All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Metro delivery usually takes 2–4 business days after dispatch, and regional areas may take longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
CCTV Accessories
Uniview TR-JB03-I-IN-SE Junction Box for Fixed Dome Cameras
The Uniview TR-JB03-I-IN-SE is the junction box that sits between a turret camera and the wall, hiding the cable joint and giving the tail somewhere to go.
What you get
- 1 × TR-JB03-I-IN-SE junction box, white aluminium alloy, with NPS 3/4" thread
You'll also need
- A camera from the series it is listed for, and the fixings suited to the wall
Uniview TR-WM03-B-IN-V2 Aluminium Wall Bracket
The Uniview TR-WM03-B-IN-V2 is a white aluminium-alloy wall mount bracket for compatible Uniview camera bodies. It suits the IPC31X, IPC361X, IPC363X, IPC353X, IPC351X, IPC352X and IPC3K2X SE series. The bracket measures 188.0 mm x 126.2 mm x 126.2 mm (7.4” x 5.0” x 5.0”), uses a 4 HOLES mounting configuration, weighs 0.45 kg (1.0 lb) and carries a 36 month warranty. This listing is for the mounting accessory only, so a camera is not included.
Suits: IPC3K28SE-ADF28KMC-DL-I0, IPC3638SE-ADZKMC-WP-I
Uniview TR-JB03-H-IN-V2-SE Junction Box for Metal Turret Cameras
The Uniview TR-JB03-H-IN-V2-SE is the junction box for a metal turret camera, and it supports wiring from behind, so the cable can leave through the wall rather than down its face.
What you get
- 1 × TR-JB03-H-IN-V2-SE junction box, white aluminium alloy, three-hole pattern, with NPS 3/4" thread
You'll also need
- A metal turret camera it is listed for, and the fixings suited to the surface
Uniview TR-CM24-IN Ceiling Pendant Mount for Dome Cameras
The Uniview TR-CM24-IN is the ceiling pendant mount that hangs a dome or turret camera below the ceiling, in white aluminium alloy with an NPS 3/4" thread.
What you get
- 1 × TR-CM24-IN ceiling pendant mount, white aluminium alloy, 223.5mm
You'll also need
- A camera of a type it is listed for, and the ceiling fixings suited to the surface
Uniview TR-SE24-A-IN Pendant Extension Pole for Dome Cameras
The Uniview TR-SE24-A-IN is the long pendant pole for dropping a camera below a high ceiling or a soffit, in white aluminium alloy with an NPS 3/4" thread.
What you get
- 1 × TR-SE24-A-IN pendant extension pole, white aluminium alloy, 520mm
You'll also need
- A pendant mounting bracket for the ceiling, and a camera of a type it is listed for
Uniview TR-SE24-IN Pendant Mounting Pole for Dome Cameras
The Uniview TR-SE24-IN is the short pendant pole for dropping a dome or turret camera clear of a ceiling, in white aluminium alloy with an NPS 3/4" thread.
What you get
- 1 × TR-SE24-IN pendant mounting pole, white aluminium alloy, 220mm
You'll also need
- A pendant mounting bracket for the ceiling, and a camera of a type it is listed for
Uniview TR-UP06-IN Pole Mount Bracket for 67mm to 127mm Poles
The Uniview TR-UP06-IN is the bracket for putting a camera on a pole or a rail rather than a wall, with an embrace hoop sized for poles from 67mm to 127mm.
What you get
- 1 × TR-UP06-IN pole mount bracket, white galvanised sheet, with its embrace hoop
You'll also need
- A camera of a type it is listed for, and in most cases the camera's own wall or junction bracket to fix to it
Uniview TR-A01-IN Waterproof Cable Gland, NPT 3/4 inch
The Uniview TR-A01-IN is the waterproof joint that seals where the camera cable leaves a bracket or junction box, with an NPT 3/4" thread.
What you get
- 1 × TR-A01-IN waterproof cable joint, white plastic, NPT 3/4" thread
You'll also need
- The bracket or junction box it threads into, and a cable that fits the gland
Before you buy
What customers ask most before ordering from this range — and how we deliver.
Which kit is right for me?
Start with three questions: how many areas do you need to cover, do you want colour night vision, and do you want AI alerts that ignore cars and animals? For most homes, a 4-camera 8MP ColorVu or Full-Colour kit is the sweet spot. Not sure? Use our CCTV Advisor — answer a few questions and it recommends a kit — or email us and we'll spec it with you.
Is your Hikvision, Dahua, HiLook and TP-Link VIGI stock genuine Australian stock?
Yes, 100%. Every Hikvision, Dahua, HiLook and TP-Link VIGI product we sell is a genuine Australian-market model sourced through Australian supply chains — never grey imports. That means factory-sealed units, Australian-region firmware that works with the official apps out of the box, and a full 3-year local warranty.
How long does delivery take?
Metro delivery usually takes 2–4 business days after dispatch, and regional areas may take longer. You'll receive a tracking number by email as soon as your order leaves the warehouse.
How much is shipping?
Standard shipping is free on all orders over $300 AUD, Australia-wide. Orders under $300 ship at a flat rate of $25, calculated at checkout. Tracking is included on every order.
What warranty do you offer?
All cameras, NVRs and DVRs come with a 3-year back-to-base manufacturer warranty covering defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Hard drives and accessories are covered as set out in our Warranty Policy.
What is your return policy?
You have 30 days from the day you receive your order to request a change-of-mind return. Items must be unopened, factory-sealed and in resalable condition. A 15% restocking fee applies and return postage is at your cost. Faulty or incorrectly supplied items are different: we cover the return shipping and refund or replace at no charge. Read the full Return & Refund Policy.
Do you offer installation?
We can connect you with licensed installers in Sydney and Melbourne. Installation typically starts from around $200 per camera depending on cable runs and site conditions. Email sales@smarket.com.au with your address and camera count for a quote.
Shop by Brand
Pick your preferred manufacturer ecosystem
Shop by Category
Cameras, recorders, kits and accessories
