Hikvision DS-PM1-I1-WB AX PRO Wireless Input Transmitter | Convert Wired to Wireless
Skip to product information
1
/
of
1
Vendor:
Hikvision
Hikvision DS-PM1-I1-WB AX PRO Wireless Input Transmitter | Convert Wired to Wireless
SKU: DS-PM1-I1-WB
Description
The Hikvision DS-PM1-I1-WB is a wireless input transmitter for AX PRO alarm systems. It bridges one existing wired detector, contact or alarm device into the AX PRO wireless system, so you can reuse proven wired hardware on a modern wireless panel without running new cable back to the hub.
At a glance
- Converts one wired alarm input (PIR, reed, vibration, contact) into a wireless AX PRO zone
- One alarm input, one tamper input, one programmable PGM output, plus a 3.3V output for low-current sensors
- Tri-X two-way wireless on 433MHz (2GFSK), up to 1300m open-air, AES-128
- Three CR123 batteries, up to 5 years; built-in tamper
- Compact module fits inside a wireless-ready detector or beside the wired device
Regular price
$49.00 AUD
Sale price
$49.00 AUD
Regular price
$54.00 AUD
Sale
9.26%
$5.00 AUD
(9.26%)
Delivery, warranty & returns · 3-year warranty · shipped from Australian stock
- Tracked delivery on every order. The tracking number is emailed as soon as it ships.
- Metro delivery: 2–4 business days. Regional areas may take longer. Free standard shipping over $300, flat $25 under.
- 3-year warranty on cameras and recorders, back-to-base, plus your Australian Consumer Law rights.
- 30-day returns on unopened items. Faulty on arrival? We cover return shipping.
- Genuine Australian stock. Never grey imports. Prices include GST.
In stock
No reviews
Hikvision DS-PM1-I1-WB AX PRO Wireless Input Transmitter | Convert Wired to Wireless
1
/
of
1
All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Metro delivery usually takes 2–4 business days after dispatch, and regional areas may take longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
01Overview
What the DS-PM1-I1-WB is
The Hikvision DS-PM1-I1-WB is an AX PRO wireless single-input transmitter that lets you bring an existing wired alarm device into a wireless AX PRO system. Instead of pulling out a working wired detector, contact or switch during an upgrade, you connect it to the transmitter, which reports its signals wirelessly to the hub - preserving the cabling and hardware already in place.
It provides one alarm input and one tamper input, a programmable PGM output for driving a small indicator or triggering an automated response, and a 3.3V output to power a low-current wired sensor. Communication is over Tri-X two-way wireless on 433MHz (2GFSK), rated up to 1300m in open space with AES-128 security, and a built-in tamper reports if the housing is opened. Three CR123 batteries give up to five years of life.
Its compact body is designed to fit inside a wireless-ready detector or to sit beside the wired device or cable termination, so it tucks neatly into the install. Note this is a single-input transmitter: it handles one wired zone. If you need to retain several wired zones, use multiple transmitters or step up to an AX Hybrid Pro controller, and confirm the wired device type, zone behaviour and hub compatibility before fitting. It needs a Hikvision AX PRO hub to receive the signal.
02Engineering
DS-PM1-I1-WB specifications
- Converts one compatible wired detector, contact or switch into a wireless AX PRO alarm zone, so existing wired hardware can stay in use.
- Provides one alarm input, one tamper input and one programmable PGM output, plus a 3.3V output to power a low-current wired sensor.
- Tri-X two-way wireless on 433MHz (2GFSK), rated up to 1300m in open space, with AES-128 security for a stable, supervised link.
- Built-in tamper triggers an alert if the housing is opened or removed, keeping the security loop intact.
- Three CR123 batteries give up to five years of life, with a low-battery warning sent to the hub.
- Compact module fits inside a wireless-ready detector or beside the wired device for a tidy retrofit; single-input design.
- Provides one alarm input, one tamper input and one programmable PGM output, plus a 3.3V output to power a low-current wired sensor.
- Tri-X two-way wireless on 433MHz (2GFSK), rated up to 1300m in open space, with AES-128 security for a stable, supervised link.
- Built-in tamper triggers an alert if the housing is opened or removed, keeping the security loop intact.
- Three CR123 batteries give up to five years of life, with a low-battery warning sent to the hub.
- Compact module fits inside a wireless-ready detector or beside the wired device for a tidy retrofit; single-input design.
03Full datasheet
Detailed specifications
Network & Storage
| Feature | Detail |
|---|---|
| RF frequency | 433MHz |
| RF method | Two-way communication |
| RF modulation | 2GFSK |
| RF distance | 1300m |
Interface
| Feature | Detail |
|---|---|
| Serial port | 1 |
| Power switch | 1 |
| Alarm input | 1 Alarm, 1 Tamper |
| Alarm output | 1 PGM, AM/Output |
| 3.3v Output | 1, up to 10mA |
| Indicator | 3: Alarm/Tamper (Red), Fault (Amber), Signal Strength (Green/Red) |
General & Environment
| Feature | Detail |
|---|---|
| Power supply | 3 CR123 |
| Operation humidity | 10%~90% |
| Operation temperature | –10℃ ~ 55℃ |
| Power consumption | Quiescent current: 40.29 uA | Max current: 47.85mA | Voltage: 3 VDC |
| Battery life span | Up to 5 years (standby time) |
| Installation method | Put inside Wireless Ready Detector |
| Dimension (WxHxD) | 102*41*20mm |
| Weight | 35g(Without Battery), 90g(With Battery) |
| Network & Storage — RF frequency | 433MHz |
|---|---|
| Network & Storage — RF method | Two-way communication |
| Network & Storage — RF modulation | 2GFSK |
| Network & Storage — RF distance | 1300m |
| Interface — Serial port | 1 |
| Interface — Power switch | 1 |
| Interface — Alarm input | 1 Alarm, 1 Tamper |
| Interface — Alarm output | 1 PGM, AM/Output |
| Interface — 3.3v Output | 1, up to 10mA |
| Interface — Indicator | 3: Alarm/Tamper (Red), Fault (Amber), Signal Strength (Green/Red) |
| General & Environment — Power supply | 3 CR123 |
| General & Environment — Operation humidity | 10%~90% |
| General & Environment — Operation temperature | –10℃ ~ 55℃ |
| General & Environment — Power consumption | Quiescent current: 40.29 uA | Max current: 47.85mA | Voltage: 3 VDC |
| General & Environment — Battery life span | Up to 5 years (standby time) |
| General & Environment — Installation method | Put inside Wireless Ready Detector |
| General & Environment — Dimension (WxHxD) | 102*41*20mm |
| General & Environment — Weight | 35g(Without Battery), 90g(With Battery) |
04Why choose this
Built for the way you actually use the DS-PM1-I1-WB
No new cable runs
Tri-X two-way wireless to 1300m means the wired device reports to the hub without pulling cable back to the panel.
Flexible inputs and output
One alarm input, one tamper input and a programmable PGM output cover most retrofit wiring needs.
Tidy, supervised retrofit
A compact body and built-in tamper make for a neat, monitored install that the panel can supervise.
05Where it fits
Right at home in these scenarios
Alarm system upgrades
Bring existing wired zones onto a new AX PRO wireless panel without ripping out the cabling.
Door and window contacts
Give a wired magnetic contact wireless reporting to the AX PRO hub.
Garages and sheds
Connect a wired sensor in an outbuilding where running new cable to the hub is impractical.
Retail and office retrofits
Reuse compatible wired sensors during a move to a wireless system.
06Setup
Installation & setup
-
01
Confirm the wired device
Check the wired detector or contact's output type, zone behaviour and tamper needs, and confirm AX PRO hub compatibility.
-
02
Wire the input
Connect the wired device to the transmitter's alarm input and tamper, using the 3.3V output if the sensor needs power.
-
03
Place and pair
Fit the module inside a wireless-ready detector or beside the wired device, then enrol it to the hub by power-up, remote ID or QR code.
-
04
Set the zone and test
Set the zone behaviour in the Hik-Connect app, then trigger the wired device to confirm the alarm and tamper report through.
08Questions
Frequently asked about the DS-PM1-I1-WB
Q.01
What does the DS-PM1-I1-WB do?
It converts one existing wired alarm device - such as a wired PIR, reed contact or vibration sensor - into a wireless zone on a Hikvision AX PRO system, so you can keep the wired hardware and report it wirelessly to the hub.
Q.02
How many wired inputs can it handle?
One. It is a single-input transmitter. If you need to retain several wired zones, use multiple transmitters or move up to an AX Hybrid Pro controller designed for many wired inputs.
Q.03
Which devices can I connect to it?
Compatible wired detectors, magnetic door and window contacts, switches and similar wired alarm input devices, depending on the system design and the device's output type.
Q.04
Does it need an AX PRO hub?
Yes. It reports wirelessly to a Hikvision AX PRO hub, so it works as part of an AX PRO system rather than on its own.
Q.05
How far can it be from the hub?
Up to 1300m in open space over Tri-X two-way wireless on 433MHz. Walls and obstructions reduce that, so check signal strength at the install point.
Q.06
What is the PGM output for?
It is a programmable output that can drive a small indicator or trigger an automated response within the alarm system, and it can be configured to suit the install.
Q.07
How is it powered and for how long?
Three CR123 lithium batteries give up to five years of standby life, with a low-battery warning sent to the hub.
Q.08
Where is it installed?
Its compact body fits inside a wireless-ready detector or mounts beside the wired device or cable termination point, wherever the signal to the hub is strong.
Buying from Smarket
Is your Hikvision, Dahua, HiLook and TP-Link VIGI stock genuine Australian stock?
Yes, 100%. Every Hikvision, Dahua, HiLook and TP-Link VIGI product we sell is a genuine Australian-market model sourced through Australian supply chains — never grey imports. That means factory-sealed units, Australian-region firmware that works with the official apps out of the box, and a full 3-year local warranty.
How long does delivery take?
Metro delivery usually takes 2–4 business days after dispatch, and regional areas may take longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
How much is shipping?
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
What warranty do you offer?
All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
What is your return policy?
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Do you offer installation?
We can connect you with licensed installers in Sydney and Melbourne. Installation typically starts from around $200 per camera depending on cable runs and site conditions. Email sales@smarket.com.au with your address and camera count for a quote.
10Bundles
Recommended packages
Needs an AX PRO hub
This transmitter reports to a hub - pair it with the DS-PWA96-M-WB hub, or start from the DS-PWA96 alarm kit.
Lots of wired zones?
If you need many wired inputs, an AX Hybrid Pro panel such as the DS-PHA64 (or the AX Hybrid Pro kit) handles wired zones directly.
Add wireless detectors
Expand cover with the wireless dual-tech detector for rooms or the wireless curtain detector for a window line.
Sound and control
Add an indoor siren and a DS-PK1-LT-WB keypad to complete the system.