Visitor communication & entrance systems
Intercom Accessories
Find dedicated Hikvision and Dahua intercom accessories, including mounting housings, rain shields, table brackets, modular controls, distributors and power supplies. Match the full model number and system generation: these parts are not universal camera or alarm accessories.
Intercom Accessories
Hikvision DS-KABV6133-RS Door Station Rain Shield
The Hikvision DS-KABV6133-RS is an SGCC rain shield for a compatible surface-mounted villa door station. It measures 189 mm by 109 mm by 45.47 mm. Check the exact station and shield fit before preparing the wall. Allow access to the entrance controls and cable entry.
Dahua VTNS2003B-2-A 2-Wire Intercom Switch
The Dahua VTNS2003B-2-A is a two-wire intercom switch with Ethernet connectivity. It provides two RJ45 ports, two two-wire cascade ports and a two-wire device connection. The unit requires a compatible 48 VDC power supply and mounts on a guide rail.
Hikvision DS-KABV8113-RS Flush-Mount Door Station Shield
The Hikvision DS-KABV8113-RS is the flush-mount protective shield for a compatible KV8113 series villa door station. The SECC enclosure measures 186.15 mm by 97 mm by 31.05 mm. This listing follows the flush-mount version. Confirm the wall recess and station model before ordering the entrance mounting components.
Hikvision DS-KABV6113-RS Door Station Rain Shield
The Hikvision DS-KABV6113-RS is a PC plastic protective shield for a surface-mounted KV6103 or KV6113 series villa door station. Its shaped cover surrounds the compatible entrance unit. Check the complete station model and mounting arrangement. Prepare the cable route and any site sealing needed around the assembly.
Hikvision DS-KABD9203-RS Door Station Rain Shield
The Hikvision DS-KABD9203-RS is an SGCC rain shield for a surface-mounted KD9203 series door station. It measures 377 mm by 128 mm by 86 mm. Match the door station and shield before preparing the wall, and plan cable access and the required sealing for the complete installation.
Hikvision DS-KAB11-D Door Station Protective Shield
The Hikvision DS-KAB11-D is a SUS304 stainless-steel protective shield for a compatible DS-KD8023 door station. It measures 424 mm by 149 mm by 98 mm. Check the station model and fixing layout. The shield has no insulation, which must be considered in the entrance installation.
Hikvision DS-KABH8350-T Indoor Station Table Bracket
The Hikvision DS-KABH8350-T is a table bracket for KH8350 series indoor stations. Its construction combines SUS430 steel and silica gel for a supported desktop installation. Check the exact monitor attachment and the supplied bracket dimensions. Allow for the cable connection and viewing position on the desk.
Hikvision DS-KABV6114-RS Door Station Rain Shield
The Hikvision DS-KABV6114-RS is a PC protective shield for surface-mounted KV6114 or KV6124 series villa door stations. It measures 194.49 mm by 84.62 mm by 47 mm. Match the entrance station to the shield. Plan the fixing points and cable entry without obstructing the station interface.
Hikvision DS-KABD8003-RS1/S Single-Module Rain Shield
The Hikvision DS-KABD8003-RS1/S is a stainless-steel protective shield for a single-module surface-mounted door station. It suits compatible DS-KD8003-IME1 or DS-KD8003-IME2 installations. Match the shield to the single-module frame and entrance unit. Leave room for the cable entry and mounting hardware.
Hikvision DS-KABV9503-RS Door Station Rain Shield
The Hikvision DS-KABV9503-RS is a protective shield for a surface-mounted DS-KV9503-WBE1 villa door station. It provides a cover around the compatible entrance unit. Check the station model and supplied shield revision before preparing the fixing positions. Allow access to the station controls and wiring.
Hikvision DS-KAB13-D Door Station Protective Shield
The Hikvision DS-KAB13-D is a SUS304 stainless-steel protective shield for a compatible DS-KD3003 door-station installation. Its body measures 360 mm by 128 mm by 86 mm. Check the entrance-station model and mounting layout. This shield has no insulation, so account for that in the installation design.
Hikvision DS-KABV6113-A 30-Degree Door Station Bracket
The Hikvision DS-KABV6113-A is an angled wall bracket for a compatible KV6 series villa door station. It changes the mounting angle by 30 degrees and uses PC reinforced with 10% fibreglass. Choose the angle to suit the approach to the doorway. Confirm the exact station fit and leave clearance for the connecting cables.
Intercom Accessories buying guide
Find the accessory your intercom needs
Mounting housings, frames and rain shields
Choose surface or flush mounting first, then match the housing to the door-station family and module count. The Hikvision DS-KD-ACW1 single-module housing is one example of a model-specific mount. A two- or three-module installation requires the corresponding supported arrangement. Rain shields and protective covers also need to match the device and installation format.
Modular controls and displays
Modular intercom keypads, card readers, nametag buttons, display modules and blank modules form part of a supported modular station. They do not operate as complete door stations by themselves. Verify compatibility with the main module, connecting hardware, housing and firmware before expanding a system.
Distributors and power supplies
Two-wire distributors and switches have specific roles in their system family. Verify the model, topology, permitted device count and power arrangement in the installation documentation. Intercom power supplies also need the correct voltage, output capacity and supported application; similar connector shapes are not proof of compatibility.
Indoor station table brackets
A table bracket lets a supported indoor station sit on a desk or counter. Match it to the exact monitor model. Do not assume that two monitors with the same screen size use the same fixing points.
Send the model numbers before ordering
If you are unsure, contact Smarket with the station and accessory model numbers, whether the system is IP or two-wire, and whether you need a surface, flush or desk installation. Check the product page for the supplied items.
Return to door stations, indoor monitors or complete kits to choose the main equipment. The intercom systems overview explains how these categories fit together.
Need help checking a system?
Use the exact product listings and manufacturer installation documents for compatibility. Contact Smarket with the model numbers you plan to connect. Check shipping information and the return policy before ordering.
Frequently asked questions
Are intercom accessories universal?
No. Match the manufacturer, exact station or monitor model, system generation and mounting format. Compatibility must be established for the particular accessory and device.
Does a rain shield make any intercom suitable for outdoor use?
No. The device must already meet the environmental and installation requirements for its location. A compatible rain shield is an accessory, not a replacement for the specified protection rating or installation method.
Can I use a two-wire distributor as a standard PoE network switch?
Do not assume so. A two-wire distributor belongs to a specific intercom system and wiring design. Use equipment expressly supported by the station, monitor and manufacturer installation instructions.
Do keypad and card-reader modules work on their own?
Modular intercom accessories generally require a compatible main station module and supported connections. They are not complete calling stations or standalone access systems unless the product documentation explicitly says otherwise.