All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Order before 2pm (Sydney time) on a business day and in-stock items are dispatched the same day. Most orders arrive within 1–4 business days Australia-wide; remote and regional areas can take a little longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
Alarm Detectors
Hikvision DS-PDPC12P-EG2 Wired PIRCAM detector
The Hikvision DS-PDPC12P-EG2 is a wired PIRCAM detector for AX Hybrid Pro alarm systems. It pairs passive infrared motion detection with a built-in camera that captures JPEG snapshots when the alarm triggers, so you or a monitoring centre can confirm what set it off - turning a bare motion alert into a verified event.
At a glance
- PIR motion + built-in camera for image verification (JPEG snapshots on alarm)
- 12m range / 85.9° / 52 detection zones; up to 30kg pet immunity
- 12m infrared fill light with polarising IR lens for clearer low-light images
- Speed-X wired bus to the panel (up to 1km), AES-128 encrypted; 9-16VDC
- Front and rear tamper; indoor wall mount 1.8-2.4m; Hik-Connect app set-up
Hikvision AX PRO Series DS-PDP15P-EG2-WB Wireless PIR Detector
The Hikvision DS-PDP15P-EG2-WB is a wireless indoor PIR motion detector for AX PRO alarm systems. It watches a room for human movement across a wide 85.9 degree field up to 15m, and a Pet mode lets it ignore animals up to 30kg so the alarm is not tripped by the family dog or cat.
At a glance
- Passive infrared detection, 15m range, 85.9 degree angle, 52 detection zones
- Pet immunity up to 30kg when the Pet sensitivity mode is selected
- SEC smart environmental control with 3D optics and digital temperature compensation
- Tri-X two-way wireless on 433MHz, up to 1.2km open-air, AES-128 with frequency hopping
- One CR123A battery, up to 5 years; front and rear tamper; indoor wall mount at 1.8-2.4m
Bosch ISC-BDL2-W12G Blue Line Gen2 TriTech Detector, 12 m
The Bosch ISC-BDL2-W12G is the dual-technology detector for a room with no pets in it: passive infrared and 10.525 GHz microwave Doppler radar over 12 m x 12 m, wall to wall, with an improved lookdown zone under the detector.
What you get
- 1 × ISC-BDL2-W12G detector, white high-impact ABS
You’ll also need
- An alarm panel with a spare zone and a 24-hour tamper circuit
- A cable run from the panel carrying its supply, the alarm relay and the tamper, plus the end-of-line resistors the panel requires
- A bracket if it is not going flat on a wall or into a corner, such as the B338 ceiling mount
Honeywell 2012/24AUSI Photoelectric Smoke Alarm with Sounder
The Honeywell 2012/24AUSI is a low-voltage photoelectric smoke alarm with its own sounder: it wakes the room on its own at 85dB(A), interconnects with up to 24 alarms in total, and reports to a security panel or access control system through a Form C relay.
What you get
- 1 × 2012/24AUSI photoelectric smoke alarm in a low-profile ceiling-white housing
- 1 × mounting ring and a 9 VDC back-up battery, both supplied with the alarm
You'll also need
- A 10 VDC to 30 VDC supply, typically from an alarm panel. The ICP-SOL3-P and CC610P are the panels sold here; check their supply and zone inputs against the figures below
- Four-wire cable from the panel for power and the relay, plus the end-of-line resistors the panel requires
- A ceiling position in the area to be protected, and cable between alarms if they are to interconnect
Bosch ISC-PDL1-W18G Professional TriTech Detector, 18 m x 25 m
The Bosch ISC-PDL1-W18G is the Professional Series TriTech detector for a large commercial space: PIR and 10.525 GHz microwave working together over 18 m x 25 m, switchable down to 8 m x 10 m, with anti-mask supervision and SCEC approval for Australia.
What you get
- 1 × ISC-PDL1-W18G TriTech detector, white, in a high-impact ABS enclosure with a built-in bubble level
You'll also need
- An alarm panel with a spare zone and a 24-hour tamper circuit. The ICP-SOL3-P and CC610P are the panels sold here; check their zone inputs against the figures below
- Cable from the panel carrying 9 VDC to 15 VDC, the alarm relay, the trouble relay and the tamper, sized 0.2 mm² to 1 mm², plus the end-of-line resistors the panel requires
- A bracket if it is not going flat on a wall or into a corner, such as the B338 ceiling mount
Bosch CDL2-15G Commercial Series Gen2 TriTech Detector 15 m
The Bosch CDL2-15G is a hardwired Commercial Series Gen2 TriTech motion detector that pairs passive infrared with a 10.525 GHz microwave Doppler radar over a 15 m x 15 m pattern, and builds the end-of-line resistors, a bubble level and a lift-gate terminal strip into the housing so installation can be faster by up to 45%.
What you get
- CDL2-15G Commercial Series Gen2 TriTech detector (order number F.01U.383.078) — alarm relay, trouble relay and supervised tamper contacts, with DIP-selectable end-of-line resistors on board
You'll also need
- A hardwired alarm system with a 9 VDC to 15 VDC supply and supervised normally-closed inputs matching the detector's alarm, trouble and tamper contacts
- Cable of Ø 0.40 mm to 1.29 mm from the detector to the alarm equipment; its EOL values must match the 1.0 k, 2.2 k or 33 k resistors built into the detector before they can be used
- The optional B338 ceiling-mount bracket for a ceiling position; the B328 gimbal and B335-3 swivel brackets are the angled wall options
Bosch ISC-PPR1-W16 Professional Series PIR Detector, 18 m x 25 m
The Bosch ISC-PPR1-W16 is the Professional Series passive infrared detector for a large indoor commercial space: 18 m x 25 m of coverage, switchable to 8 m x 10 m, with tri-focus optics and sensor data fusion doing the work that keeps false alarms down.
What you get
- 1 × ISC-PPR1-W16 detector in a white high-impact ABS enclosure
- 1 × hardware pack with two flat-head screws, two screw anchors, a nylon cable tie and a pattern mask, plus a literature pack
You'll also need
- An alarm panel with a spare zone and a 24-hour tamper circuit, supplying 9 VDC to 15 VDC. The ICP-SOL3-P and CC610P are the panels sold here; check their zone inputs against the figures below
- Cable from the panel for the 9 VDC to 15 VDC supply, the alarm relay and the tamper, sized 0.2 mm2 to 1 mm2, plus the end-of-line resistors the panel requires
- A bracket if it is not going flat on a wall or into a corner, such as the B338 ceiling mount
Bosch RFSM2-A RADION Wireless Photoelectric Smoke Detector
The Bosch RFSM2-A is a RADION wireless smoke detector for homes that want fire detection on their Bosch alarm panel without running cable: photoelectric smoke sensing plus fixed and fast-rise heat sensing, its own 85 dBA sounder, and supervised reporting to the panel over 433.42 MHz radio.
What you get
- 1 × RFSM2-A detector with the radio module and two CR123A batteries installed
- 2 mounting screws and 2 wall anchors
You'll also need
- A B810 wireless SDI2 bus interface at the panel
- A compatible panel. Bosch lists the G Series B9512G and B8512G, the B Series B6512, B5512, B4512 and B3512, and the GV4 Series D9412GV4 and D7412GV4 at v2.00 or higher; on a Solution 6000 support was added in firmware V2.53.19
- An indoor, dry ceiling or wall position on a flat rigid surface
Before you buy
What customers ask most before ordering from this range — and how we deliver.
Which kit is right for me?
Start with three questions: how many areas do you need to cover, do you want colour night vision, and do you want AI alerts that ignore cars and animals? For most homes, a 4-camera 8MP ColorVu or Full-Colour kit is the sweet spot. Not sure? Use our CCTV Advisor — answer a few questions and it recommends a kit — or email us and we'll spec it with you.
Is your Hikvision, Dahua, HiLook and TP-Link VIGI stock genuine Australian stock?
Yes, 100%. Every Hikvision, Dahua, HiLook and TP-Link VIGI product we sell is a genuine Australian-market model sourced through Australian supply chains — never grey imports. That means factory-sealed units, Australian-region firmware that works with the official apps out of the box, and a full 3-year local warranty.
How long does delivery take?
Order before 2pm (Sydney time) on a business day and in-stock items are dispatched the same day. Most orders arrive within 1–4 business days Australia-wide; remote and regional areas can take a little longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
How much is shipping?
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
What warranty do you offer?
All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
What is your return policy?
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Do you offer installation?
We can connect you with licensed installers in Sydney and Melbourne. Installation typically starts from around $200 per camera depending on cable runs and site conditions. Email sales@smarket.com.au with your address and camera count for a quote.
Alarms by Brand
Compare alarm systems across the range
Security Cameras
Add cameras alongside your alarm system
