All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Metro delivery usually takes 2–4 business days after dispatch, and regional areas may take longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
Hikvision Alarm
Hikvision DS-PM1-I1-WB AX PRO Wireless Input Transmitter | Convert Wired to Wireless
The Hikvision DS-PM1-I1-WB is a wireless input transmitter for AX PRO alarm systems. It bridges one existing wired detector, contact or alarm device into the AX PRO wireless system, so you can reuse proven wired hardware on a modern wireless panel without running new cable back to the hub.
At a glance
- Converts one wired alarm input (PIR, reed, vibration, contact) into a wireless AX PRO zone
- One alarm input, one tamper input, one programmable PGM output, plus a 3.3V output for low-current sensors
- Tri-X two-way wireless on 433MHz (2GFSK), up to 1300m open-air, AES-128
- Three CR123 batteries, up to 5 years; built-in tamper
- Compact module fits inside a wireless-ready detector or beside the wired device
Hikvision DS-PDTT15AM-LM-WB Ax Pro Wireless Outdoor Tri-Tech Detector
The Hikvision DS-PDTT15AM-LM-WB is a wireless outdoor Tri-Tech detector for AX PRO alarm systems. By requiring two PIR sensors and a 24GHz microwave sensor to agree before it raises an alarm, it delivers dependable perimeter detection outdoors while shrugging off the weather, wildlife and moving foliage that defeat ordinary sensors.
At a glance
- Tri-Tech detection: dual PIR plus 24GHz microwave with triple-signal logic
- 15m range, 90-degree angle adjustable up to 180 degrees, 92 zones
- Pet immunity up to 40kg and active IR anti-masking
- IP65 weatherproof, -25 to 60 degrees C, anti-sway analytics
- Tri-X two-way 433MHz to 1km, CR123A x5 up to 5 years
Hikvision DS-PDSMK-S-WB Ax Pro Wireless Photoelectric Smoke Sensor Detector
The Hikvision DS-PDSMK-S-WB is a wireless photoelectric smoke detector for Hikvision AX PRO alarm systems. It gives early warning of a fire with a photoelectric sensing chamber and a built-in 85 dB sounder, while also alerting your AX PRO system and your phone so you are warned whether you are home or away. A sealed 10-year battery means a decade of protection with no recharging.
Key points
- Photoelectric smoke sensing for early fire warning
- Built-in sounder, 85 dB or more at 3 m
- Two-way 433 MHz wireless with AES-128 encryption
- Range up to 800 m in free space
- Sealed 10-year battery (non-replaceable CR17450)
- Ceiling mount; indoor use; red alarm LED
Hikvision DS-PDSMK-4BAR AX PRO WIRED Smoke Detector
The Hikvision DS-PDSMK-4BAR is a wired 4-wire photoelectric smoke detector that adds early fire warning to a 12 VDC intrusion or fire alarm system. When smoke enters its sensing chamber, it raises a built-in sounder and signals the connected alarm panel, so an emerging fire is flagged locally and remotely.
At a glance
- Photoelectric smoke sensing for early, low-nuisance fire detection
- 4-wire conventional connection to 12 VDC alarm panels
- Built-in high-output sounder, approximately 85dB at 3m
- Normally Open (NO) or Normally Closed (NC) relay output
- Dual red LEDs with 360-degree visibility, low-profile ceiling mount
Hikvision DS-PDSK-P AX Hybrid Series Wired Shock Detector
The Hikvision DS-PDSK-P is a wired shock detector for AX Hybrid Pro alarm systems. Fitted directly to a door, window, wall or safe, it senses the vibration of drilling, levering or hammering and raises the alarm during a forced-entry attempt - before an intruder actually gets inside.
At a glance
- Shock sensor detects forced-entry vibration on the protected surface
- Adjustable sensitivity via potentiometer, with gross-attack override
- Advanced digital background-noise filter to reduce false alarms
- Wired NC alarm output, front tamper, blue LED indicator
- 9-16 VDC (typically 12 VDC), 30mA, indoor use
Hikvision DS-PDD12P-EG2 AX Hybrid Series Wired Dual Tech Detector PIR
The Hikvision DS-PDD12P-EG2 is a wired dual-technology indoor detector for AX Hybrid Pro and other hardwired alarm panels. A passive infrared (PIR) sensor and a 24GHz microwave sensor work together and only alarm when both agree, cutting false alarms while still catching movement from the first step.
At a glance
- Wired dual-tech PIR + 24GHz microwave, 12m range / 85.9° / 52 detection zones
- Up to 30kg pet immunity with creep-zone protection and digital temperature compensation
- Normally-closed alarm output with selectable EOL resistors for alarm and tamper
- 9-16VDC wide-voltage input with reverse-polarity protection; front tamper
- Indoor wall mount 1.8-2.4m; optional wall and ceiling brackets
Hikvision DS-PDCM15PF-IR Ax Pro Wireless Outdoor Camera to suit Tri-Tech Detector, IP66
The Hikvision DS-PDCM15PF-IR is a camera module for the AX PRO wireless alarm system. It is not a standalone surveillance camera - it clips onto the AX PRO wireless outdoor Tri-Tech detector and adds visual alarm verification, capturing a short burst of photos when the detector triggers and sending them to the Hik-Connect app and the monitoring centre so a real intrusion can be told apart from a false alarm. Built-in infrared up to 15 m gives images at night, and the module is IP66 for outdoor use.
Key points
- Adds photo verification to the AX PRO wireless outdoor Tri-Tech detector
- Captures a burst of JPEG snapshots on alarm (up to 640 x 480)
- Sends images to Hik-Connect and the monitoring centre (ARC)
- 2 mm lens, 137° horizontal field; colour by day, infrared up to 15 m at night
- IP66 outdoor rated; powered from the detector (3 VDC)
- Requires the AX PRO hub and a compatible wireless Tri-Tech detector
- Not a continuous-video camera and does not connect to an NVR
Hikvision DS-PDC10DM-VG3 Outdoor Directional Dual-Tech Anti-Mask Curtain Detector with EOLR, Slim, IP65
The Hikvision DS-PDC10DM-VG3 is a wired outdoor dual-tech curtain detector for AX Hybrid Pro and general wired alarm panels. It combines a PIR sensor with a 24GHz microwave sensor that must both agree before it alarms, throwing a narrow 5 degree curtain along a wall, window or balcony to catch an intruder at the perimeter - with far fewer false alarms outdoors.
At a glance
- Wired dual-tech detection: PIR plus 24GHz microwave must both trigger, cutting false alarms
- Narrow 5 degree curtain, 10m on wall mount / 6m on ceiling, 32 zones, directional detection
- Active IR anti-masking alarms if the lens is covered or sprayed
- IP65 weatherproof; -25 to 60 degrees; slim body, L-shaped adapter bracket included
- Normally-closed output with selectable EOL resistors; 9-16VDC; front and rear tamper
Before you buy
What customers ask most before ordering from this range — and how we deliver.
Which kit is right for me?
Start with three questions: how many areas do you need to cover, do you want colour night vision, and do you want AI alerts that ignore cars and animals? For most homes, a 4-camera 8MP ColorVu or Full-Colour kit is the sweet spot. Not sure? Use our CCTV Advisor — answer a few questions and it recommends a kit — or email us and we'll spec it with you.
Is your Hikvision, Dahua, HiLook and TP-Link VIGI stock genuine Australian stock?
Yes, 100%. Every Hikvision, Dahua, HiLook and TP-Link VIGI product we sell is a genuine Australian-market model sourced through Australian supply chains — never grey imports. That means factory-sealed units, Australian-region firmware that works with the official apps out of the box, and a full 3-year local warranty.
How long does delivery take?
Metro delivery usually takes 2–4 business days after dispatch, and regional areas may take longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
How much is shipping?
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
What warranty do you offer?
All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
What is your return policy?
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Do you offer installation?
We can connect you with licensed installers in Sydney and Melbourne. Installation typically starts from around $200 per camera depending on cable runs and site conditions. Email sales@smarket.com.au with your address and camera count for a quote.
Security Cameras
Add cameras alongside your alarm system
