Hikvision DS-9664NI-M8 64ch M-Series NVR, 400Mbps, 8K, VGA/HDMI, 8 Bay, 3RU, No HDD
The Hikvision DS-9664NI-M8 is a 64-channel M-Series network video recorder built for large commercial and multi-building sites. It records up to 64 IP cameras at resolutions up to 32MP with 400 Mbps of incoming bandwidth, stores footage across eight SATA bays with RAID, and outputs 8K over HDMI. It has no built-in PoE, so cameras connect through your own network switches, and it is supplied without hard drives.
Key points
- 64 IP channels; 400 Mbps incoming and 400 Mbps outgoing bandwidth
- Records cameras up to 32MP; H.265+ compression
- Eight SATA bays (up to 16TB each) plus eSATA; RAID 0, 1, 5, 6, 10 and N+M hot spare
- No built-in PoE — cameras connect via external network switches
- Dual HDMI (8K) and dual VGA outputs for multi-screen monitoring
- Works with special cameras: people counting, ANPR and fisheye
- 2U rack chassis; hard drives not included; remote view via Hik-Connect
inc GST + 3 Year Warranty & Support
Free shipping over AUD300
Build your setup Build a complete CCTV system Complete setup from $3,310.40
A camera needs an NVR, a hard drive, and cabling to work. Add everything below, or pick a ready-made kit.
3-Year Warranty
Warranty on all cameras
Free Shipping
On orders over $300
30-Day Returns
Easy returns for unopened items
Fast Delivery
5-10 Day Delivery Australia-wide
§ 01Overview
What the DS-9664NI-M8 is
The Hikvision DS-9664NI-M8 is a 64-channel M-Series recorder for large sites that need a high camera count, high resolution and resilient storage on one unit.
It records up to 64 IP cameras at resolutions as high as 32MP, with 400 Mbps of both incoming and outgoing bandwidth, so it suits a busy estate of high-megapixel cameras spread across a building or campus.
Storage is its strength.
Eight SATA bays each take a surveillance drive up to 16TB, and the recorder supports RAID 0, 1, 5, 6, 10 and N+M hot spare, so you can trade some capacity for redundancy and keep recording even if a drive fails.
An eSATA port adds further expansion.
It works with Hikvision's special cameras too, including people counting, ANPR (number-plate) and fisheye models, and drives dual HDMI (up to 8K) and dual VGA outputs for a multi-screen monitoring position.
Two things to plan for.
It has no built-in PoE, so every camera connects through your own managed network switches — the usual arrangement on a 64-channel system.
And it is supplied without drives, so add surveillance storage to suit your retention.
The chassis is a 2U rack unit.
It is genuine Australian Hikvision stock with local warranty and support, viewed remotely on the free Hik-Connect app.
§ 02Engineering
DS-9664NI-M8 specifications
- Records IP cameras up to 32MP with efficient H.265+ compression
- Eight SATA bays (up to 16TB each) plus eSATA — hard drives supplied separately
- RAID 0, 1, 5, 6, 10 and N+M hot spare for resilient storage
- No built-in PoE — cameras connect through your own network switches
- Dual HDMI (up to 8K) and dual VGA outputs for multi-screen layouts
- Works with special cameras: people counting, ANPR and fisheye
- 2U rack chassis; remote view via Hik-Connect; genuine Australian stock, 3-year warranty
§ 03Full datasheet
Detailed specifications
Camera & Image
| Feature | Detail |
|---|
Lens & Distance
| Feature | Detail |
|---|
Night Vision
| Feature | Detail |
|---|
Video
| Feature | Detail |
|---|---|
| IP Video Input | 64-ch |
| Decoding Format | H.265+/H.265/H.264+/H.264 |
| Recording Resolution | 32 MP/24 MP/12 MP/8 MP/7 MP/6 MP/5 MP/4 MP/3 MP/1080p/UXGA/720p/VGA/4CIF/DCIF/2CIF/CIF/QCIF |
| Synchronous Playback | 16-ch |
| Decoding Capability | 2-ch@32 MP (30 fps) + 2-ch@8 MP (30 fps)/10-ch@8 MP (30 fps)/20-ch@4 MP (30 fps)/40-ch@1080p (30 fps) |
Audio
| Feature | Detail |
|---|---|
| Two-Way Audio | 1-ch, RCA (2.0 Vp-p, 1 KΩ, using the audio input) |
| Audio Compression | G.711ulaw/G.711alaw/G.722/G.726/AAC/MP2L2/PCM |
AI & Deep Learning
| Feature | Detail |
|---|
Network & Storage
| Feature | Detail |
|---|---|
| Incoming Bandwidth | 400 Mbps |
| Outgoing Bandwidth | 400 Mbps |
| Network Protocol | TCP/IP, DHCP, IPv4, IPv6, DNS, DDNS, NTP, RTSP, SADP, SMTP, SNMP, NFS, iSCSI, ISUP, UPnP™, HTTP, HTTPS, ONVIF(Version 2.2), OTAP |
| Camera Access Protocol | ONVIF (Version 2.5), RTSP |
| RAID Type | RAID0, RAID1, RAID5, RAID6, RAID10 |
| Capacity | Up to 16 TB capacity for each disk |
Event & Alarm
| Feature | Detail |
|---|---|
| Alarm Input | 16 |
| Alarm Output | 9 |
Interface
| Feature | Detail |
|---|---|
| HDMI 1 Output | 8K (7680 × 4320)/30Hz, 4K (3840 × 2160)/60Hz, 4K (3840 × 2160)/30Hz, 2K (2560 × 1440)/60Hz, 1920 × 1080/60Hz |
| HDMI 2 Output | 4K (3840 × 2160)/60Hz, 4K (3840 × 2160)/30Hz, 2K (2560 × 1440)/60Hz, 1920 × 1080/60Hz; When HDMI 1 output resolution is 8K, the maximum HDMI 2 output resolution is 1080p. |
| VGA 1 Output | 1920 × 1080/60Hz |
| VGA 2 Output | 1920 × 1080/60Hz |
| Video Output Mode | HDMI 1 and VGA 1 provide simultaneous video output, and work as the main output; HDMI 2 and VGA 2 provide simultaneous video output, and work as the auxiliary output |
| CVBS Output | 1-ch, BNC (1.0 Vp-p, 75 Ω), resolution: PAL: 704 × 576, NTSC: 704 × 480 |
| Audio Output | 2-ch, RCA (Linear, 1 KΩ) |
| Network Interface | 2, RJ-45 10/100/1000 Mbps self-adaptive Ethernet interface |
| Serial Interface | 1 RS-485 (full-duplex), 1 RS-232 |
| SATA | 8 SATA interfaces supporting hot-plug |
| eSATA | 1 eSATA interface |
| USB Interface | Front panel: 2 × USB 2.0; Rear panel: 2 × USB 3.0 |
| Ctrl 12V | Controllable 12 VDC, 1 A power output for external alarm device; The power will be turned on when the alarm output is triggered. The Ctrl 12V power is controlled by alarm output 9. |
| DC 12V | 12 VDC, 1 A power output |
General & Environment
| Feature | Detail |
|---|---|
| Power Supply | 100 to 240 VAC, 50 to 60 Hz |
| Consumption | ≤ 50 W (without HDD) |
| Working Temperature | -10 °C to 55 °C (14 °F to 131 °F) |
| Working Humidity | 10% to 90% |
| Chassis | 2U chassis |
| Dimension (W × D × H) | 442 × 462 × 88 mm ( 17.4"× 18.2" × 3.5") |
| Weight | ≤ 10 kg (22 lb) |
| Obtained Certification | CE, FCC |
| FCC | Part 15 Subpart B, ANSI C63.4-2014 |
| CE | EN 55032:2015, EN 61000-3-2, EN 61000-3-3, EN 50130-4 |
§ 04Why choose this
Built for the way you actually use the DS-9664NI-M8
Resilient RAID storage
Eight bays with RAID 0/1/5/6/10 and hot spare keep recording through a drive failure, which matters where lost footage is costly.
Multi-screen control
Dual HDMI up to 8K and dual VGA outputs suit a staffed monitoring room spreading cameras across several screens.
Works with smart cameras
Support for ANPR, people-counting and fisheye cameras lets you add analytics where a site needs more than plain recording.
§ 05Where it fits
Right at home in these scenarios
Large commercial sites
Centralise up to 64 cameras across a building, warehouse or yard on one recorder with resilient RAID storage.
Multi-building and campus
Aggregate cameras from many switches and buildings into a single 64-channel unit fed over the network.
High-resolution estates
Run high-megapixel cameras up to 32MP with the bandwidth and storage headroom a smaller NVR cannot offer.
Sites needing long retention
Fill eight bays with high-capacity drives, with RAID redundancy, for weeks of recording across many channels.
§ 06Setup
Installation & setup
What's in the box
One DS-9664NI-M8 2U recorder, power lead and mouse. Hard drives, network switches, cameras and monitors are not included.
Installation requirements
Fit surveillance-grade SATA drives across the eight bays to suit your retention and RAID plan, connect cameras through managed PoE switches on the network (the recorder has no built-in PoE), then connect monitors over HDMI/VGA and the network for remote access and add it to Hik-Connect. A UPS is strongly recommended on a system this size, and professional installation is advised.
§ 07Questions
Frequently asked about the DS-9664NI-M8
Q.01
Does the DS-9664NI-M8 come with hard drives?
Q.02
Does this NVR have built-in PoE ports?
Q.03
How many cameras and what resolution can it handle?
Q.04
What RAID levels does it support?
Q.05
How many screens can it drive?
Q.06
What switches do I need for the cameras?
Q.07
Can I view it on my phone?
Q.08
Will it work with non-Hikvision cameras?
§ 09Bundles
Recommended packages
Add hard drives (required)
The recorder ships without storage — fit the bays with surveillance drives such as 8TB, 10TB or 6TB units, sized to your retention and RAID plan.
Add Hikvision cameras
Pair it with AcuSense cameras such as the 8MP DS-2CD2086G2-I bullet or the 8MP DS-2CD2T86G2H-2I bullet, powered from your network switches.
Need even more storage?
For the same 64 channels with a sixteen-bay chassis, compare the DS-9664NI-M16.
Smaller systems
For a recorder with built-in PoE for a smaller site, see the 16-channel DS-7616NI-M2/16P or the 8-channel DS-7608NI-M2/8P.
