All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Metro delivery usually takes 2–4 business days after dispatch, and regional areas may take longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
CCTV Accessories
HiLook NS-0105P-35(B) 5-Port PoE Network Switch – 35W Total Budget, Desktop Design
The HiLook NS-0105P-35(B) is a compact 5-port unmanaged PoE switch with four 10/100 Mbps PoE ports and one 100 Mbps uplink port. It powers and connects up to four IP cameras or other PoE devices over a single Ethernet cable each, with a 35 W total power budget and up to 30 W available on a single port. It is plug-and-play, fanless and built in a metal case, with 6 kV lightning protection on every port and an extend mode that reaches 250 m. It is a Fast Ethernet (100 Mbps) switch, not gigabit.
Key points
- 4 x 10/100 Mbps PoE ports plus 1 x 100 Mbps uplink port
- 35 W total PoE budget; up to 30 W on a single port (IEEE 802.3af/at)
- 6 kV lightning/surge protection on all ports
- Extend mode reaches 250 m at 10 Mbps (about 100 m in standard mode)
- Unmanaged plug-and-play; no configuration; MAC auto-learning
- Fanless metal case; 48 V DC; 105 x 27.6 x 83.1 mm; 3-year warranty
HiLook NS-0109P-60 8 Port Fast Ethernet Unmanaged POE Switch
The HiLook NS-0109P-60(B) is a 9-port unmanaged PoE switch with eight 10/100 Mbps PoE ports and one 100 Mbps uplink port, giving a 60 W total power budget and up to 30 W on a single port. It powers and connects up to eight IP cameras or other PoE devices over single Ethernet runs, and is plug-and-play with a fanless metal case, 6 kV lightning protection on every port and an extend mode that reaches 250 m. Like the rest of the range it is Fast Ethernet (100 Mbps), not gigabit.
Key points
- 8 x 10/100 Mbps PoE ports plus 1 x 100 Mbps uplink port
- 60 W total PoE budget; up to 30 W on a single port (IEEE 802.3af/at)
- 6 kV lightning/surge protection on all ports
- Extend mode reaches 250 m at 10 Mbps (about 100 m in standard mode)
- Unmanaged plug-and-play; no configuration; MAC auto-learning
- Fanless metal case; 48 V DC; 170 x 27.6 x 93.1 mm; 3-year warranty
Hikvision HiLook HA-ALARM-KP-WB: Wired LCD Keypad with Built-in Tag Reader and Wireless Transceiver
The HiLook HA-ALARM-KP-WB is a wired LCD keypad for HiLook and Hikvision AX Hybrid Pro alarm systems — the everyday control point your household uses to arm and disarm the alarm. It has a clear LCD display, a built-in tag reader for keyfobs and proximity tags, a built-in 433 MHz wireless transceiver, one-touch arming and dedicated fire, panic and medical keys. It connects to an AX Hybrid Pro control panel and is not a standalone alarm on its own.
Key points
- Wired LCD keypad for HiLook/Hikvision AX Hybrid Pro alarm panels
- Built-in tag reader: arm and disarm by tapping a keyfob or proximity tag
- Built-in 433 MHz wireless transceiver; supports up to 64 keyfobs and tags
- One-touch arming and fire, panic and medical emergency keys
- Tamper protection and clear LED status indicators
- Requires an AX Hybrid Pro panel (such as the HiLook HA-ALARM-KIT1); 3-year warranty
Hikvision DS-1294ZJ-PT Wall Mount Bracket
The Hikvision DS-1294ZJ-PT is a wall mount bracket for mini PTZ dome cameras such as the DS-2DE2A series. Made from plastic and steel with a sprayed Hikvision White finish, it carries up to 3 kg, routes cable internally through a cable hole, and is rated for both indoor and outdoor use.
Key points
- Wall mount bracket for Hikvision mini PTZ domes (DS-2DE2A series)
- Plastic and steel construction, Hikvision White finish
- Maximum load capacity 3 kg (6.6 lb)
- Internal cable hole for concealed wiring
- Suitable for indoor and outdoor installations
- 223.5 mm x 125.8 mm x 80 mm; weight 480 g
Dahua DH-PFA121 Water-Proof Junction Box
The Dahua DH-PFA121 is an IP66 water-proof junction box that mounts a Dahua bullet camera to a wall or pole while hiding and protecting the cabling behind it. The camera fixes to the box, the cables route inside through the bottom or side entry, and the join stays sealed against rain, dust and insects for a tidy, professional outdoor install.
At a glance
- IP66 water-proof aluminium junction box for Dahua bullet cameras
- 134 x 133.5 x 56 mm, G3/4" pipe thread, 3 kg load bearing
- Bottom and side cable entry for flexible, hidden wiring
- White finish to match Dahua bullet camera bodies
- Conceals the RJ45 join and pigtail for a clean finish
Dahua DH-PFA134 Water proof Junction Box
The Dahua DH-PFA134 is a compact, round water-proof junction box that mounts a round-base Dahua bullet camera and hides its cabling behind it. The camera fixes to the box, the cable routes inside, and the join stays sealed against weather - a small, tidy upgrade over leaving the connector exposed at the wall.
At a glance
- Compact round water-proof junction box for round-base bullet cameras
- Aluminium and SECC build, Φ90.0 x 35.0 mm, M20 (G1/2") thread
- 1.0 kg load bearing, white finish to match Dahua cameras
- Seals and conceals the cable join behind the camera
- Supplied with screws, anchors and a waterproof joint
Dahua DH-AC-PFA138 Water proof Junction Box
The Dahua DH-AC-PFA138 is a large, round water-proof junction box for bigger dome, turret and eyeball cameras, with a built-in safety rope hook that holds the camera while you wire and fit it. The camera mounts on the box, the cabling routes inside, and the join stays sealed - with the added safety of a factory lanyard point.
At a glance
- Large round water-proof junction box for bigger dome and turret cameras
- Built-in safety rope hook to lanyard the camera during install
- Aluminium build, Φ161 x 37 mm, G3/4" thread, 3.0 kg load bearing
- Hides and seals the cable join behind the camera
- White finish to match Dahua camera bodies
Dahua DH-AC-PFA136-B BLACK Water-Proof Junction Box
The Dahua DH-AC-PFA136-B is the black version of Dahua's round water-proof junction box for dome and turret cameras. It mounts the camera to a wall or ceiling and hides the cabling behind it, with a black finish that suits dark or black camera bodies and discreet installs.
At a glance
- Black round water-proof junction box for dome and turret cameras
- Aluminium build, Φ110.0 x 34.0 mm, M20 (G1/2") thread
- 1.0 kg load bearing, multiple hole patterns for different bodies
- Hides and seals the cable join behind the camera
- Supplied with screws, anchors and a water joint
Before you buy
What customers ask most before ordering from this range — and how we deliver.
Which kit is right for me?
Start with three questions: how many areas do you need to cover, do you want colour night vision, and do you want AI alerts that ignore cars and animals? For most homes, a 4-camera 8MP ColorVu or Full-Colour kit is the sweet spot. Not sure? Use our CCTV Advisor — answer a few questions and it recommends a kit — or email us and we'll spec it with you.
Is your Hikvision, Dahua, HiLook and TP-Link VIGI stock genuine Australian stock?
Yes, 100%. Every Hikvision, Dahua, HiLook and TP-Link VIGI product we sell is a genuine Australian-market model sourced through Australian supply chains — never grey imports. That means factory-sealed units, Australian-region firmware that works with the official apps out of the box, and a full 3-year local warranty.
How long does delivery take?
Metro delivery usually takes 2–4 business days after dispatch, and regional areas may take longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
How much is shipping?
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
What warranty do you offer?
All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
What is your return policy?
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Do you offer installation?
We can connect you with licensed installers in Sydney and Melbourne. Installation typically starts from around $200 per camera depending on cable runs and site conditions. Email sales@smarket.com.au with your address and camera count for a quote.
Shop by Brand
Pick your preferred manufacturer ecosystem
Shop by Category
Cameras, recorders, kits and accessories
