Hikvision HiLook HA-ALARM-PIR1-AUS: 18m Wired PIR Motion Detector with 10kg Pet Immunity
The HiLook HA-ALARM-PIR1-AUS is a wired indoor PIR motion detector for intruder alarm systems — the sensor that spots someone moving through a room and tells the panel to alarm. It covers up to 18 metres across an 85.9° field of view, ignores pets up to 10 kg to cut false alarms, and uses selectable EOL resistors so it works with the HiLook AX Hybrid Pro panel and most other wired alarm panels. It is a wired detector, not a wireless one, and needs a control panel to operate.
Key points
- Passive infrared detection: up to 18 m range, 85.9° field of view
- Pet immunity up to 10 kg to reduce false alarms from small animals
- 3D optics, digital temperature compensation and creep-zone protection
- Selectable EOL resistors — compatible with most wired alarm panels, not just HiLook
- Wired connection on 9–16 VDC with reverse-polarity protection; wall or ceiling mount 1.8–2.4 m
- HiLook AX Hybrid Pro range; requires a control panel; 3-year warranty
Delivery, warranty & returns · shipped from Australian stock
- Tracked delivery on every order. The tracking number is emailed as soon as it ships.
- Metro delivery: 2–4 business days. Regional areas may take longer. Free standard shipping over $300, flat $25 under.
- 3-year warranty on cameras and recorders, back-to-base, plus your Australian Consumer Law rights.
- 30-day returns on unopened items. Faulty on arrival? We cover return shipping.
- Genuine Australian stock. Never grey imports. Prices include GST.
All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Metro delivery usually takes 2–4 business days after dispatch, and regional areas may take longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
01Overview
What the HA-ALARM-PIR1-AUS is
The HiLook HA-ALARM-PIR1-AUS is a wired indoor motion detector — one of the sensors that does the actual detecting in an intruder alarm. Mounted in a corner or against a wall, its passive infrared sensor watches for the body heat of someone moving through the space and signals the alarm panel to act. It covers up to 18 metres across an 85.9° field of view, which suits everything from a hallway to a large living room.
To keep alerts genuine, it includes pet immunity up to 10 kg, so a cat or small dog moving through the room is less likely to trip it. 3D optics focus the infrared signal for accurate detection, digital temperature compensation keeps it reliable as the room warms and cools, and creep-zone protection covers the area directly beneath the detector so no one can slip under its view. Sealed optics help keep insects from causing false alarms. It mounts on a wall or ceiling at a height of 1.8 to 2.4 metres and runs on 9–16 VDC with reverse-polarity protection.
Two honest notes. First, this is a wired detector, not a wireless one — it connects back to the panel by cable, which keeps it powered and reliable. Second, its selectable EOL (end-of-line) resistor values mean it is not locked to HiLook; it works with the HiLook AX Hybrid Pro panel and most other wired alarm panels on the market. If your home has dogs heavier than 10 kg, look at the HA-ALARM-PIR2 dual-tech detector, which is pet immune to 30 kg. This is genuine HiLook (a Hikvision sub-brand) stock with a local 3-year warranty and support.
02Engineering
HA-ALARM-PIR1-AUS specifications
- Pet immunity up to 10 kg to reduce false alarms from small animals
- 3D optics and digital temperature compensation for accurate, stable detection
- Creep-zone protection covers the area directly beneath the detector
- Sealed optics to prevent insect-triggered false alarms
- Selectable EOL resistors (alarm and tamper) for most wired alarm panels
- Wired connection on 9-16 VDC with reverse-polarity protection; wall or ceiling mount 1.8-2.4 m
- Requires a control panel (not standalone); genuine HiLook stock with a local 3-year warranty
04Why choose this
Built for the way you actually use the HA-ALARM-PIR1-AUS
Fewer false alarms
Pet immunity to 10kg, 3D optics and sealed anti-insect optics keep alerts genuine.
Works with most panels
Selectable EOL resistors mean it is not locked to HiLook and suits most wired alarm panels.
Stays accurate
Digital temperature compensation and creep-zone protection keep detection consistent and complete.
05Where it fits
Right at home in these scenarios
Living rooms and hallways
Mount it in a corner to cover the main movement paths through the home.
Homes with small pets
Use its 10kg pet immunity to protect rooms without constant false alarms from cats or small dogs.
Wired alarm upgrades
Add room detection to an existing wired panel using the selectable EOL resistors.
New AX Hybrid Pro systems
Fit it as the room detector for a new HiLook HA-ALARM-KIT1 wired alarm.
06Setup
Installation & setup
-
01
What's in the box
One HA-ALARM-PIR1 wired PIR detector with mounting hardware and a guide. A compatible wired alarm panel and cabling are required and supplied separately.
-
02
Installation requirements
Mount it in a room corner at 1.8 to 2.4 metres facing across the space, run the four-wire cable back to a detector zone on your panel, and set the EOL resistor value to match. Walk-test the coverage and confirm the zone alarms before relying on it. Wired alarm work is best carried out by a licensed installer.
08Questions
Frequently asked about the HA-ALARM-PIR1-AUS
Q.01
Is the HA-ALARM-PIR1 wired or wireless?
Q.02
Will my pets set it off?
Q.03
What panels does it work with?
Q.04
How far and wide does it detect?
Q.05
What is creep-zone protection?
Q.06
What is the difference between the PIR1 and the PIR2?
Q.07
Does it need a control panel?
Buying from Smarket
Is your Hikvision, Dahua, HiLook and TP-Link VIGI stock genuine Australian stock?
Yes, 100%. Every Hikvision, Dahua, HiLook and TP-Link VIGI product we sell is a genuine Australian-market model sourced through Australian supply chains — never grey imports. That means factory-sealed units, Australian-region firmware that works with the official apps out of the box, and a full 3-year local warranty.
How long does delivery take?
Metro delivery usually takes 2–4 business days after dispatch, and regional areas may take longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
How much is shipping?
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
What warranty do you offer?
All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
What is your return policy?
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Do you offer installation?
We can connect you with licensed installers in Sydney and Melbourne. Installation typically starts from around $200 per camera depending on cable runs and site conditions. Email sales@smarket.com.au with your address and camera count for a quote.
10Bundles
Recommended packages
Start with a panel
If you are building a new system, the HA-ALARM-KIT1 alarm kit gives you the AX Hybrid Pro control panel and a starter set this detector wires into.
Step up for larger pets
Homes with dogs over 10kg should look at the HA-ALARM-PIR2 dual-tech detector, pet immune to 30kg with far fewer false alarms.
Add a keypad and siren
Control the system from the HA-ALARM-KP-WB keypad and make activations heard with the HA-ALARM-SIREN1 external siren.
Mounting accessory
Use the HA-ALARM-BKT bracket where a detector needs to be angled or repositioned.
