are small round boxes of the same Φ90 size for a similar range of round-base bullets. The right one depends on which box your specific camera lists, so check its accessory selection before ordering.
Q.06

What thread does it use?
It uses an M20 (G1/2") thread, which is the smaller thread used on Dahua's compact junction boxes for round-base cameras.
Q.07

What is in the box?
It comes with the junction box, mounting screws, plastic anchors, a waterproof joint and a wrench, giving you the fixings for a standard wall install.
Q.08

Do I need a junction box for my bullet camera?
It is optional but recommended outdoors. It hides and seals the cable join, protecting the connector from weather and giving a tidier finish than an exposed lead.

§ 09Bundles

Recommended packages

01

Pair with a bullet camera

The PFA134 mounts round-base Dahua bullets such as the 6MP vari-focal bullet; check the camera's mount list for fit.

02

Similar junction boxes

Compare with the same-size PFA135, or step up to the IP66 PFA121 for larger bullets.