HiLook HA-ALARM-SIREN1 Wired Sounder – 105dB Alarm with LED Flash & IP54 Protection
1 1
Hilook

HiLook HA-ALARM-SIREN1 Wired Sounder – 105dB Alarm with LED Flash & IP54 Protection

SKU: HA-ALARM-SIREN1
Description

The HiLook HA-ALARM-SIREN1 is a wired external sounder for intruder alarm systems — the loud, visible part that turns a triggered alarm into a deterrent. It delivers up to 105 dB of sound at 30 cm and has an independent LED flash, so an activation is both heard and seen. An IP54-rated PC+ABS shell suits indoor or sheltered outdoor mounting, and it runs from the 12 volt siren output of a wired alarm panel. It is a sounder, not a standalone alarm, so it needs a control panel to drive it.

Key points
- Up to 105 dB sound output (measured at 30 cm) for an audible deterrent
- Independent LED flash — sound and visual alert can be configured separately
- IP54 rated for indoor or sheltered external wall mounting
- Runs on 8–16 VDC (typically 12 V) from a wired alarm panel siren output
- Rugged PC+ABS shell, 140 × 134 × 33 mm; works with any compatible 12V panel
- HiLook AX Hybrid Pro range; requires a control panel (not a standalone alarm); 3-year warranty
$24.25 AUD $24.25 AUD $26.00 AUD
Sale 6.73% $1.75 AUD (6.73%)
Business or bulk buyer? Apply for trade pricing →
Found a lower price? We’ll match it →

inc GST + 3 Year Warranty & Support
Free shipping over AUD300

In stock
3-Year WarrantyOn all cameras
Free ShippingOn orders over $300
30-Day ReturnsUnopened items
Fast Delivery1–5 days Australia-wide

§ 01Overview

What the HA-ALARM-SIREN1 is

The HiLook HA-ALARM-SIREN1 is the external sounder for a wired intruder alarm — the loud, flashing box on the wall that makes a break-in obvious and tells an intruder the system has tripped. When the alarm panel triggers it, the sounder produces up to 105 dB of sound (measured at 30 cm) and an independent LED flash, so an activation is both heard and seen, day or night.

It is built to live outside. The PC+ABS housing is IP54 rated against dust and splashing water, which suits indoor mounting or a sheltered external wall — under an eave rather than in driving rain. The LED flash can be configured to operate separately from the sounder, so you can run a visual-only indication if you prefer. It draws power from the panel's siren output on 8–16 VDC (typically 12 V), with a low quiescent draw, and the compact 140 × 134 × 33 mm shell mounts neatly on a wall.

One important note: this is a sounder, not an alarm system in itself. It needs a wired control panel to drive it — any panel with a 12 volt switched siren output, including the HiLook HA-ALARM-KIT1 AX Hybrid Pro panel. If you are building a new system, start with the panel and add this siren, your detectors and a keypad. This is genuine HiLook (a Hikvision sub-brand) stock with a local 3-year warranty and support.

§ 02Engineering

HA-ALARM-SIREN1 specifications

- Up to 105 dB sound output (measured at 30 cm) for an audible intruder deterrent
- Independent LED flash; sound and visual alert configurable separately
- IP54-rated PC+ABS shell for indoor or sheltered external wall mounting
- Power: 8 to 16 VDC (typically 12 V) from a wired alarm panel siren output
- Low current draw: max 70 mA in alarm, ~45 mA quiescent at 12 V
- Operating range -20 C to +60 C; dimensions 140 x 134 x 33 mm; ~185 g; blue shell
- Works with any compatible 12V wired panel, including HiLook AX Hybrid Pro
- Requires a control panel (not a standalone alarm); genuine HiLook stock, 3-year warranty

§ 04Why choose this

Built for the way you actually use the HA-ALARM-SIREN1

Heard and seen

105dB sound plus an independent LED flash makes an activation obvious to neighbours and intruders alike.

Built for outside

An IP54 PC+ABS shell stands up to dust and splashing water on a sheltered external wall.

Easy to wire in

Runs straight from a 12V panel siren output on 8-16VDC, with no separate power supply to add.

Flexible alerting

Sound and flash can be configured separately, so you can run visual-only or both together.

§ 05Where it fits

Right at home in these scenarios

External wall deterrent

Mount it high on a front or side wall so an activation is seen and heard from the street.

Home alarm upgrades

Add a louder external sounder and strobe to an existing wired alarm system.

Garages and sheds

Pair it with a wired panel to give outbuildings an audible and visual alarm.

New AX Hybrid Pro systems

Fit it as the external sounder for a new HiLook HA-ALARM-KIT1 wired alarm.

§ 06Setup

Installation & setup

01

What's in the box

One HA-ALARM-SIREN1 wired sounder with its mounting hardware and a guide. A compatible wired alarm panel and cabling are required and supplied separately.

02

Installation requirements

Mount the sounder high on a sheltered wall, run the siren cable back to your panel's 12V siren output, and wire the flash and sound to the panel program you want. Test an activation and confirm both the sound and LED flash before relying on it. Wired alarm work is best carried out by a licensed installer.

§ 07Questions

Frequently asked about the HA-ALARM-SIREN1

Q.01

Does the HA-ALARM-SIREN1 work on its own?
No. It is a wired sounder, not a standalone alarm. It needs a control panel with a 12-volt siren output to drive it. If you are starting a new system, begin with a panel such as the HiLook HA-ALARM-KIT1, then add this siren and your detectors.
Q.02

How loud is 105dB and where is it measured?
Up to 105 decibels, measured at 30 cm from the sounder. That is a strong, attention-grabbing alert at the wall; like any siren the level falls with distance, so mount it where it will be heard and seen by neighbours and passers-by.
Q.03

Can I mount it outside?
Yes, in a sheltered position. The IP54 rating protects against dust and splashing water, which suits an external wall under an eave or similar cover. It is not designed for full, direct driving-rain exposure, so avoid completely unprotected positions.
Q.04

Which alarm panels is it compatible with?
Any wired alarm panel that provides a switched 12-volt siren output, including the HiLook HA-ALARM-KIT1 AX Hybrid Pro panel and most common wired panels. Check that your panel has a siren output rated for the load before wiring it in.
Q.05

Can the strobe flash without the siren sounding?
Yes. The LED flash is independent and can be configured to operate separately from the sound, so you can set a visual-only indication or run both together depending on how you wire and program the panel output.
Q.06

What power does it need?
It runs on 8 to 16 volts DC, typically 12 volts from the panel's siren output, drawing up to about 70 milliamps in alarm and around 45 milliamps at rest. There is no separate power supply to buy when it runs from a compatible panel output.
Q.07

Is it genuine HiLook with a warranty?
Yes. This is genuine HiLook stock, HiLook being a Hikvision sub-brand, and it comes with a local 3-year warranty and support. Australian orders over A$300 ship free.

§ 09Bundles

Recommended packages

01

Start with a panel

If you are building a new system, the HA-ALARM-KIT1 alarm kit gives you the AX Hybrid Pro control panel and a starter set that this sounder wires into.

02

Add detectors

Trigger the siren from the HA-ALARM-PIR1 18m PIR detector, or the HA-ALARM-PIR2 dual-tech detector for homes with larger pets.

03

Add a keypad

Arm and disarm the system from the HA-ALARM-KP-WB keypad wired LCD keypad with built-in tag reader.

04

Mounting accessory

Use the HA-ALARM-BKT bracket where a detector needs repositioning around the protected area.