All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Metro delivery usually takes 2–4 business days after dispatch, and regional areas may take longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
Hikvision Video Intercoms
Hikvision DS-KAD7061EY Four-Channel Two-Wire Shunt
The Hikvision DS-KAD7061EY is a compact floor shunt for a compatible two-wire HD indoor-station system. It provides four two-wire indoor-station interfaces, two cascade interfaces and six status indicators. The surface-mounted unit measures 70.6 mm by 60 mm by 25 mm and uses up to 2 W. It does not require its own separate power supply, but the complete intercom system still needs the appropriate power arrangement. Confirm the compatible indoor stations and system wiring before ordering. This is a distribution component, not an indoor monitor or an Ethernet PoE switch.
Hikvision DS-KV6133-WME1-FLUSH 2MP Door Station
The Hikvision DS-KV6133-WME1-FLUSH is the villa door station designated DS-KV6133-WME1/Flush by the manufacturer. It combines a 2 MP camera, built-in card reader, physical call button and visitor audio in an aluminium-alloy casing. Wired Ethernet and 2.4 GHz Wi-Fi provide network options, while standard PoE or 12 VDC supplies power. Direct Hik-Connect calling can be configured without an indoor station. Specify the flush-mount assembly for the entrance and select suitable lock hardware and power. This listing does not promise the surface-version gang box or a complete lock installation.
Hikvision DS-KV6133-WME1-SURFACE 2MP Door Station
The Hikvision DS-KV6133-WME1-SURFACE is the surface-mounted villa door station identified by the manufacturer as DS-KV6133-WME1/Surface. It combines a 2 MP camera, built-in card reader, physical call button and visitor audio in an aluminium-alloy casing. Wired Ethernet and 2.4 GHz Wi-Fi provide network options, while standard PoE or 12 VDC supplies power. Direct Hik-Connect calling can be configured without an indoor station. The surface gang box DS-KABV6133-G/Surface is included; select the lock hardware, power arrangement and any optional rain shield separately. This is the surface version, not the flush-mounted model or a complete lock installation.
Hikvision DS-KD9403-E6 8-inch Face Door Station
The Hikvision DS-KD9403-E6 is an Android-based IP apartment door station with an 8-inch IPS touchscreen and 2 MP camera. It supports face, card, PIN and QR-code access alongside visitor communication through two microphones and two loudspeakers. The display has 1280 × 800 resolution, with infrared supplementary lighting specified up to 3 m. A 12 VDC, 2 A supply powers the station. It supports surface or flush mounting with IP65 protection. Select the power source, mounting arrangement and compatible intercom components separately. A second lock requires a secure module, and the reserved TF-card interface is not an available recording-card feature.
Hikvision DS-KD9203-ME6 Metal Face Door Station
The Hikvision DS-KD9203-ME6 is a metal-front IP apartment door station combining a 4.3-inch colour display with camera-based visitor communication and access control. Residents can use face recognition, M1 cards or PIN codes within the configured system. Two 2 MP cameras and infrared lighting support the entrance view, while a microphone and loudspeaker support conversation. The station provides two lock-control relays and uses a 12 VDC supply. Plan the flush mounting, suitable power source, lock circuits and indoor answering arrangement for the site. This listing is the door station, not a complete apartment intercom installation.
Hikvision DS-KD7003EY-S2 Steel Two-Wire Door Station
The Hikvision DS-KD7003EY-S2 is a two-wire HD door station with a 316L stainless steel panel, 4-inch IPS touchscreen and mechanical keypad. Its 2 MP camera provides a 133° horizontal field of view with WDR and infrared supplementary lighting. A microphone and loudspeaker support visitor conversation, while the keypad supports calling and PIN-code entry. Power comes through a compatible DS-KAD7060EY distribution unit or a 12 VDC input. The two lock-control paths comprise one relay and one DC-pulse output, not two identical relays. Plan the flush mounting and select the compatible indoor station, power arrangement and lock hardware for the complete entrance system.
Hikvision DS-KD-INFO Intercom Information Module
The Hikvision DS-KD-INFO is an information module for a compatible modular video door station. It provides an entrance information panel with automatic backlight switching according to environmental conditions. The module has an RS-485 interface, IP65 protection and 1.5 W power consumption. It measures 98.42 mm by 94.4 mm by 33.8 mm. Select a supported main station and mounting frame for the complete assembly. This is an information panel, not a touchscreen, call-button module, camera or standalone intercom station.
Hikvision DS-KD7003EY-IME2 2MP Two-Wire Door Station
The Hikvision DS-KD7003EY-IME2 is a 2 MP main door-station module for a compatible two-wire HD intercom system. Its camera has a 133° horizontal field of view, with WDR and infrared supplementary lighting for entrance viewing. The microphone and loudspeaker support conversation, and the call-button arrangement can be adjusted for the installation. Power comes through a compatible DS-KAD7060EY distribution unit or a 12 VDC input. Its two lock-control paths are different: one relay and one DC-pulse output. Select the mounting assembly, indoor station and lock hardware for the complete system. The DS-KD-DIS display module is not supported by this model.
Before you buy
What customers ask most before ordering from this range — and how we deliver.
Which kit is right for me?
Start with three questions: how many areas do you need to cover, do you want colour night vision, and do you want AI alerts that ignore cars and animals? For most homes, a 4-camera 8MP ColorVu or Full-Colour kit is the sweet spot. Not sure? Use our CCTV Advisor — answer a few questions and it recommends a kit — or email us and we'll spec it with you.
Is your Hikvision, Dahua, HiLook and TP-Link VIGI stock genuine Australian stock?
Yes, 100%. Every Hikvision, Dahua, HiLook and TP-Link VIGI product we sell is a genuine Australian-market model sourced through Australian supply chains — never grey imports. That means factory-sealed units, Australian-region firmware that works with the official apps out of the box, and a full 3-year local warranty.
How long does delivery take?
Metro delivery usually takes 2–4 business days after dispatch, and regional areas may take longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
How much is shipping?
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
What warranty do you offer?
All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
What is your return policy?
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Do you offer installation?
We can connect you with licensed installers in Sydney and Melbourne. Installation typically starts from around $200 per camera depending on cable runs and site conditions. Email sales@smarket.com.au with your address and camera count for a quote.
Shop by Brand
Pick your preferred manufacturer ecosystem
Shop by Category
Cameras, recorders, kits and accessories
