TP-Link Cameras

The TP-Link VIGI SP6020 is an intelligent solar power system that runs a single VIGI security camera completely off-grid. It pairs a 60 W photovoltaic panel with a 20.8 Ah / 10.8 V lithium battery and a smart controller, so a 4G camera can operate with no mains power and no fixed wiring — on a sunny day it charges to full in about 1.8 days and can keep a camera running for up to about 4.3 days through consecutive overcast weather. A camera is not included; the SP6020 is the power system on its own.

Key points
- 60 W solar panel + 20.8 Ah / 10.8 V lithium battery; sized for one VIGI camera
- Up to about 4.3 days runtime on overcast days; about 1.8 days to full charge in sun
- Intelligent auxiliary heating for reliable charging from about -30 to 60°C
- Three DC outputs; six-position 5-55° angle adjustment; IP66; 500+ cycles
- Remote power statistics, low-battery alerts and reboot via the VIGI app; camera not included

This TP-Link VIGI solar kit is a higher-capacity off-grid 4G surveillance solution: the VIGI C540-4G 4MP full-colour pan-tilt camera paired with the VIGI SP9030 intelligent solar power system (a 90 W solar panel and a 30 Ah lithium battery with an MPPT controller). It needs no mains power and no fixed internet — the camera runs on solar and connects over the 4G mobile network using your own SIM, so it suits farms, building sites, remote gates and any spot beyond reach of power and Wi-Fi. With more panel and battery than the SP6020 kit, it can keep a single 4G camera running for roughly a week through overcast weather.

Kit includes
- 1 × VIGI C540-4G 4MP full-colour 4G pan-tilt network camera, IP66
- 1 × VIGI SP9030 solar power system: 90 W panel + 30 Ah / 10.8 V lithium battery
- MPPT charge controller (about 20% more efficient than PWM), intelligent auxiliary heating
- 4G needs a Nano SIM (not included); microSD up to 256 GB (not included)
- 3-year warranty and local support

The TP-Link VIGI SP18090 is the highest-capacity intelligent solar power system in the VIGI range, for off-grid sites that need to run more than one camera or a power-hungry PTZ. It pairs two 90 W photovoltaic panels (180 W total) with a 93.6 Ah / 10.95 V lithium battery built from three modular cells, and provides three DC outputs including a stable 12 V feed for high-speed PTZ cameras. Its modular design splits into the controller, the battery cells, the dual panels and the 180 W mount for easier transport and service. A camera is not included.

Key points
- 2 × 90 W panels (180 W total) + 93.6 Ah / 10.95 V lithium battery (3 modular cells)
- Built for multi-camera and high-speed PTZ off-grid setups
- Three DC outputs, including a stable 12 V feed (output #3) for PTZ cameras
- Intelligent auxiliary heating; six-position angle adjustment; 500+ cycles
- IP66 controller and IP67 panel; remote management via the VIGI app; camera not included

This TP-Link VIGI solar kit is a fully off-grid 4G surveillance solution: the VIGI C540-4G 4MP full-colour pan-tilt camera paired with the VIGI SP6020 intelligent solar power system (a 60 W solar panel and a 20.8 Ah lithium battery). It needs no mains power and no fixed internet — the camera runs on solar and connects over the 4G mobile network using your own SIM, so it suits farms, building sites, remote gates and any spot beyond reach of power and Wi-Fi. The camera pans and tilts to cover a wide area with records in full colour, and has two-way audio with active deterrence.

Kit includes
- 1 × VIGI C540-4G 4MP full-colour 4G pan-tilt network camera, IP66
- 1 × VIGI SP6020 solar power system: 60 W panel + 20.8 Ah / 10.8 V lithium battery
- Intelligent auxiliary heating, six-position angle adjustment, 3 × DC output ports
- 4G needs a Nano SIM (not included); microSD up to 256 GB (not included)
- 3-year warranty and local support

The TP-Link VIGI VJB-300 is a round aluminium junction box that mounts behind a VIGI turret or dome camera to hide the cable join and connectors. It is compatible with all VIGI cameras, has a weatherproof housing for indoor or outdoor use, and fits on a wall or ceiling. The box finishes a camera install neatly and keeps the RJ45 plug, waterproof gland and any spare cable tucked out of sight and out of the weather.

Key points
- Junction box for VIGI turret and dome cameras; compatible with all VIGI cameras
- Aluminium alloy body in VIGI white; weatherproof for indoor or outdoor use
- Hides the cable join, RJ45 plug and waterproof gland behind the camera
- Mounts on a wall or ceiling; supplied with mounting and waterproof accessories
- Round form factor, 125 mm diameter; about 364 g
- Genuine TP-Link stock with a 3-year warranty

The TP-Link VIGI VJB-240 is an aluminium wall-mount bracket that extends a VIGI dome, turret or fisheye camera out from a wall and routes the cable neatly through the arm. It suits most VIGI cameras (check the VIGI accessory compatibility list for your model), has a weatherproof VIGI-white finish, and gives a camera a clean stand-off mount on eaves, soffits and walls where a flush mount will not give the right angle or cable path.

Key points
- Wall-mount arm bracket for VIGI dome, turret and fisheye cameras
- Compatible with most VIGI cameras - check the VIGI accessory compatibility list
- Routes the camera cable through the arm for a tidy, weather-protected install
- Aluminium alloy and SGCC steel in VIGI white; weatherproof for outdoor use
- Stands a camera off a wall to set the viewing angle and clear the eave
- About 533 g; 181 x 134 x 59 mm; supplied with mounting accessories

The TP-Link VIGI NVR4032H is a 32-channel network video recorder for larger and multi-area sites. It records cameras up to 8MP (4K) with H.265+ compression, has independent 4K HDMI and VGA outputs for two separate screens, and takes four surveillance hard drives of up to 16TB each — up to 64TB of 24/7 storage. Unlike the PoE VIGI recorders, the NVR4032H has no built-in PoE ports, so cameras are powered by an external PoE switch (or their own supply) and join the same network as the recorder. A hard drive is not included.

Key points
- 32 channels; records up to 8MP (4K); H.265+ compression; 320 Mbps bandwidth
- No built-in PoE — use an external PoE switch to power cameras
- Independent 4K HDMI and VGA outputs for two separate screens
- Four SATA bays, up to 16TB each (up to 64TB total) — drive not included
- Built-in face recognition and smart search; ONVIF Profile S/T; 3-year warranty

The TP-Link VIGI NVR2016H-16P is a 16-channel network video recorder with sixteen built-in PoE+ ports, so each VIGI IP camera connects and is powered over a single network cable straight to the recorder — no separate switch or injectors needed for a 16-camera system. It records up to 8MP (4K) footage with H.265+ compression, outputs 4K over HDMI plus a second VGA screen, and takes two surveillance hard drives of up to 16TB each for 24/7 continuous recording. A hard drive is not included, so you can size storage to the job.

Key points
- 16 channels with 16 built-in PoE+ ports (one cable per camera, up to 30 W per port)
- Records up to 8MP (4K); H.265+ compression; ONVIF Profile S/T
- 4K HDMI plus VGA output, independent or simultaneous
- Two SATA bays, up to 16TB each (up to 32TB total) — drive not included
- VIGI app, Security Manager and web management; 3-year warranty