All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Metro delivery usually takes 2–4 business days after dispatch, and regional areas may take longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
Hikvision Products
Hikvision DS-PS1-B AX Hybrid Series, Wired External Siren Sounder, IP54, 105DB
The Hikvision DS-PS1-B is a wired external siren sounder from the AX Hybrid range, combining a loud 105 dB sounder with a high-visibility LED strobe to warn and deter when your alarm activates. It wires directly to your control panel and is powered from it, so there is no battery to maintain, and the sound and strobe can be set up to operate separately.
Key points
- Loud 105 dB sounder (measured at 30 cm) with LED strobe
- Wired to and powered from the alarm panel (8-16 VDC, no battery)
- Sound and LED strobe are individually configurable
- Red or blue strobe options to suit the installation
- IP54 splash-resistant PC+ABS housing for sheltered outdoor use
- Front tamper protection; 140 x 134 x 33 mm, 185 g
Hikvision DS-PK1-LRT-HWB LCD Keypad with Card Reader to suit Hardwired Alarm Controller
The Hikvision DS-PK1-LRT-HWB is a wired LCD keypad with a built-in tag reader for AX Hybrid Pro hardwired alarm controllers. It gives users a clear local interface to arm, disarm and check the system - by code or tag - with one-touch arming and dedicated Fire, Panic and Medical emergency keys.
At a glance
- Wired LCD keypad for AX Hybrid Pro controllers (DS-PHA48-EP, DS-PHA64-LP)
- Built-in tag reader for arm and disarm by tag swipe
- One-touch arming and Fire, Panic and Medical emergency keys
- RS-485 Speed-X bus, 2 alarm inputs and 1 alarm output on board
- Manages up to 64 wireless keyfobs (433MHz), 12 VDC powered
Hikvision Ax Pro DS-PDCL12-EG2-WB Wireless 360 Degree PIR Detector
The Hikvision DS-PDCL12-EG2-WB is a wireless 360-degree ceiling PIR detector for the AX PRO alarm system. Mounted overhead, its circular lens covers a whole room out to 12 metres with no blind corners. It uses Tri-X two-way wireless to the hub, runs up to five years on one battery, and is for indoor ceiling mounting.
At a glance
- 360-degree PIR coverage, 12m range, 172 detection zones
- Tri-X two-way wireless (433MHz, AES-128, frequency hopping), up to 1km open-air
- Battery powered (1 x CR123A), up to 5 years standby
- Indoor ceiling mount, 2.4m to 4m mounting height
- Front and rear tamper protection; configured in the Hik-Connect app
Hikvision AX PRO Series DS-PM1-O1L-WB Relay Module
The Hikvision DS-PM1-O1L-WB is a wireless relay output module for Hikvision AX PRO alarm systems. It lets the alarm switch a low-voltage circuit - by an alarm event, a schedule, a fault, or manually from the Hik-Connect app - so you can automate devices such as a gate, a light or an indicator without running a wired output back to the hub.
Key points
- One NO/NC relay output, 0-36 VDC, up to 5 A
- Triggered by alarm, manual app control, schedule or fault
- 433 MHz two-way wireless with AES-128 encryption, up to 800 m
- Flexible DC 7-24 V power input
- Three status LEDs for register/signal, power and relay state
- Compact wall-mount module, 38 x 25 x 18 mm
Hikvision DS-PDP18-EG2 AX Hybrid Series Wired internal 18m PIR detector
The Hikvision DS-PDP18-EG2 is a wired indoor PIR motion detector from the AX Hybrid range, giving 18 metres of volumetric coverage from a slim, unobtrusive housing. It uses a dual-element infrared sensor and a 3D Fresnel lens to detect a moving intruder accurately while ignoring everyday nuisances, and its selectable end-of-line resistors let it wire into almost any hardwired or hybrid alarm panel.
Key points
- 18 m volumetric coverage at an 85.9° detection angle
- Dual-element PIR sensor with 3D Fresnel lens optics
- Creep-zone protection covers the blind spot directly below the unit
- Sealed optical chamber resists insects and false triggers
- Selectable EOL resistors (1K/2K2/4K7/5K6/8K2) suit most panels
- 9-16 VDC wired power with reverse-polarity protection
- Optional pet mask for immunity up to 10 kg
Hikvision AX PRO Series DS-PDD12P-EG2-WB Wireless Dual-Tech Detector
The Hikvision DS-PDD12P-EG2-WB is an AX PRO wireless indoor detector that uses two sensing technologies at once - a passive infrared (PIR) sensor and a 24GHz microwave sensor - and only alarms when both agree. That combination cuts false alarms from heat, sunlight and moving curtains while still catching an intruder from the first step.
At a glance
- Dual-tech PIR + 24GHz microwave, 12m range / 85.9° / 52 detection zones
- Up to 30kg pet immunity with creep-zone protection and digital temperature compensation
- Tri-X two-way wireless to an AX PRO hub, up to 1.2km open-air, AES-128 encrypted with frequency hopping
- Two CR123A batteries, up to 5 years standby; front and rear tamper protection
- Indoor wall mount 1.8-2.4m; optional wall and ceiling brackets
Hikvision AX PRO Series DS-PK1-E-WB Wireless Keypad
The Hikvision DS-PK1-E-WB is a wireless keypad for Hikvision AX PRO alarm systems. It gives you a wall-mounted point to arm in stay or away mode, disarm and clear alarms with a PIN code on its backlit touch keys, plus one-push emergency keys. It links to the AX PRO hub over encrypted 433 MHz wireless and runs on AA batteries, so there is no cabling to run.
Key points
- Full touch keypad with LED backlight for PIN arm/disarm
- Stay and away arming, disarming and alarm clearing
- One-push fire, panic and medical emergency keys
- 433 MHz 2GFSK wireless with AES-128 encryption and frequency hopping
- Battery powered (4 x AA included), up to 2 years' life
- Wireless install with no cabling; configure remotely via app
- Note: PIN keypad only - no built-in tag reader or LCD
Hikvision AX PRO Series DS-PDMCK-EG2-WB Wireless Magnet Shock Detector
The Hikvision DS-PDMCK-EG2-WB is a wireless magnet, shock and tilt detector for Hikvision AX PRO alarm systems. Fitted to a door or window, it catches three kinds of attack: the door or window being opened, the surface being struck or drilled, and the leaf being tilted. It uses encrypted Tri-X wireless and includes two wired inputs to add more sensors.
Key points
- Magnetic opening contact (gap up to 43 mm) plus shock and tilt sensing
- Selectable shock sensitivity (high / normal / low); tilt up to 25 deg
- Two wired alarm inputs (NO / NC / impulse count) for extra sensors
- Tri-X two-way 433 MHz wireless with AES-128; up to 1 km free space
- Front and rear tamper; multi-colour status LED
- Up to 3 years' battery life (1 x CR123A); indoor use
Before you buy
What customers ask most before ordering from this range — and how we deliver.
Which kit is right for me?
Start with three questions: how many areas do you need to cover, do you want colour night vision, and do you want AI alerts that ignore cars and animals? For most homes, a 4-camera 8MP ColorVu or Full-Colour kit is the sweet spot. Not sure? Use our CCTV Advisor — answer a few questions and it recommends a kit — or email us and we'll spec it with you.
Is your Hikvision, Dahua, HiLook and TP-Link VIGI stock genuine Australian stock?
Yes, 100%. Every Hikvision, Dahua, HiLook and TP-Link VIGI product we sell is a genuine Australian-market model sourced through Australian supply chains — never grey imports. That means factory-sealed units, Australian-region firmware that works with the official apps out of the box, and a full 3-year local warranty.
How long does delivery take?
Metro delivery usually takes 2–4 business days after dispatch, and regional areas may take longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
How much is shipping?
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
What warranty do you offer?
All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
What is your return policy?
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Do you offer installation?
We can connect you with licensed installers in Sydney and Melbourne. Installation typically starts from around $200 per camera depending on cable runs and site conditions. Email sales@smarket.com.au with your address and camera count for a quote.
Shop by Brand
Pick your preferred manufacturer ecosystem
Shop by Category
Cameras, recorders, kits and accessories
