Visitor communication & entrance systems
Intercom Accessories
Find dedicated Hikvision and Dahua intercom accessories, including mounting housings, rain shields, table brackets, modular controls, distributors and power supplies. Match the full model number and system generation: these parts are not universal camera or alarm accessories.
Intercom Accessories
Dahua VTM115 Surface Mount Box
The Dahua VTM115 is a surface mounting box made from 2 mm AL5052 aluminium. It measures 129 mm by 95 mm by 28.5 mm and provides a mounting enclosure for a compatible door station. Plan the cable route, fixing points and sealing arrangement before installation, and confirm that the selected station matches the enclosure.
Dahua VTM116-01 Flush Mount Box
The Dahua VTM116-01 is an ADC12 mounting enclosure for a compatible flush-mounted door station. The front measures 138 mm by 240 mm by 35 mm; the rear and specified wall opening measure 120.8 mm by 222.7 mm by 33 mm. Confirm the station fit and wall construction before preparing the opening, and plan the cable routing and sealing for the entrance assembly.
Hikvision DS-KD-ACF2/S 2-Module Flush Mount
The Hikvision DS-KD-ACF2/S is a 2-module flush mounting assembly for a compatible Hikvision modular door station. It uses a stainless-steel cover and plastic gang box. The assembly includes the gang box, cover, screws and connection lines. The gang box measures 237 mm × 135 mm × 56 mm. Select the door-station modules to match the available positions and confirm the mounting layout before installation.
Hikvision DS-KAD706Y-P Two-Wire Distribution Unit
The Hikvision DS-KAD706Y-P is a two-wire IP distribution unit for a compatible Y-series video intercom system. It provides six two-wire device interfaces with power supply, two cascade interfaces and an RJ45 connection. The cascade interfaces support DS-KAD704Y, DS-KAD706Y and DS-KAD706Y-S series units. It uses a 24 VDC input and DIN-rail mounting. The channel specifications differ: CH1 to CH5 are below 6 W each, while CH6 is below 16 W. Select the compatible door and indoor stations and a suitable power source for the complete system. This is not a general-purpose PoE network switch.
Hikvision DS-KD-DIS 3.5-inch Intercom Display Module
The Hikvision DS-KD-DIS is a display module for a compatible modular video door station. Its 3.5-inch TFT screen has 320 × 480 resolution and uses four physical buttons for interaction. It can display dialled numbers, PIN-code entry and a contact list of up to 2000 entries. The module has an RS-485 interface, IP65 protection and 2.5 W power consumption. Select a supported main station and a mounting assembly with enough module positions. This is a button-operated display extension, not a touchscreen, standalone camera or complete door station.
Hikvision DS-KD-KK/S Steel Six-Button Intercom Module
The Hikvision DS-KD-KK/S is a stainless steel nametag module with six call buttons for a compatible modular video door station. Backlighting helps make the labelled calling positions visible at the entrance. The module has IP65 and IK07 protection and uses 12 VDC module-system power, with 0.8 W consumption. It measures 98.5 mm by 100 mm by 34.2 mm and has a net weight of 265 g. Select the supported main station and a mounting assembly with enough positions. This is the stainless steel /S extension, not the standard DS-KD-KK or a standalone door station.
Hikvision DS-KD-INFO Intercom Information Module
The Hikvision DS-KD-INFO is an information module for a compatible modular video door station. It provides an entrance information panel with automatic backlight switching according to environmental conditions. The module has an RS-485 interface, IP65 protection and 1.5 W power consumption. It measures 98.42 mm by 94.4 mm by 33.8 mm. Select a supported main station and mounting frame for the complete assembly. This is an information panel, not a touchscreen, call-button module, camera or standalone intercom station.
Hikvision DS-KD-TDM 4-inch Intercom Touchscreen Module
The Hikvision DS-KD-TDM is a touch-display extension module for a compatible modular video door station. Its 4-inch IPS touchscreen has 480 × 480 resolution and can present number dialling, PIN entry, a contact list and advertising information. An M1 card reader provides an additional access method, and the module stores up to 2000 contacts. It is supplied with 12 VDC by the main module and consumes up to 4 W. Select the compatible main station and mounting assembly separately. This product is not a standalone video door station or an indoor intercom monitor.
Hikvision DS-KD-BK Intercom Blank Module
The Hikvision DS-KD-BK is a blank module for a compatible modular video door station. It fills an unused module position when the selected entrance layout does not require another camera, button, reader or display module. The blank module has IP65 protection and measures 98.5 mm by 100 mm by 33.7 mm. Select the mounting frame and active door-station modules to match the complete assembly. This is a filler module, not an electronic reader, camera or calling unit.
Hikvision DS-KD-KP Modular Intercom Keypad
The Hikvision DS-KD-KP is a keypad module for a compatible modular video door station. It adds PIN-code entry for door release and the ability to call an indoor station, with backlighting behind the keypad buttons. The module has an RS-485 interface, supports surface or flush mounting within the appropriate assembly, and carries an IP65 protection rating. It measures 98.5 mm by 100 mm by 34.2 mm and weighs 265 g. Select the compatible main door station and mounting frame separately; this keypad is an extension module, not a standalone network door station or an alarm-system keypad.
Hikvision DS-KD-IN Intercom Status Indicator Module
The Hikvision DS-KD-IN is a status-indicator module for a compatible modular video door station. Its three indicators show calling, door-open and two-way audio states from the configured system. The module has an RS-485 interface, IP65 protection and power consumption up to 2 W. It measures 98.5 mm by 100 mm by 33.7 mm and has a net weight of 165 g. Select the main station and mounting frame for the complete entrance assembly. This module displays system status; it does not provide its own microphone, speaker, camera or door-lock relay.
Hikvision DS-KD-KP/S Stainless Steel Intercom Keypad
The Hikvision DS-KD-KP/S is a stainless steel keypad module for a compatible modular video door station. Its twelve buttons support PIN-code entry for door release and calling an indoor station, with backlighting for keypad visibility. The module is rated IP65 and IK07, measures 98.2 mm by 100.2 mm by 33.7 mm and has a net weight of 190 g. It uses 12 VDC supplied through the module system. Select a supported main station and mounting assembly separately. This is the stainless steel /S version, not the standard DS-KD-KP or a standalone access controller.
Intercom Accessories buying guide
Find the accessory your intercom needs
Mounting housings, frames and rain shields
Choose surface or flush mounting first, then match the housing to the door-station family and module count. The Hikvision DS-KD-ACW1 single-module housing is one example of a model-specific mount. A two- or three-module installation requires the corresponding supported arrangement. Rain shields and protective covers also need to match the device and installation format.
Modular controls and displays
Modular intercom keypads, card readers, nametag buttons, display modules and blank modules form part of a supported modular station. They do not operate as complete door stations by themselves. Verify compatibility with the main module, connecting hardware, housing and firmware before expanding a system.
Distributors and power supplies
Two-wire distributors and switches have specific roles in their system family. Verify the model, topology, permitted device count and power arrangement in the installation documentation. Intercom power supplies also need the correct voltage, output capacity and supported application; similar connector shapes are not proof of compatibility.
Indoor station table brackets
A table bracket lets a supported indoor station sit on a desk or counter. Match it to the exact monitor model. Do not assume that two monitors with the same screen size use the same fixing points.
Send the model numbers before ordering
If you are unsure, contact Smarket with the station and accessory model numbers, whether the system is IP or two-wire, and whether you need a surface, flush or desk installation. Check the product page for the supplied items.
Return to door stations, indoor monitors or complete kits to choose the main equipment. The intercom systems overview explains how these categories fit together.
Need help checking a system?
Use the exact product listings and manufacturer installation documents for compatibility. Contact Smarket with the model numbers you plan to connect. Check shipping information and the return policy before ordering.
Frequently asked questions
Are intercom accessories universal?
No. Match the manufacturer, exact station or monitor model, system generation and mounting format. Compatibility must be established for the particular accessory and device.
Does a rain shield make any intercom suitable for outdoor use?
No. The device must already meet the environmental and installation requirements for its location. A compatible rain shield is an accessory, not a replacement for the specified protection rating or installation method.
Can I use a two-wire distributor as a standard PoE network switch?
Do not assume so. A two-wire distributor belongs to a specific intercom system and wiring design. Use equipment expressly supported by the station, monitor and manufacturer installation instructions.
Do keypad and card-reader modules work on their own?
Modular intercom accessories generally require a compatible main station module and supported connections. They are not complete calling stations or standalone access systems unless the product documentation explicitly says otherwise.